search for: m1024

On my C5 machine (a Dell XPS420) I have a 500Gb disk on the internal SATA controller. I also have a SiI3132 dual-port multi-device eSATA card. This is connected to an external SATA array of disks. Now occasionally I see something like this in my logs ata7.01: exception Emask 0x0 SAct 0x0 SErr 0x0 a ction 0x0 ata7.01: irq_stat 0x00060002, device error via D 2H FIS ata7.01: cmd

...ode 0 alloc kstat_irqs on node 0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc <...> ata1: SATA max UDMA/133 abar m1024 at 0xdfefa400 port 0xdfefa500 irq 22 ata2: SATA max UDMA/133 abar m1024 at 0xdfefa400 port 0xdfefa580 irq 22 I've included the above, because I note the 32bit mmio, but the 64bit flag; also the clock speed for the controller. Now, I've been working on one with Penguin. I noticed one thing...

...GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff900 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff...

...225 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ff900 irq 225 ata2: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ff980 irq 225 ata3: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ffa00 irq 225 ata4: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ffa80 irq 225 ata1: softreset failed (device not ready)...

...225 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ff900 irq 225 ata2: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ff980 irq 225 ata3: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ffa00 irq 225 ata4: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ffa80 irq 225 ata1: softreset failed (device not ready)...

Hello! I'm having problems getting PCI pass-through to work. This is on a AMD64 system, paravirtualized with xen-hypervisor-4.0-amd64 4.0.0-1~experimental.1, dom0: linux-image-2.6.32-5-xen-amd64 2.6.32-12. From IRC, earlier today: <tschwinge> waldi: Aren't the Debian xen domU-capable kernels supposed to contain the PCI frontend (needed for PCI pass-through)? I'm getting:

Hello! I'm having problems getting PCI pass-through to work. This is on a AMD64 system, paravirtualized with xen-hypervisor-4.0-amd64 4.0.0-1~experimental.1, dom0: linux-image-2.6.32-5-xen-amd64 2.6.32-12. From IRC, earlier today: <tschwinge> waldi: Aren't the Debian xen domU-capable kernels supposed to contain the PCI frontend (needed for PCI pass-through)? I'm getting:

...ode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata3: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024 at 0xfe7ff800 port 0xfe7ffa80 irq 22 Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Int...

...cksumming: ko] > [ 1.488749] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo > pmp pio slum part ccc > [ 1.490977] scsi0 : ahci > [ 1.492030] scsi1 : ahci > [ 1.494136] scsi2 : ahci > [ 1.494821] scsi3 : ahci > [ 1.495406] ata1: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port > 0xf9fffd00 irq 22 > [ 1.496404] ata2: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port > 0xf9fffd80 irq 22 > [ 1.497415] ata3: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port > 0xf9fffe00 irq 22 > [ 1.498417] ata4: SATA max UDMA/133 abar m1024 at 0xf9f...

...0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.255790] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part [ 1.261452] scsi2 : ahci [ 1.261728] scsi3 : ahci [ 1.261914] scsi4 : ahci [ 1.262104] scsi5 : ahci [ 1.263041] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 21 [ 1.263046] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 21 [ 1.263050] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 1.263055] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 1.50...

...eatures [frames: 9200 bytes, tx checksumming: ko] [ 1.488749] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.490977] scsi0 : ahci [ 1.492030] scsi1 : ahci [ 1.494136] scsi2 : ahci [ 1.494821] scsi3 : ahci [ 1.495406] ata1: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port 0xf9fffd00 irq 22 [ 1.496404] ata2: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port 0xf9fffd80 irq 22 [ 1.497415] ata3: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port 0xf9fffe00 irq 22 [ 1.498417] ata4: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port 0xf9fffe80 irq 22 [...

Hi all, I recently bought a Intel D2500HN motherboard with Intel GMA 3600 video card. I want to install FreeBSD 9-Release on it via PXE, but after booting the system, it seems that video card driver doesn't work properly. Have a look at this picture: http://img703.imageshack.us/img703/5648/20120714393.jpg I've tried the # vidcontrol 80x25 but unfortunately it doesn't help. Do

Hi Konrad, Today i tried linuses tree of today (last commit is 4c4d285ad5665bfbd983b95fde8d7a477d24a361). It boots dom0 fine, but it fails to start any domU with: "Error: Failed to query current memory allocation of dom0." With my previous 3.1.5 kernel everything is fine, nothing else changed in config in between. dmesg and xm dmesg attached -- Sander Dom0 shows: total

...4:41 placka kernel: [ 1.911958] scsi2 : ahci Jul 16 12:54:41 placka kernel: [ 1.916296] scsi3 : ahci Jul 16 12:54:41 placka kernel: [ 1.918232] scsi4 : ahci Jul 16 12:54:41 placka kernel: [ 1.918470] scsi5 : ahci Jul 16 12:54:41 placka kernel: [ 1.918647] ata1: SATA max UDMA/133 abar m1024 at 0xfeb4f000 port 0xfeb4f100 irq 19 Jul 16 12:54:41 placka kernel: [ 1.918654] ata2: SATA max UDMA/133 abar m1024 at 0xfeb4f000 port 0xfeb4f180 irq 19 Jul 16 12:54:41 placka kernel: [ 1.918661] ata3: SATA max UDMA/133 abar m1024 at 0xfeb4f000 port 0xfeb4f200 irq 19 Jul 16 12:54:41 placka ker...

Include logs from the failed boot On Jun 11, 2015 10:55 PM, "Andre Campos Rodovalho" < andre.rodovalho at gmail.com> wrote: > Hello, I'm facing issues with a Point of View GT210/218 and nouveau > drivers. I'm using ubuntu server with LXDE on top of it... > > *lshw -c video* output: > *-display > description: VGA compatible controller >