search for: lxde

Hi all, anyone know when lxde will be available for centos? Fedora lxde was nice but its end of life is far to short for a server. Thanks Gary.

...Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at efff0000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 2.0 Kernel driver in use: nouveau symptoms: Clicking a little around (opening/closing some windows from lxde's menu or launcher) makes the UI hang quickly, usually after 10 seconds or less. After a while (maybe 20 or 30 secs) the system reacts to me having pressed or pressing ctrl+alt+F1 and I create log from that console. In case that I haven't pressed that shortcut yet, the display is almost unu...

I'm the founder and lead developer of the lightweight Linux distro Swift Linux. I'm currently in the process of switching from the old antiX Linux base to the new Linux Mint Debian Edition base. The new Swift Linux will be using LightDM instead of SLiM. I've found that replacing LMDE's default GDM display manager with SLiM disables many functions (like audio). Restoring these

...t;/dev/null 2>&1 && /sbin/upsdrvctl shutdown ----------------------------------------------------------------------------------- DD. Does wall successfully notify the users on an Ubuntu system? If you type echo "Hello from wall" | wall do the users of Gnome, KDE, LXDE, LightDM etc see the message? ==> Yes. I used the putty and got below 3 messages (Battery Power / Power Resotre / and type commands directly) D1. Broadcast Message from dinow-Al (somewhere) at 10:59 ... UPS pcmups at localhost on battery D2. Broadcast Message from dinow-Al...

...7.x box: $ yum list available | grep -y compiz compiz.x86_64 1:0.8.8-27.el7.nux nux-dextop compiz-debuginfo.x86_64 1:0.8.8-27.el7.nux nux-dextop compiz-devel.x86_64 1:0.8.8-27.el7.nux nux-dextop compiz-lxde.x86_64 1:0.8.8-27.el7.nux nux-dextop compiz-mate.x86_64 1:0.8.8-27.el7.nux nux-dextop compiz-xfce.x86_64 1:0.8.8-27.el7.nux nux-dextop looks as if it's not available for Gnome. I also vaguely recal...

...he ups.delay.start: 60 comes from. The NUT default value is 30 secs, and you do not change the value in ups.conf. > DD. Does wall successfully notify the users on an Ubuntu system??? If you > type > > ??? echo "Hello from wall" | wall > > do the users of Gnome, KDE, LXDE, LightDM etc see the message? > > ==> Yes. I used the putty and got below 3 messages > (Battery Power / Power Resotre / and type commands directly) > > > D3. Broadcast Message from dinow-Al > ??????? (/dev/pts/0) at 11:02 ... > > Hello from wall I'm guessing t...

Lubuntu 11.10 + LXDE, Wine 1.3.28 , Winetricks 0.0+20110229 I am trying to install hMailServer 5.3.3 . The hMailServer installer warns "it appears another mail server is already running, you should close it", but there is no other mail server running. The warning should read "you can only bind to privil...

...e changed by editing a > file: > > ~/.config/gtk-3.0/settings.ini > > [Settings] > gtk-primary-button-warps-slider=0 > > You may have to create this file. Firefox is a good GTK application to > verify that the setting works. I use it on a CentOS 7 system which uses > LXDE for the desktop. > > In Fedora there is an item in Settings which can control this. It is in > the System Settings application: Appearance - Application Style - Gnome > Application Style and is called "On left-clicking the scroll bar". > > As for your first question, I...

...rap "exit 0" SIGTERM > if [ "$NOTIFYTYPE" = "ONLINE" ] > then > echo $0: power restored | wall Does wall successfully notify the users on an Ubuntu system? If you type echo "Hello from wall" | wall do the users of Gnome, KDE, LXDE, LightDM etc see the message? > ??? fi??? 6. File =upssched.conf > ??????? CMDSCRIPT? /bin/upssched-cmd > ??????? PIPEFN? /var/run/nut/upssched/upssched.pipe > ??????? LOCKFN? /var/run/nut/upssched/upssched.lock It doesn't look as if upssched will be called, since your NOTIFYCMD i...

...cp-host=judge The specific problem I'm having is that of the virtual 'clients', only one of them is getting assigned an IP address from the list in /etc/hosts. 'asmodean', running Ubuntu 9.10 gets its IP address of 10.0.0.2 as planned. The other two, demandred (running F12+LXDE) and lanfear (running Debian 5.03 Lenny), get randomly assinged IP addresses from the pool defined in dnsmasq.conf (10.0.0.50-10.0.0.100) like one would normally expect for a *dynamically* assigned lease. Except I wanted them to get fixed leases based on /etc/hosts. I've looked at most ev...

...er provides a corrupted display when booting to a PC with an older nvidia FX5200 graphic card. This was tested with: * openSUSE-12.3 32-bit beta1 KDE liveCD and 3.7.1 kernel * openSUSE-12.3 32-bit RC1 KDE liveCD and 3.7.6-1.2 kernel * openSUSE-12.2 with the 32-bit Tumbleweed 3.7.2-18 kernel (on an LXDE desktop) * Porteus-1.2 (release candidate version) which has the 3.7.5 kernel (and is slackware based). * Bodhi-2.2.0-32 which has the 3.7.0-7 kernel (and is Ubuntu based) I rolled back the openSUSE-12.2 with the 32-bit Tumbleweed 3.7.2-18 kernel (which I noted had the graphics corruption) to a 3....

...l S-video and Composite outputs, 64 MB of memory. I installed xubuntu, and tried to use nouveau driver instead of official nvidia's. After switching driver, the boot splash xubuntu logo turned into poor coloured low-resolutioned one, but X loaded normally. Xfce worked fine, but i decided to try LXDE with SLiM login manager. So, here's bugs: 1) X server is loading normally, but when i try to switch to virtual terminal (Ctrl-Fx) my monitor shows me "Out of range" message, keyboard and mouse are switching off too and it makes me to reboot pc to get back. 2) When i trying to boo...

...python-markdown python3-markdown python3-dev xsltproc zlib1g-dev liblmdb-dev lmdb-utils libsystemd-dev 2) config line (common to the FS and DC's except for the -j option): ./configure -j8 -v --with-systemd This is a +/- standard debian installation, still (and this is probably useless info): lxde/lightdm instead of gnome; avahi, nfs, wicd disabled; network managers disabled; installed isc-dhcp-server, bind9, ntp, ethtool, iftop, iperf3, rsync, ifenslave, bridge-utils, pigz, htop, fortune, cowsay, x11vnc, openvpn I'm (remotely) keeping a close eye on the thing. I can only test stuff aft...

Hello, I'm facing issues with a Point of View GT210/218 and nouveau drivers. I'm using ubuntu server with LXDE on top of it... *lshw -c video* output: *-display description: VGA compatible controller product: GT218 [GeForce 210] vendor: NVIDIA Corporation physical id: 0 bus info: pci at 0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capab...

...omes from. The NUT default value > is 30 secs, and you do not change the value in ups.conf. > >> DD. Does wall successfully notify the users on an Ubuntu system? If you >> type >> >> echo "Hello from wall" | wall >> >> do the users of Gnome, KDE, LXDE, LightDM etc see the message? >> >> ==> Yes. I used the putty and got below 3 messages >> (Battery Power / Power Resotre / and type commands directly) >> >> >> D3. Broadcast Message from dinow-Al >> (/dev/pts/0) at 11:02 ... >> >> Hello from...

...test it, seeing as how sernet hasn't got > round to releasing 4.2 packages yet and then Peter posted that he had > got 4.2 running on jessie. I would love to know how he did this ? Oh. I am a pretty newbie on this field. Maybe that helped... First I install the basic system including LXDE. On the problem loaden notebook I messed this up by an unsuccessful attempt to install the non-free Nvidia drivers - no way to get the history of this clear. Anyway, next I install ntp, xfs utilities. Next bind9 as slave DNS pointing to my AD DCs. On the notebook I used the Debian repository,...

...omes from. The NUT default value > is 30 secs, and you do not change the value in ups.conf. > >> DD. Does wall successfully notify the users on an Ubuntu system? If you >> type >> >> echo "Hello from wall" | wall >> >> do the users of Gnome, KDE, LXDE, LightDM etc see the message? >> >> ==> Yes. I used the putty and got below 3 messages >> (Battery Power / Power Resotre / and type commands directly) >> >> >> D3. Broadcast Message from dinow-Al >> (/dev/pts/0) at 11:02 ... >> >> Hello from...

...ba shares, e.g. the home directory, using nfs. The test setup is that instead of: mount -t nfs hh1:/home2 /home2 -osec=rw,krb5 I changed to: mount -t cifs //hh1/home2 /home2 -osec=rw,sec=krb5,multiuser This works fine for console logins, but is very slow (unusable) for graphical logins to either LXDE or XFCE. The login sometimes works: Kerberos: AS-REQ steve3 at HH3.SITE from ipv4:192.168.1.41:57380 for krbtgt/HH3.SITE at HH3.SITE Kerberos: Client sent patypes: 149 Kerberos: Looking for PKINIT pa-data -- steve3 at HH3.SITE Kerberos: Looking for ENC-TS pa-data -- steve3 at HH3.SITE Kerberos: N...

...bash qemu:x:494:493:qemu user:/:/sbin/nologin tftp:x:493:492:TFTP account:/srv/tftpboot:/bin/false dnsmasq:x:492:65534:dnsmasq:/var/lib/empty:/bin/false avahi:x:491:491:User for Avahi:/run/avahi-daemon:/bin/false radvd:x:490:2:Router ADVertisement Daemon for:/var/lib/empty:/bin/false lxdm:x:489:488:LXDE Display Manager daemon:/var/lib/lxdm:/bin/false avahi-autoipd:x:488:487:User for Avahi IPv4LL:/var/lib/avahi-autoipd:/bin/false at:x:25:25:Batch jobs daemon:/var/spool/atjobs:/bin/bash nscd:x:487:486:User for nscd:/run/nscd:/sbin/nologin ntp:x:74:485:NTP daemon:/var/lib/ntp:/bin/false mysql:x:60:48...

I've got a netbook, circe 2009. When I got it, not that I was wild about ubuntu, but there was specifically an ubuntu netbook remix. Well, it's a few years later - has anyone put CentOS (6, preferably) on a netbook, and were there any problems? mark