search for: len

...k. I don't now what to do now, can any one give me a clue of what is happening? The correct prefix is 00 to do international dialling in Spain with E1? -- Attempting call on Zap/g1/00353166940000 for s@test2:1 (Retry 1) -- Making new call for cr 37378 > Protocol Discriminator: Q.931 (8) len=40 > Call Ref: len= 2 (reference 4610/0x1202) (Originator) > Message type: SETUP (5) > Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) >...

...ones uses RFC 2833 and the trace looks pretty the same. Also the rtp debug log looks fine (see below). What could be the reason? thanks klaus trace: I have entered 1234#, but voicemail received as secret just 123. Got RTP packet from 83.136.33.3:64118 (type 00, seq 042765, ts 4066332168, len 000160) Got RTP packet from 83.136.33.3:64118 (type 00, seq 042766, ts 4066332328, len 000160) Got RTP packet from 83.136.33.3:64118 (type 00, seq 042770, ts 4066332968, len 000160) Got RTP packet from 83.136.33.3:64118 (type 00, seq 042771, ts 4066333128, len 000160) Got RTP packet...

...time(NULL) = 1399964809 time(NULL) = 1399964809 time(NULL) = 1399964809 time(NULL) = 1399964809 fcntl(12, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=32544, len=1}) = 0 fcntl(12, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=32544, len=1}) = 0 fcntl(12, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=32544, len=1}) = 0 fcntl(12, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=32544, len=1}) = 0 time(NULL)...

...ot connect with firewall enabled. Same error mesage as before "Cannot mount location ...". ufw log set to medium and copied below. Feb 4 10:00:42 radio kernel: [ 354.238099] [UFW AUDIT] IN=enp2s5 OUT= MAC=ff:ff:ff:ff:ff:ff:74:27:ea:ab:1e:e0:08:00 SRC=192.168.254.15 DST=192.168.254.255 LEN=203 TOS=0x00 PREC=0x00 TTL=128 ID=7217 PROTO=UDP SPT=138 DPT=138 LEN=183 Feb 4 10:00:42 radio kernel: [ 354.238501] [UFW AUDIT] IN= OUT=enp2s5 SRC=192.168.254.39 DST=192.168.254.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=57421 DF PROTO=UDP SPT=137 DPT=137 LEN=58 Feb 4 10:01:25 radio kernel: [ 397....

...\0rT\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 2092}], > 1) = 2092 > gettimeofday({1419854003, 222035}, NULL) = 0 > gettimeofday({1419854003, 222103}, NULL) = 0 > gettimeofday({1419854003, 222169}, NULL) = 0 > fcntl(16, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=176, len=1}) = 0 > fcntl(16, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=176, len=1}) = 0 > gettimeofday({1419854003, 222345}, NULL) = 0 > gettimeofday({1419854003, 222482}, NULL) = 0 > gettimeofday({1419854003, 222868}, NULL) = 0 > fcntl(13, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, star...

...bridge is already sufficient. The Prefetchable > Base Upper 32 Bits register is at offset 0x28. > > In a trace where the Nvidia device is disabled/enabled via Device > Manager, I see writes on the enable path: > > 2571 at 1535108904.593107:rp_write_config (ioh3420, @0x28, 0x0, len=0x4) Did you do anything special to get an emulated bridge included in this setup? Folllowing the instructions at https://wiki.archlinux.org/index.php/PCI_passthrough_via_OVMF I can successfully pass through devices to windows running under virt-manager. In the nvidia GPU case I haven't got p...

...;> 2092}], >>> 1) = 2092 >>> gettimeofday({1419854003, 222035}, NULL) = 0 >>> gettimeofday({1419854003, 222103}, NULL) = 0 >>> gettimeofday({1419854003, 222169}, NULL) = 0 >>> fcntl(16, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=176, >>> len=1}) = 0 >>> fcntl(16, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=176, >>> len=1}) = 0 >>> gettimeofday({1419854003, 222345}, NULL) = 0 >>> gettimeofday({1419854003, 222482}, NULL) = 0 >>> gettimeofday({1419854003, 222868}, NULL) = 0 >>> fcn...

Hi, I'm having problems in a second domain controller machine. Every time a restart samba, few time after a samba process starts using almost 100% cpu. It's a Centos 6.5 x86_64 with the following: sernet-samba-libsmbclient0-4.1.6-7.el6.x86_64 sernet-samba-ad-4.1.6-7.el6.x86_64 sernet-build-key-1.1-4.noarch sernet-samba-libs-4.1.6-7.el6.x86_64 sernet-samba-client-4.1.6-7.el6.x86_64

..., [{"\34\0\0\0\0\0\0\0rT\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 2092}], 1) = 2092 gettimeofday({1419854003, 222035}, NULL) = 0 gettimeofday({1419854003, 222103}, NULL) = 0 gettimeofday({1419854003, 222169}, NULL) = 0 fcntl(16, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=176, len=1}) = 0 fcntl(16, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=176, len=1}) = 0 gettimeofday({1419854003, 222345}, NULL) = 0 gettimeofday({1419854003, 222482}, NULL) = 0 gettimeofday({1419854003, 222868}, NULL) = 0 fcntl(13, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=14324, len=1}) = 0 fcnt...

...s used for fax, everything sounds fine... I found the following when using capi debug: ISDN1#02: too much voice to send for NCCI=0x10101 Google finds nothing relevant for this error message :-( Has anybody any idea ? Christoph P.S.: Here is the output of capi debug CONNECT_IND ID=002 #0x016e LEN=0037 Controller/PLCI/NCCI = 0x101 CIPValue = 0x10 CalledPartyNumber = <c1>XXX CallingPartyNumber = <00 a3> CalledPartySubaddress = default CallingPartySubaddress = default BC...

...\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 2092}], >> 1) = 2092 >> gettimeofday({1419854003, 222035}, NULL) = 0 >> gettimeofday({1419854003, 222103}, NULL) = 0 >> gettimeofday({1419854003, 222169}, NULL) = 0 >> fcntl(16, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=176, len=1}) = 0 >> fcntl(16, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=176, len=1}) = 0 >> gettimeofday({1419854003, 222345}, NULL) = 0 >> gettimeofday({1419854003, 222482}, NULL) = 0 >> gettimeofday({1419854003, 222868}, NULL) = 0 >> fcntl(13, F_SETLKW, {type=F_RDLCK, w...

...t;> 1) = 2092 >>>> gettimeofday({1419854003, 222035}, NULL) = 0 >>>> gettimeofday({1419854003, 222103}, NULL) = 0 >>>> gettimeofday({1419854003, 222169}, NULL) = 0 >>>> fcntl(16, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=176, >>>> len=1}) = 0 >>>> fcntl(16, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=176, >>>> len=1}) = 0 >>>> gettimeofday({1419854003, 222345}, NULL) = 0 >>>> gettimeofday({1419854003, 222482}, NULL) = 0 >>>> gettimeofday({1419854003, 222868}, NULL)...

Just spoke to Jerry, we'll be doing a 3.0.27a on Monday to fix a regression that broke smbfs mounts from Linux. Sorry for the problem. Jeremy.

...: new low speed USB device number 6 using ohci_hcd usb 2-3: New USB device found, idVendor=0764, idProduct=0501 usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0 usb 2-3: Product: CP550HG usb 2-3: Manufacturer: CPS usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 128 rq 6 len 255 ret -110 usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 128 rq 6 len 255 ret -62 usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 129 rq 6 len 9 ret -6 2 usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 129 rq 6 len 376 ret -62 usb 2-3: usbfs: USBDEVFS_CONTRO...

...the effort. I've attached the 'configure' output for the two systems in case a likely culprit is obvious from the differences. Compiling with 'gcc' 4.7.1. Problem was first noticed in Samba 3.6.4 with AIO disabled. Turned on AIO when compiling 3.6.10. Thank you for the excellent Samba software! Regards -------------- next part -------------- SAMBA VERSION: 3.6.10 - - # define SAMBA_VERSION_STRING SAMBA_VERSION_OFFICIAL_STRING checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu...

Hi, I?ve strange problem when I?m making a call from SIP (Cisco 7960) to capi (Fritz PCI). When I call a national number, I?m hearing the ringtone when the called party is ringing but when I call an international number, I don?t hear the ringtone and I?ve a silence until the called party answers. Both call are going through the same extension. Here?s 2 log files, one with a national number and one with an international. National : ---------------------------------------------------------------------------- -------------------------------------------------...

I've looked at how to speed up the transpose function in R (ie, t(X)). The existing code does the work with loops like the following: for (i = 0; i < len; i++) REAL(r)[i] = REAL(a)[(i / ncol) + (i % ncol) * nrow]; It seems a bit optimistic to expect a compiler to produce good code from this. I've re-written these loops as follows: for (i = 0, j = 0; i<len; i += 1, j += nrow) { if (j>=len) j -= (len-1);...

...ex da9e1fe..6be3cd7 100644 --- a/include/linux/virtio_vsock.h +++ b/include/linux/virtio_vsock.h @@ -13,6 +13,8 @@ #define VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE (1024 * 4) #define VIRTIO_VSOCK_MAX_BUF_SIZE 0xFFFFFFFFUL #define VIRTIO_VSOCK_MAX_PKT_BUF_SIZE (1024 * 64) +/* virtio_vsock_pkt + max_pkt_len(default MAX_PKT_BUF_SIZE) */ +#define VIRTIO_VSOCK_MAX_MRG_BUF_NUM ((VIRTIO_VSOCK_MAX_PKT_BUF_SIZE / PAGE_SIZE) + 1) /* Virtio-vsock feature */ #define VIRTIO_VSOCK_F_MRG_RXBUF 0 /* Host can merge receive buffers. */ @@ -48,6 +50,11 @@ struct virtio_vsock_sock { struct list_head rx_queue; };...

...ex da9e1fe..6be3cd7 100644 --- a/include/linux/virtio_vsock.h +++ b/include/linux/virtio_vsock.h @@ -13,6 +13,8 @@ #define VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE (1024 * 4) #define VIRTIO_VSOCK_MAX_BUF_SIZE 0xFFFFFFFFUL #define VIRTIO_VSOCK_MAX_PKT_BUF_SIZE (1024 * 64) +/* virtio_vsock_pkt + max_pkt_len(default MAX_PKT_BUF_SIZE) */ +#define VIRTIO_VSOCK_MAX_MRG_BUF_NUM ((VIRTIO_VSOCK_MAX_PKT_BUF_SIZE / PAGE_SIZE) + 1) /* Virtio-vsock feature */ #define VIRTIO_VSOCK_F_MRG_RXBUF 0 /* Host can merge receive buffers. */ @@ -48,6 +50,11 @@ struct virtio_vsock_sock { struct list_head rx_queue; };...

Hi All; I am facing a problem that always the users confused and connect the telephone line coming from the telephone service provider to the FXS port and cause it to be damaged, specially if the card was 2 fxs and 2 fxo, so they make mistake and connect the line to fxs while it should be connected to fxo. What is the solution for this disaster? Regards Bilal