search for: leith

A final note: http://lists.alioth.debian.org/pipermail/nut-upsuser/2014-April/008977.html That message talks about the Eaton Nova AVR which on the Eaton 5E product page it says the 5E replaces the Nova. Do they perhaps share hardware/firmware? Thanks, Leith Bade leith at leithalweapon.geek.nz On 10 August 2014 10:16, Charles Lepple <clepple at gmail.com> wrote: > On Jul 26, 2014, at 9:58 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > >> First the beeper is annoying and loud and I worry it will wake everyone up at ni...

...off for long enough for the PSU/computer to register this as a AC off and on event. When the UPS reboots it beeps and I can hear a relay click so it must do something when it reboots with power on. How can I add a delay between UPS power off, and power on? Here is output of upsc in case it helps: leith at server:~$ upsc eaton Init SSL without certificate database battery.charge: 35 battery.runtime: 1076 battery.type: PbAc device.mfr: EATON device.model: 5E 650i device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto drive...

On Jul 26, 2014, at 9:58 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can mute the beeper temporarily (and this works) but that most UPSs do not allow you to permanently turn it off (I tried using upsrw but it s...

On 10 August 2014 09:05, Charles Lepple <clepple at gmail.com> wrote: > On Aug 7, 2014, at 7:57 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > > Error -32 is EPIPE, which means that the PC didn't see a reply from the device during the descriptor read. I don't know that we have ever successfully run one of these issues to ground. > Considering Eaton do officially suppor...

On Aug 7, 2014, at 7:57 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > I have tried to plug it into every USB port (including the USB 3.0 > ones) and I still get these errors. I discovered that power cycling > the UPS will fix it for a while, and also unplugging and replugging > the USB cable will also...

Hi, I recently purchased a new Easton 5E UPS. I plugged the USB cable into my computer so I could use the NUT UPS tools. However every so often NUT fails to connect to the device after a boot. Looking at dmesg I see errors like this: [ 3.277075] usb 1-9: new low-speed USB device number 6 using xhci_hcd [ 3.302091] usb 1-9: device descriptor read/8, error -32 [ 3.430241] usb 1-9: device

...vice > 0.023546 Device matches > 0.024498 Unable to get HID descriptor (error sending control message: > Broken pipe) > 0.024518 HID descriptor length 549 > 0.024861 Unable to get Report descriptor: Broken pipe Hi Shane, Going through old list posts, and I noticed the similarity to Leith's email: http://lists.alioth.debian.org/pipermail/nut-upsuser/2014-August/009128.html The "Broken pipe" error message might also show up in dmesg output as "error -32". What kind of motherboard do you have, and what version of the kernel are you running?

...uid gid pid machine ---------------------------------------------- dar3338$ npb ports 4109 beldon (192.9.202.168) Fri Aug 16 12:30:21 2002 der3339$ rbe hm 3828 ettrick (192.9.202.246) Fri Aug 16 09:02:23 2002 ddr3325$ hai rpu 3997 leith (192.9.202.150) Fri Aug 16 11:58:58 2002 IPC$ nobody nobody 3828 ettrick (192.9.202.246) Fri Aug 16 10:26:36 2002 djr3328$ rma hm 3849 glespin (192.9.202.14) Fri Aug 16 10:01:06 2002 ddr3330$ ngf ports 3058 cargen (192.9.202.85) Thu Aug 15 14:3...

Hi, Wondering whether anyone has managed to get NUT working with the Eaton 5E Essential UPS, or has any tips as to what I might try to get it working, or whether I'm just out of luck? My config is: OS name and version: Kubuntu 14.04 exact NUT version: 2.7.1-1ubuntu1 NUT installation method: sudo apt-get install nut exact device name: 5E2000iUSB-AU ups.conf entry: [Eaton5E2000] driver =