search for: localdomain4

...samba at lists.samba.org> wrote: > Correct you need a smb.conf. No he doesn't, he is trying to join another DC. > And please do correct your hosts file before you join. > >   > > >>  127.0.0.1   localhost localhost.localdomain localhost4 > >>localhost4.localdomain4 dc-02.example.com dc-02 << NOT GOOD > > ::1         localhost localhost.localdomain localhost6 > localhost6.localdomain6 > > 10.3.251.19                    dc-01.example.com  dc-01  << CORRECT Well it is correct if the last line is the information for the DC he is try...

...gt; >> >> > Set /etc/resolv.conf on the machine you are trying to join to: > > search solae.local > nameserver 10.0.0.22 > > Set /etc/hosts to: > > 10.0.0.25 solfs solfs.solae.local > 127.0.0.1 localhost localhost.localdomain localhost4 > localhost4.localdomain4 > ::1 localhost localhost.localdomain localhost6 > localhost6.localdomain6 > > Now try a few tests: > > ping -c1 10.0.0.25 > > ping -c1 10.0.0.22 > > ping -c1 solad > > ping -c1 solad.solae.local > > If all these tests pass, try the join again >...

...fig | grep "inet addr" inet addr:10.0.0.12 Bcast:10.0.0.255 Mask:255.255.255.0 inet addr:127.0.0.1 Mask:255.0.0.0 /etc/sysconfig/network NETWORKING=yes HOSTNAME=x800.mydomain.local GATEWAY=10.0.0.1 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 10.0.0.12 x800.mydomain.local x800 ... after a reboot: hostname x800.mydomain.local < OK hostname -f hostname: Unknown host < NOT OK dnsdomainname dnsdomainname: Unknown host < NOT...

...stuff. > I think the error may be here: /etc/hosts: multi on If that is the /etc/hosts file then something is changing it somewhere (and the kernel rpms do not touch this file unless someone wrote over it.) The file should be: 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 The second problem may be in whatever created that ifcfg-eno1 file. I have resorted and cleaned it up so it is easier to look at DEVICE=eno1 NAME=eth0 BOOTPROTO=none BROADCAST=192.168.1.255 DNS1=166.102.165.13 DNS2=207...

Hello, /etc/hosts: 127.0.0.1 nemesis nemesis.pragma.com.co localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.0.37 neptuno.pragma.com.co neptuno /etc/hosts: neptuno /etc/resolv.conf: search pragma.com.co nameserver 192.168.0.37 Best regards, Santiago. 2017-03-15 11:34 GMT-05:00, Rowland Penny via samba <samba at...

The avahi is turned off on all unix mashines. I have allready taking a look https://wiki.samba.org/index.php/Setup_Samba_as_an_AD_Domain_Member but I have this problem kinit succeeded but ads_sasl_spnego_krb5_bind failed. any idea? On 09/04/16 08:22, Lists wrote: > I am trying to setup a Samba4 as Domain Member to Samba 4 AD DC. > The OS is Centos 7 and the samba is sernet samba 4.3

...failed for name FedoraServer.xxxxx.local [Unknown error] When I put a tail on the above log, this is where it hangs until the password prompt comes up How do I fix this? Many thanks, -T # more /etc/hosts 127.0.0.1 server.storall.local localhost localhost.localdomain localhost4 loca lhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 [global] workgroup = xxxxx server string = Fedora Samba Server volume = Fedora Core, %v comment = Samba (NetBIOS) Server on FedoraServer.xxxxx.com netbios name = FedoraServer netbios aliases = PlaceJokeHere interface...

> Here's the link for the maillog: > > https://paste.fedoraproject.org/paste/kbH2N9Pc~JPuCqVpE1kszQ OK. There are a couple of things: Aug 23 21:47:18 ts130 postfix/smtpd[3750]: warning: hostname localhost does not resolve to address 127.0.0.1 Aug 23 21:47:18 ts130 postfix/smtpd[3750]: connect from unknown[127.0.0.1] That needs to be fixed. What does the entry for 127.0.0.1

...bind interfaces only = yes log level = 3 server services = smb, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbind, ntp_signd, kcc, dnsupdate, dns /etc/hosts: 192.168.0.13 ubuntu-ad ubuntu-ad.allenlan.net 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 $hostname ubuntu-ad.allenlan.net Thank you. Lee Allen

...> Rowland /etc/resolv.conf ----------------------------------------- # Generated by NetworkManager search privatedomain.com nameserver 192.168.0.251 nameserver 192.168.0.250 /etc/hosts: ----------------------------------------- 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.0.251 shp-dc2.privatedomain.com shp-dc2

>From FS1 (file server): #> cat /etc/hostname fs1.webb.local #> cat /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.5.161 fs1.webb.local fs1 #> cat /etc/resolv.conf # Generated by NetworkManager search webb.local nameserver 192.168.5.160 #> host -t A fs1 fs1.webb.local has address 192.168.5.161 #> host -t A fs1....

...> Try this. > > On your server side, add 127.0.0.1 to /etc/hosts. Mine look like > this. Get the first entry below (server.acme.local) with the > "hostname" command. > > 127.0.0.1 server.acme.local localhost localhost.localdomain > localhost4 loca > lhost4.localdomain4 > Please don't do this, '127.0.0.1' should only point to 'localhost'. If your server gets its IP via DHCP (it shouldn't) you only need: 127.0.0.1 localhost If it has a fixed IP (as it should) you need: 127.0.0.1 localhost 192.168.0.10 server.acme.tld server Where &...

...tecnologia path = /shares/c/tecnologia read only = no *[root at smb ~]# cat /etc/resolv.conf* domain ropa.intranet search ropa.intranet nameserver 192.168.1.99 nameserver 8.8.8.8 *[root at smb ~]# cat /etc/hosts* 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 smb smb.ropa.intranet *[root at smb ~]# testparm* Load smb config files from /usr/local/samba/etc/smb.conf Processing section "[netlogon]" Processing section "[sysvol]" Processing section "[tecnologia]" Loaded services file OK. Server role: ROLE_ACTIVE_DIRECTORY_DC...

I’m using a decentralized data storage application named StorjShare-CLI : https://github.com/Storj/storjshare-cli This application store data into « nodes ». StorjShare-CLI can run 1 or several « nodes » in order to store data located at different places. On a given Ubuntu machine I’m running both nodes located on this machine AND also nodes located on another machine (a Netgear ReadyNAS)

CentOS 6.4, clean install. Zimbra 8.0.3 I am behind a PfSense box using a virtual IP. So the IP of the box is 192.168.1.27 I entered this in /etc/hosts: 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.27 mail mail.meowbox.me meowbox.me but `hostname -f` says: $ hostname -f hostname: Unknown host Do I need to put the public IP for where this record resolves? Since PFSense is forwarding traffic from it to t...

...ctx.join_add_objects() File "/usr/local/samba/lib64/python2.7/site-packages/samba/join.py", line 593, in join_add_objects ctx.samdb.add(rec) This is the content of /etc/hosts [root at dc-02 ~]# cat /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 dc-02.example.com dc-02 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 10.3.251.19 dc-01.example.com dc-01 Also, I tried by enabling debug level 3 [root at dc-02 ~]# samba-tool domain join EXAMPLE.COM DC -UAdministrator --realm=EXAMPLE.COM --dns-backend=SAM...

...]: connect from > > unknown[127.0.0.1] > > > > That needs to be fixed. What does the entry for 127.0.0.1 look like in > > /etc/hosts? Have you also defined ::1 to be localhost in /etc/hosts? > > 127.0.0.1 localhost localhost.localdomain localhost4 > localhost4.localdomain4 > 192.168.1.110 ts130.palmettodomains.com ts130 > 192.168.1.110 mail.palmettodomains.com mail > > # ::1 localhost localhost.localdomain localhost6 > localhost6.localdomain6 > 192.168.1.102 edukes1.palmettodomains.com edukes1 > 192.168.1.105 hp8200.palmettodo...

...s running on the windows server. -------------------------------------------- On the samba box resolv.conf looks like this: nameserver 192.21.35.5 search testad.bio.ucl.ac.uk domain testad.bio.ucl.ac.uk etc/hosts looks like this: 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.21.35.5 testserver1 testserver1.testad.bio.ucl.ac.uk ------------------------------------------- On the windows server: Primary DNS: 192.21.35.5 Secondary DNS: 127.0.0.1 The hosts file in C:\Windows\System32\driver...

...7.0.0.1 to /etc/hosts. Mine look like > >> this. Get the first entry below (server.acme.local) with the > >> "hostname" command. > >> > >> 127.0.0.1 server.acme.local localhost localhost.localdomain > >> localhost4 loca > >> lhost4.localdomain4 > >> > > Please don't do this, '127.0.0.1' should only point to 'localhost'. > > > > If your server gets its IP via DHCP (it shouldn't) you only need: > > Yes and it is suppose to. In my instance, I am using > a fixed IP. Without the en...

Hi guys, I changed my /etc/hosts and looks like this: [root at lim-inf1-dns-02 ~]# cat /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 10.3.251.19 dc-01.example.com dc-01 172.28.240.252 dc-02.example.com dc-02 So, to be clear, dc-01.example.com is the Windows AD hostname. dc-02.example.com is the linux machine itself I tried to join domain a...