search for: mailboxdetails

I posted earlier in the day about needed help with IAX trunking. I did some more reading and made some more changes. Here is what I have thus far: Iax.conf on one server [general] bindport = 4569 bindaddr = 0.0.0.0 disallow=all allow=ulaw allow=alaw allow=gsm mailboxdetail=yes [vvfarm] type=friend username=colo secret=testpassword auth=plaintext host=64.194.211.170 context=iax-incoming

Hi everyone, I am trying to connect 2 asterisk servers via IAX, but it just fails to do so.. I'm using SIP to connect the IP phones on the LAN at the 2 different physical locations where each server resides and I'm able to communicate on my LAN via SIP without any issues. The problem is that I'm unable to make Asterisk servers talk with each other via IAX.. Here is my issue.

...n nothing from http://bbs.atcom.cn on this so far. Perhaps someone on the list has experience with this. Is there a way to get MWI support for PA168V-based ATAs? Apparently some IP phones based on the PA168V chip has this support already (Atcom AT-320 for example) by configuring Asterisk with 'mailboxdetails=yes' in iax.conf. On my ATA, however, it does nothing. Any insights are appreciated.

In my IAX config file I have: [general] bindport = 4569 ; Port to bind to (IAX is 4569) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) delayreject=yes disallow=all allow=ulaw allow=gsm jitterbuffer=yes forcejitterbuffer=yes mailboxdetail=yes dropcount=3 minexcessbuffer=80 jittershrinkrate=1 notransfer=yes allanrobertson- 209.23.224.97 (D) 255.255.255.255

Hi, I have a customer who experiences, once in a while, one-way audio... That is... they can hear the person they called, but the person can not hear them. The customer is connected via IAX2 to our softswitch. On the customer's end I have the following config in iax.conf: [general] bindport = 4569 ; Port to bind to (IAX is 4569) bindaddr = 0.0.0.0 ; Address to bind to (all

I'm going to try and lay out all the relevant information I have here in this one post. I can provide more info if necessary. ISSUE 1: Office A routinely looses connection to Office B. When typing IAX2 Show Peers, it will show as Unreachable. I issue IAX2 Reload and it will work again for 1-3 days (haven't narrowed the time down yet). My theory is that the DSL at Office2 is changing

Hello List, I am currently having a bit of a strange issue with a pair of asterisk servers that we recently set up. For a bit of background, this particular business has two sites in two different towns, about 10 minutes apart. They have 3 analogue PSTN lines connected to the asterisk servers at each location, via a Sangoma A200 (with HEC). They are trying to have just the one receptionist for

Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing

Hello, I have just set up an asterisk box (Debian unstable) and I would like to test it with a H.323 application (gnomemeeting). When I call the demo voice menu, I can't hear any sound. asterisk says that the soundfile is played: -- Executing BackGround("H323/ip$212.9.189.172:30005/29597", "demo-congrats") in new stack -- Playing 'demo-congrats' (language

Hi, My asterisk sometimes stop responding to iax calls. In the log, I've found this: Mar 29 13:35:45 DEBUG[8386] channel.c: Avoiding initial deadlock for 'IAX2/trunkjstpcn-3' Mar 29 13:35:45 DEBUG[13002] chan_sip.c: update_call_counter(1409) - decrement call limit counter Mar 29 13:35:45 DEBUG[8386] channel.c: Avoiding initial deadlock for 'IAX2/trunkjstpcn-3' Mar 29

Have asterisk@home 1.2.1 The server is on an internal network eg 10.10.10.10 It is NAT'd 1:1 via Checkpoint firewall to external public IP eg 50.50.50.50 The remote IAX2 phone (ATCOM320) is configured to call 50.50.50.50 on extension 1055. Outbound calls to 1055 work perfectly. Inbound calls from 1055 get picked up as if it were an external call (see below) and goes straight to the ring

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

Hi, I have strange problem. I have 1 SIP client (bt100) and 1 Iax2 client (IAXPhone): - when I call from Iax to SIP sound works - when I call from Sip to Iax sound doesn't work, I get : Jan 25 13:52:22 NOTICE[31334]: channel.c:1314 ast_read: Dropping incompatible voice frame on IAX2/200/1 of format gsm since our native format has changed to ulaw Why is Asterisk not satisfied with gsm

hello, I am in test time about my Asterisk server.when my server is running, the client bob can't connect to it. the server say : "chan_iax2.c:3865 register_verify: No registration for peer 'bob'" "chan_iax2.c:5390 socket_read: Rejected connect attempt from 192.168.0.204" How can I resolve this problem ? I joined my configuration files there : EXTENSIONS.CONF :

I have experienced a * problem with all "forwarded" calls where the inbound caller cannot hear any audio for 2-4 seconds after the forwarded call is answered, causing the caller--who cannot hear anything--to think there is no connection and thus hangs up. If the caller waits a couple of seconds, audio is restored and everything is OK. The problem didn't seem to be there when I first

Hi, I've tried to upgrade my asterisk to 1.2.3 again after disastrous bug incident yesterday but when I called and the phone was picked up, there was simply busy tone... Weird, is this another bug in asterisk 1.2.3? Currently, I rollback again to asterisk 1.0.10...:( Is there any configuration change issue in 1.2.3 cause I've just used my configuration that worked in asterisk1.2.2 ?

Hi all, I have a VOIP phone with the PA1688 chip; my firmware is V1.42.028. This IP phone is registered in an Asterisk PBX and I've a problem when I dialing internal number. If I dial an internal number, like for example 102, the IP phone takes 35 seconds to send the number to Asterisk; here below the debug output 192.168.0.75: first 192.168.0.75: 1 192.168.0.75: 10 192.168.0.75: 102

On the subject of faxing - is there a way to interface Asterisk and Hylafax running on the same box? I have tried the directions at- http://www.voipinfo.org/wiki/view/T38modem+configuration+with+Asterisk and I just can't get it to work. Does anyone know of a way? (Even mention paid software)... Michael

Hello! I have a number of IAX clients behind a NAT (on the same LAN) and asterisk server on the Internet. And that clients doesn't speak directly to each other, traffic goes through the asterisk server. What should I configure to make IAX clients on the same LAN to speak directly, please? notraster=no is set in iax.conf The asterisk server is on real IP behind a NAT (at DMZ with full 1-to-1

I am having a problem with your my nufone service. I'm trying to setup incoming calls and I'm having no success. Outgoing works fine though. The message I'm getting is "the person you are call is not currently reachable". I'm going to give you as much info as I can. I'm also an asterisk newb! Anyways, I installed asterisk@home. Set up extensions which communicate