search for: libusbx

...on my personal workstation (which is also running CentOS 6 but has a whole lot of packages installed either from 3rd party repos or built by me ) since Fri 09 Jan 2015 (I needed it for heimdall ) and I had zero issues so far. > Can you be more specific about this? What hardware are you testing libusbx 1.0.19 with? Gigabyte F2A88X-D3H with AMD A8-6600K works fine with heimdall which I used to connect to a Samsung S2+ and now to a Samsung A3 (2016) . Some similar board ( I do not recall exactly what model was it, could have been either identical or DH3 which is basically the same motherboard w...

...- see below) of them is compatible with the running kernel. Everything but nut is stock CentOS 6 and fully updated. I am 100% positive that libsub0.1 which was used until yesterday ( and 1.0.9 which proved to be incompatible with nut ) are 100% compatible with the kernel. I cannot guarantee for libusbx 1.0.19 (which I used instead of 1.0.9) because I built it myself. However I am using the very same package on my personal workstation (which is also running CentOS 6 but has a whole lot of packages installed either from 3rd party repos or built by me ) since Fri 09 Jan 2015 (I needed it for...

...9, ken wrote: > > uname -r; rpm -q libusb > > CentOS 6.6 says: > [mlapier at mushroom ~]$ uname -r; rpm -q libusb > 2.6.32-504.1.3.el6.i686 > libusb-0.1.12-23.el6.i686 CentOS 5 has: libusb-0.1.12 CentOS 6 has: libusb-0.1.12 libusb1-1.0.9 CentOS 7 has: libusb-0.1.4 libusbx-1.0.15 -- rgds Stephen

...automake: bugfix: fix installation paths automake: remove unused stuff from Makefile.legacy autotools: now "make distcheck" also works. xpp: bugfix: waitfor_xpds twinstar, auto_assign_spans xpp: automake: cleanup $man_MANS handling configure.ac: add libusb/libusbx support (for xpp) xpp: add all base libxtalk files xpp: migrate everything to libxtalk xpp: xtalk -- no private status range xpp: don't use USB "clear-halt" by default xpp: strict compilation flags in oct612x/ configure.ac: xpp: now libusbx is the d...

...automake: bugfix: fix installation paths automake: remove unused stuff from Makefile.legacy autotools: now "make distcheck" also works. xpp: bugfix: waitfor_xpds twinstar, auto_assign_spans xpp: automake: cleanup $man_MANS handling configure.ac: add libusb/libusbx support (for xpp) xpp: add all base libxtalk files xpp: migrate everything to libxtalk xpp: xtalk -- no private status range xpp: don't use USB "clear-halt" by default xpp: strict compilation flags in oct612x/ configure.ac: xpp: now libusbx is the d...

...kage on my personal workstation (which is also running CentOS 6 but has a whole lot of packages installed either from 3rd party repos or built by me ) since Fri 09 Jan 2015 (I needed it for heimdall ) and I had zero issues so far. Can you be more specific about this? What hardware are you testing libusbx 1.0.19 with?

Trying to install Canon printer driver package (rpm), I get a dependency error: libusb-1.0.so.0 is needed.... The version currently installed on my 5.9 system is libusb-0.1.12-6.el5 and, AFAIK (per yum), no upgrade to that is available. So question: Do higher centos versions have libusb-1.0.so ? (We could perform a quick inventory with: uname -r; rpm -q libusb Thanks.

Does anybody have openocd-0.9.0 RPM for CentOS6 x86_64? I was able to compile F23's SRPM (along with two libraries - hidapi-0.7.0 from F19 and libusbx-1.0.14 from F19) but it gives me only "Segmentation fault". Unfortunately i'm too inexperienced to debug it by my own (gdb and strace didn't help me). -- Over And Out MoonWolf

On Tue, Dec 22, 2015 at 09:03:28PM -0700, Wes James wrote: > > > On Dec 22, 2015, at 8:06 PM, Fred Smith <fredex at fcshome.stoneham.ma.us> wrote: > > > > Attempting to install latest Calibre on Centos-7, getting: > > > > typed in "calibre ssl install error? to google > > first hit: > >

....1/PyQt-gpl-5.5.1.tar.gz tar -zxf PyQt-gpl-5.5.1.tar.gz cd PyQt-gpl-5.5.1 python configure.py --disable QtPositioning make sudo make install cd .. sudo yum install python-imaging -y sudo yum install sqlite-devel -y sudo yum install chmlib-devel -y sudo yum install podofo-devel -y sudo yum install libusbx-devel -y sudo yum install qt5-qtbase-static -y sudo yum install libudev-devel -y sudo yum install openssl-devel -y sudo yum install libicu-devel -y sudo yum install libXrender-devel -y curl -L http://code.calibre-ebook.com/dist/src | tar xvJ cd calibre-2.47.0 sudo python setup.py install then t...

...cd PyQt-gpl-5.5.1 > python configure.py --disable QtPositioning > make > sudo make install > > cd .. > > sudo yum install python-imaging -y > sudo yum install sqlite-devel -y > sudo yum install chmlib-devel -y > sudo yum install podofo-devel -y > sudo yum install libusbx-devel -y > sudo yum install qt5-qtbase-static -y > sudo yum install libudev-devel -y > sudo yum install openssl-devel -y > sudo yum install libicu-devel -y > sudo yum install libXrender-devel -y > > > curl -L http://code.calibre-ebook.com/dist/src | tar xvJ > cd calibre...

...4-418-gb1314c62.7.4.1/drivers/libusb1.c:289: > more undefined references to `libusb_strerror' follow I did some more digging. It turns out that the version of libusb 1.0 ( 1.0.9 ) included by RH in RHEL 6 misses the libusr_strerror function completely. I bypassed that by building against libusbx ( oldish but good enough, I think -- 1.0.19). Unfortunately there not much gain as the usbhid driver still cannot access that f*ing interface: [root at belgrade ~]# usbhid-ups -DDDD -u root -x explore -x vendorid="0463" -a eaton Network UPS Tools - Generic HID driver 0.42 (v2.7.4-418-...

On 06/19/2017 05:33 PM, Charles Lepple wrote: > On Jun 19, 2017, at 4:27 AM, Manuel Wolfshant wrote: >> 1.014501 [D2] Unable to get HID descriptor (Pipe error) >> 1.014511 [D3] HID descriptor length (method 1) -1 > So at this point in the logs, the kernel USB HID driver is detached from the UPS HID interface (until the UPS USB cable is unplugged and reattached). If

On Jun 16, 2017, at 6:12 AM, Manuel Wolfshant <wolfy at nobugconsulting.ro> wrote: > > running autogen.sh was triggered automatically. but even if I do it explicitly, I still get: > + autoreconf -i > configure.ac:887: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body

@jimklimov: Looking at the code that uses hid_rep_index, hid_desc_index, and hid_ep_in|out in usb_subdriver (all in nut_libusb.h) I don't see any use of the addvars mechanism. If I follow the examples that set and use those struct members, it looks like everything relies on them being initialized to 0 by default, then only set in subdrivers or situations that need something different. If I