search for: maxtor

...orage Devices" but I then get the same result (no devices are found). Just to be sure that there are disks available and hardware works I installed a current Debian which works fine. From the BIOS and from Debian shell command "dmesg | grep -i ata" I see that there are two "Maxtor 6Y120L0" installed. Find output of "dmsg" below that email. Is it possible and what steps are necessary to install CentOS 6.4 on that "Maxtor 6Y120L0" hard disks? Regards, Meikel --- Output of "dmesg | grep -i ata" [ 1.690559] pata_via 0000:00:11.1: ve...

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector 20010007 sd 0:0:0:0: SCSI error: r...

Has anyone ever tried to run maxtor's "powermax.exe" program, that attempts to determine if a drive is having problems prior to RMA, under wine? Thanks!

Hi, I am trying to get FreeBSD 4.7 to connect to a Maxtor 5000XT drive, but I get the following when connecting it -> Apr 26 09:19:43 chowder /kernel: fwohci0: node_id = 0xc000ffc1, CYCLEMASTER mode Apr 26 09:19:43 chowder /kernel: firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) Apr 26 09:19:50 chowder /kernel: fwohci0: BUS reset Apr 26 09:19:50...

I have a network accessible (192.168.2.97) Maxtor Shared Storage drive that I want to use to backup the Linux (Slackware) systems on my private LAN. I can "smbmount" the drive okay on my Linux systems, but when I try and use rsync to do a backup rsync fails with a message about failing to change owner. Digging a little deeper into t...

...====================================== Can someone here tell me why, by just changing distributions, I've increased my backup time by about 50%? Both setups use Samba 2.2.5 The system's specs are: Celeron 800 (100MHz FSB) 320MB of PC100 SDRAM NetGear FA311TX 10/100 NIC running at 100Mb/s Maxtor ATA-133 PCI Controller 1-7.5GB ATA-66 IDE HD for the OS 2-40GB ATA-100 IDE HD in Software RAID0 for "/backup" mount point Each Drive is "Master" on own IDE Interface of Maxtor Controller No additional drives on either chain of Maxtor Controller --> I used 'hdparm' t...

...rive heaven very soon... and other said it could be a software doing this and keep an eye on it. then i saw some say about a program called smartctl. is this a program that centos has...if not what is it and where is a good place to get it and is it worth running it? i am running centos 3.5 120gig maxtor. with a 1.8 intel cpu 512 mem. Steven "On the side of the software box, in the 'System Requirements' section, it said 'Requires Windows or better'. So I installed Linux."

...ill be relevant. I look after a community server which has been running just fine for the last 6 months or so with no disk issues at all. The box has an all in one Shuttle motherboard which uses the VIA 8233 ATA133 disk controller according to what I see from dmesg. The main drive is a 30 gig Maxtor and I very recently added an 80 gig Seagate to the second IDE bus. There is also a CDROM sharing the primary IDE bus with the main drive. Up until quite recently the machine has had a single drive in it and been performing flawlessly, no disk problems or anything of that nature (nothing untow...

...nce some problems on my /home partition, (i/o errors on 2 files). After rebooting the machine failed the to mount /home and dropped me in the recovery shell. The fsck is still running after 9 hours. The system is a dual athlon MP with 1Gb ram and ASUS MB. the /home patrition is mounted on 3 120 Gb maxtor disks on ATA 100 bus in RAID 5 (software). The point is: i've heard same problems from another sysadmin switching on vanilla kernel on is RH 8.0 box with ext3.Hello After compiling and booting a RH 8.0 box with a 2.4.19 vanilla kernel i've started to experience some problems on my /home par...

My wife's box has a very intermittent problem, when booting from the Maxtor IDE hard drive. This has been going on for about 2 1/2 years.... The box is a Compaq EVO D300v for the Enterprise. When it boots, there is a SMART advisory from the BIOS that says failure is immenient. Occasionally, it will not boot, because the BIOS does not see the hard drive. I replaced the EID...

Greetings - I'm looking to put some cheap storage into my server, which is running centos 3. I'm looking at the Maxtor SATA/150 PCI Card and a big maxtor sata drive. I would like to make sure that CentOS has driver for this controller. I looked in Red Hat's hardware database and did some google'ing but I couldn't find any info to confirm that this card is compatible. Any ideas where else to look?...

...hat with software Raid 1 on an Asterisk server. Has anyone had any experience with software raid and Asterisk? Also, if the software raid doesn't play, any recommendations for a hardware based IDE Raid controller and suggestions on best practices for setting up the disk partitions (2 X 40 GB. Maxtors) for a mirrored environment would be appreciated. Thanks all -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040821/3fcf5926/attachment.htm

Is it possible to set up a single disk raid (kind of redundant to call a single disk an array) but I've got a single SATA drive in the machine not doing anything. It's a 10k maxtor 74G drive, and what I really want is just to backup two home partitions. I can always reinstall the OS, but the data can't be recovered that easily. The mobo supports raid-0,1 and jbod. Suggestions? -- Snowman -------------- next part -------------- An HTML attachment was scrubbed... URL: &...

Hi All, I'm about to clean and re-initialize a Maxtor 160GB disk that shows a weird problem but I think I've found a bug in RELENG_4_7 somewhere so if preserving my disk can help conquer one more bug I'm happy to wait a couple of days and help solve that bug. Here's the story: While upgrading from 4.3-STABLE to 4.7p4 and at the same time...

...s a webserver, DNS server, MySQL, and recently I installed webmin. The other night I took a peak through webmin to see what kind of things you could do with it and came across this Smart Drive option. Upon further investigation this option appears to show information about my hard drive as the Maxtor drives I have in my server have smart drive capability. They are just a standard IDE drive nothing fancy. When looking at this report I noticed a field called Errors and my Drive had 200 errors. What does this mean? Errors are usually not a good thing. is this a cause for concern? Is there...

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough....

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough....

...to FC2 my server randomly decides that it can no longer access the disk and "aborts" the ext3 journal leaving it read-only as expected. I've seen the same errors on other mail list, explained away as disk or disk cable issues, but in my case all the disks are all brand new 300GB Maxtors. Does anyone have any ideas? Is it because the current kernel can't handle a 288GB partition? BTW the server is completely up to date as per the up2date command including the kernel (2.6.6-1.435.2.3). Start of fsck: ================================================= [root at server /]#...

Slightly off topic, but does anyone have a utility for low level formating Maxtor ATA hard disks that can be booted from PXELinux (either as some kind of binary or as a floppy image)? I just went to get the official tools, but they only have a floppy creator (which won't help me in Linux, or without a floppy drive) and a CD ISO. And it seems 99% of 3rd party software is...

...********************************************************** I have that (to me) crypted errore message.. can anybody tell me what does that UDMA ICRC error means? May 24 19:58:30 saturn /kernel: ad0: DMA limited to UDMA33, non-ATA66 cable or device May 24 19:58:30 saturn /kernel: ad0: 9770MB <Maxtor 91021U2> [19852/16/63] at ata0-master UDMA33 May 24 19:58:30 saturn /kernel: ad1: 19092MB <Maxtor 2B020H1> [38792/16/63] at ata1-master UDMA33 May 24 19:58:30 saturn /kernel: Mounting root from ufs:/dev/ad0s1a May 24 19:58:30 saturn /kernel: ad1s1a: UDMA ICRC error reading fsbn 32 of 16-...