search for: lsdahdi

...ine away from an old dms-100 and to the new ISDN switch - the tech said he couldn't see anything at the line layer, though I showed no alarms. Regardless, something odd happened that I am hoping for some advice on. We reverted to the T1 and will try again next week. The odd bit is this - lsdahdi showed all 24 channels as "T1" instead of "PRI". The output of lsdahdi at another site where I had already done this conversion (which uses a Sangoma card) looks like this: root at astsouth:/etc/dahdi# lsdahdi ### Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) ESF/B8ZS...

lspci | grep Digium 03:05.0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span T1/E1/J1 card (rev 11) dahdi_scan So I have a card in a box - lspci shows it... dahdi_scan reports nothing. Is my card dead? Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

We have a recently deployed server with a new TDM2400 card that will not put dialtone or audio on FXS ports after the physical server restarts (though they will ring if called, there's just no audio on the line if the phone at the other end picks up). The symptom can be resolved by stopping Asterisk, restarting DAHDI, and then restarting Asterisk. So far, this has happened on both times the

Hi, Built a new server at the weekend and install Asterisk 1.6.0.9 and IAX and SIP work great :) The one problem I am having is getting the OpenVox (TDM400 type card) to work. It is successfully identified using WCTDM kernel module and dahdi_scan picks it up just fine. The issue is when I try and setup dahdi_channel.conf as it fails everytime. When running asterisk -rvvvv I see the port pick

...m: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at fe5fe800 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 20020000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Kernel modules: wctdm24xxp # lsdahdi # modprobe wctdm24xxp # dahdi_genconf -v modules Default parameters from /etc/dahdi/genconf_parameters Generating /etc/dahdi/modules # cat modules # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on Fri Nov 26 12:02:11 2010 # If you edit this file and execute /usr/sbin/dahdi...

Hi. I am having problems with dahdi using kernel 2.6.32. I am using 2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv ++ dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r8670 DAHDI Version: SVN-trunk-r7445M Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 04: FXS Kewlstart

On Thu, 22 Oct 2015 15:06:59 +0300 Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote: > On Wed, Oct 21, 2015 at 01:33:27PM -0200, Ethy H. Brito wrote: > > > > Hi > > > > Who should insert dahdi_echocan_oslec.ko module in Ubuntu 14.04? > > dahdi_echocan_oslec should be built by default. What you may miss is the > 'echo.ko' (OSLEC) kernel module.

...n > > channel 1: No such device or address > > here = 0, tmp->channel = 1, channel = 1 > > [Jun 14 15:41:53] ERROR[8150]: chan_dahdi.c:14229 build_channels: Unable > to > > register channel '1-2' > > > > Suggestions ? > > What is the output of lsdahdi? > > http://docs.tzafrir.org.il/dahdi-linux/#_procfs_interface_proc_dahdi > -- > Tzafrir Cohen > icq#16849755 jabber:tzafrir.cohen at xorcom.com > +972-50-7952406 mailto:tzafrir.cohen at xorcom.com > http://www.xorcom.com iax:guest at loca...

...14 [ 72.350080] rcbfx 1: G168 DSP Ping DSP Version 106 [ 72.510185] rcbfx 1: G168 DSP Active and Servicing 2 Channels - 3 [ 72.510681] rcbfx 1: Starting DMA [ 72.530147] rcbfx 1: Spotted a Rhino: Rhino RCB8FXX (1 modules) root at pbx:/etc/dahdi# Dahdi also sees it: root at pbx:/etc/dahdi# lsdahdi ### Span 1: Rhino RCB8FXX/1 "Rhino RCB8FXX/1" (MASTER) 1 FXS FXOKS (SWEC: MG2) 2 FXS FXOKS (SWEC: MG2) 3 EMPTY 4 EMPTY 5 EMPTY 6 EMPTY 7 EMPTY 8 EMPTY root at pbx:/etc/dahdi# dahdi_cfg -vvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2....

On 2016-08-29 12:28, Eric Klein wrote: > Hi Hooman, > > What you probably want is a PRI PBX running Asterisk. > > You should either plan to build your own (with the cards you need) or get one of the low cost options: > > * Allo.com has their Mega PBX with 1 PPR port (http://allo.com/megapbx-line.html) > * Pika Tech has the Warp PBX with BRI

...sbin/dahdi_monitor ./usr/sbin/dahdi_registration ./usr/sbin/dahdi_scan +./usr/sbin/dahdi_span_assignments +./usr/sbin/dahdi_span_types ./usr/sbin/dahdi_test ./usr/sbin/dahdi_tool -./usr/sbin/fpga_load +./usr/sbin/dahdi_waitfor_span_assignments ./usr/sbin/fxotune -./usr/sbin/fxstest ./usr/sbin/lsdahdi ./usr/sbin/sethdlc ./usr/sbin/twinstar @@ -29,6 +32,15 @@ ./usr/share/ ./usr/share/dahdi/ ./usr/share/dahdi/astribank_hook +./usr/share/dahdi/dahdi_auto_assign_compat +./usr/share/dahdi/dahdi_handle_device +./usr/share/dahdi/dahdi_span_config +./usr/share/dahdi/handle_device.d/ +./usr/share/da...

................ ... [channels] #include /etc/asterisk/dahdi-channels.conf ... --------------------------------------------- root at Trixie:/etc/asterisk# dahdi_hardware pci:0000:02:01.0 wctdm+ e159:0001 Wildcard TDM400P REV I --------------------------------------- root at Trixie:~# lsdahdi ### Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) 1 FXO FXSKS (In use) (SWEC: MG2) 2 FXO FXSKS (In use) (SWEC: MG2) 3 FXS FXOKS (In use) (SWEC: MG2) 4 FXS FXOKS (In use) (SWEC: MG2) ### Span 2: DAHDI_DUMMY/1 "D...

Hello Mailinglist, we have a Xorcom Astribank which is installed at our client and working since 10/2008. Suddenly last week there where odd behaviors, no calls going through (it is used to route calls to GSM Gateways). Upon testing (reinitialization of the complete gear) it turned out that one call get's through and then nothing more. I have nothing in the logs, indicating that Asterisk

I have recently updated from Centos/*1.2 to Ubuntu Server and FreePBX 2.8.0.2. We have an Astribank with 4 T1 ports and 16 FXS ports. After updating, we had it working for a while with one NT PRI and one TE PRI and, in the process of trying to configure another PRI, I ran into a couple problems. (1) As my configuration changes didn't seem to affect the Astribank, I power-cycled it. I

Hi, I'm using Asterisk 1.6.1.18 with latest Dahdi Linux and Tools (rev 8854) and libpri 1.4.10.2. During installation, I'm facing this : # dahdi_genconf -v system Default parameters from /etc/dahdi/genconf_parameters Empty configuration -- no spans Of course, I've got span descriptions in /etc/dahdi/genconf_parameters : .... pri_termtype SPAN/1 TE SPAN/2

...pdate"): kmod-dahdi-linux-2.3.0.1-1_centos5.2.6.18_194.3.1.el5 kmod-dahdi-linux-2.2.1-1_centos5.2.6.18_164.11.1.el5 First I noted that dahdi_dummy is no longer present in kmod-dahdi-linux-2.3.0.1-1. Reverting back to kmod-dahdi-linux-2.2.1-1 solved that issue, now the module is loaded again. lsdahdi ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: Linux26) 1" (MASTER) lsmod|grep dahdi_dummy dahdi_dummy 8612 0 dahdi 194504 14 dahdi_dummy,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp Asterisk howeve...

...i) fails with: > Unit dahdi.service could not be found. > Shall I worry about this ? No. As I mentioned, that is meaningless. There are various commands that show the status at various levels: lsmod | grep ^wctdm24xxp dahdi_hardware | grep 'wctdm24xxp\+' dahdi_span_assignments list lsdahdi asterisk -rx 'pri show spans' What exactly do you consider as "status of dahdi"? > > 2. Where can Dahdi 2.11.1 Changelog file be found ? > In http://downloads.asterisk.org/pub/telephony/ ? git log #? The tarball has no changelog and thus it is not packaged. Sorry. -...

I am trying to get a zaptel install converted to dahdi. I can get dahdi installed, and the pseudo device even shows up; however, dahdi show channels shows me nothing. There is a TE122 and a TDM800 in there, and neither show up. dahdi show status shows both cards, and dahdi tools show that the cards are there, working, and have no alarms. What am I missing? Michael Munger, dCAP, MCPS, MCNPS,

Hi, I'm using a two-years old installation script for the first time on a Squeeze (linux 2.6.32) platform. For an unknown reason (might be an obvious one), Dahdi can't be loaded anymore. 1. First of all, it seems /dev/dahdi content was previously (ie in Lenny) owned by asterisk:asterisk (asterisk is run as asterisk). Now it is owned by root. Any clue about this ? 2. Secondly, I changed

Hello, I just made a asterisk / dahdi fresh install on Debian 8.4, and ended up with the following packages : $ sudo dpkg -l|grep -Ei 'dahdi|asterisk|libpri' ii asterisk 1:11.13.1~dfsg-2+b1 amd64 Open Source Private Branch Exchange (PBX) ii asterisk-config 1:11.13.1~dfsg-2 all Configuration