search for: machinea

Dear list, I'm relatively new to using ssh. I'm trying to use the -R option to set up a forwarded port between two machines. Specifically I'd like to be able to ssh to machineB from machineA and then have a port on machineB that I can connect to machineA with. If my understanding is correct I'd need a command like: machineA> ssh -R 10000:machineA:23 machineB This should open port 10000 on machineB to be forwarded to machineA:23, right? Assuming I have telnet open on machineA...

...#39;s (10.20.30.1 and 10.20.40.1). I have confirmed that port 655 is open because each machine can ping the other on the LAN ip address (192.168.1.x) and "telnet 192.168.1.x 655" works on both machines (x=4 on one machine and 8 on the other) (it responds with "0 MachineB 17" on MachineA and "0 MachineA 17" on MachineB. ipconfig /all confirms that each computer can see itself on the 10.20.x.1 addresses. tracert gets me nothing my hosts files now look like this: MachineA Address = 192.168.1.4 Subnet = 10.20.30.0/24 -----BEGIN RSA PUBLIC KEY----- ----------------------...

I'm using the very latest 'version 3.0.1pre3 protocol version 30', on both ends, and have seen a date/time discrepancy in the log on the receiver. The sending machine (machineA) is in US CDT while the receiver is in US PDT. Both sender and receiver have their time set correctly. a contiguous snippet from the log on the receiver : (note the first three timestamps are correct:) > 2008/04/02 22:18:17 [3707] connect from machineA (YY.YY.YY.YY) > 2008/04/02 22:18:17 [...

I had a quick look for an answer to what I'd presume is a common Q but failed so wondering if somebody here would point me in the right direction, please & thanks?! I wish to use rsync to backup users' home dirs from machineA (Debian) to machineB (Fedora). I have a script, say backup.sh, in my own home dir and linked to from /etc/cron.daily and have set up the ssh keys so root@machineA can rsync to localUser@machineB. In testing the script is run and files are transferred. However, they are owned by localUser (of machin...

...neB.com:/etc /backup/machineB.com/etc This works flawlessly. When I run an rsync over ssh from Machine C to Machine A with the following: rsync --verbose --progress --stats --compress --rsh=/usr/bin/"slogin -l root -o Compression=yes" --recursive --times --links --perms --owner --group machineA.com:/etc /backup/machineA.com/etc The following occurs: All directories on Machine A /etc are replicated on Machine C /backup.../etc, however when the process starts to transfer files from Machine A, I get: receiving file list ... 650 files to consider etc/ etc/.pwd.lock 30888880 0% 8.82MB/s...

...at using an additional environmental variable, e.g. SMBUSER, would make life easier for such users. This variable could be set once in a user's startup files, and they would no longer need to enter the '-U' option each time they used a Samba client. For example, user 'johnd' on machineA has an acount on machineB called 'jdoe'. Our user need only set SMBUSER equal to 'jdoe' in his startup on machineA, and he no longer needs to type it everytime. If the SMBUSER variable is not set, Samba would default to the current behavior. When it is set, that name is used. The &...

...Howver there are some users that are closer to machine B, and I would like to be able to have the homes of those users on machine B rather than machine A (they should authenticate on machine A anyway). Is this possible without a mount of the users (those I want on machineB) home directories on machineA. Using the usrmgr.exe it looks like it should be possible to change the location of the homes (\\serverB\username), but the change does not take effect. I do not use ADS, just plain regular samba. trying to set path = \\machineB\homes results in an ERROR message: tree connect failed: NT_STATUS...

...l(IAX2/machineB/${EXTEN:1}@mycontext) exten => _9.,2,NoOp(DIALSTATUS=${DIALSTATUS}) exten => _9.,3,Hangup On machineB I have something like this: [mycontext] exten => 2002,1,Dial(SIP/2002,60) exten => 2002,2,NoOp(DIALSTATUS=${DIALSTATUS}) exten => 2002,3,Hangup If I use a phone on machineA to dial 92002, then of course 2002 rings. If 2002 is busy, then on machineB's console I see the NoOp command with DIALSTATUS=BUSY, as expected. However, on machineA's console I see DIALSTATUS=NOANSWER. If I change machineB to this: [mycontext] exten => 2002,1,Dial(SIP/2002,60) exten...

Hi, This might be a very basic question, but since i''m new to rails, can you please let me kow how to do this. My app is like this i have a menu in the left side which says "Status" and if i click this link i have a static menu displayed like this "MachineA" MachineB" and "MachineC" Upon clicking any of those machines i need to display a bunch of information corresponding to that link. Say how much is RAM, HardDisk, OS etc of each machines for the corresponding link. I have these details captured in a properties file like env=...

...PEGASUS and ^[ are part of the message, I did not add them. If you count them there are 16 total including ending ^[. I can't figure out where the spaces are coming from. This is the same for every Samba server. Each machine will show this message for the other servers but not itself. MachineA will show message for B and C, but not A. MachineB will show message for A and C but not B. Servers are Fedora release 20 and 21, Samba versions are 4.1.12 and 15. 46856 Feb 25 13:22:19 zaphod nmbd[32208]: [2015/02/25 13:22:19.194541, 0] ../source3/nmbd/nmbd_workgroupdb.c:57(name_to_unstring)...

Has anyone used Agent Forwarding in 3.4p1? We can't seem to get it working under Solaris 2.6 or 8 (Sparc).

Perhaps a stupid question, but i will give it a try: I have two machines on libvirtd session and network on usermod. Can i (somehow) cross these two machines ? machineA: ip addr add 10.10.10.101/24 dev eth0 ip route add default via 10.10.10.102 dev eth0 machineB: ip addr add 10.10.10.102/24 dev eth0 ip route add default via 10.10.10.101 dev eth0 -- Evaggelos Balaskas - Unix System Engineer http://gr.linkedin.com/in/evaggelosbalaskas

...u count them there are 16 total >>>> including ending ^[. I can't figure out where the spaces are coming >>> from. >>>> This is the same for every Samba server. Each machine will show > this >>>> message for the other servers but not itself. MachineA will show > message >>>> for B and C, but not A. MachineB will show message for A and C but > not B. >>> >>> I can count 17 characters... >> >> here you go: >> https://bugzilla.redhat.com/show_bug.cgi?id=1175710#c10 > > I understand t...

...t; message, I did not add them. If you count them there are 16 total >> including ending ^[. I can't figure out where the spaces are coming > from. >> This is the same for every Samba server. Each machine will show this >> message for the other servers but not itself. MachineA will show message >> for B and C, but not A. MachineB will show message for A and C but not B. > > I can count 17 characters... here you go: https://bugzilla.redhat.com/show_bug.cgi?id=1175710#c10 > According to Microsoft: > > "The NetBIOS naming convention allows for 1...

Hello, I wanted to fit a linear mixed model to a data that is similar in terms of design to the 'Machines' data in 'nlme' package except that each worker (with triplicates) only operates one machine. I created a subset of observations from 'Machines' data such that it looks the same as the data I wanted to fit the model with (see code below). I fitted a model in

...t;>> including ending ^[. I can't figure out where the spaces are > coming >>>>> from. >>>>>> This is the same for every Samba server. Each machine will show >>> this >>>>>> message for the other servers but not itself. MachineA will show >>> message >>>>>> for B and C, but not A. MachineB will show message for A and C but > >>> not B. >>>>> >>>>> I can count 17 characters... >>>> >>>> here you go: >>>> https://bug...

...en I installed icecast and ices on the same machine. I then switch machines and have icecast in machine A, ices in machine B, connecting to icecast using mountpoint <mount> to machine A. Now I can't figure out how to have those information through the web again. When I browse: http://machineA:port/admin I got "403 FORBIDDEN You don't have access to this entity (stream or file)" How do I get this to work? Is this information available on the machine that running icecast (the streamer server) or the one that running ices (the streamer client) ? if yes, where? I looked t...

...add them. If you count them there are 16 total > >> including ending ^[. I can't figure out where the spaces are coming > > from. > >> This is the same for every Samba server. Each machine will show this > >> message for the other servers but not itself. MachineA will show message > >> for B and C, but not A. MachineB will show message for A and C but not B. > > > > I can count 17 characters... > > here you go: > https://bugzilla.redhat.com/show_bug.cgi?id=1175710#c10 I understand the limit is 15. However, in the case I i...

Steve Bonds [mailto:knnf6cy7w001@sneakemail.com] wrote: >I couldn't get the ssh tests to work in rsync 2.5.6 and it doesn't appear >that they ever could have worked. There were two problems with the script >I noticed: > >1) The "from" directory is never populated with files to test. It looked >like the "hands_setup" function from rsync.fns was

My question concerns the logic behind hypothesis tests for fixed-effect terms in models fitted with lme. Suppose the levels of Subj indicate a grouping structure (k subjects) and Trt is a two-level factor (two treatments) for which there are several (n) responses y from each treatment and subject combination. If one suspects a subject by treatment interaction, either of the following models seem