Displaying 20 results from an estimated 146 matches for "lcs".
Did you mean:
cs
2003 Dec 22
2
Sipura 2000 configuration.
...re line 1 with only
one small problem. But I can't get the line 2 working with asterisk.
Here are samples of my sip.conf and extensions.conf. If I disable line
1 I can then get line 2 working. Is there a sample configuration for
the Sipura to get both ports working with Asterisk.
Sip.conf
[lcs-sipura1]
context=main
username=lcs-sipura1
secret=XXXX
host=dynamic
canreinvite=no
nat=1
disallow=all
allow=ulaw
allow=alaw
;
[lcs-sipura2]
context=main
username=lcs-sipura2
secret=XXXX
host=dynamic
canreinvite=no
nat=1
disallow=all
allow=ulaw
allow=alaw
Extensions.conf
exten => 203,1,Dial(SIP...
2011 May 08
3
Unable to REGISTER to the Asterisk v1.8.3.3 server via SIP/TLS
...ess: 0004132F08DC
IP-Address: 192.168.101.102
Firmware-Version: snom300-SIP 8.4.31
Firmware-URL: http://provisioning.....4.31-SIP-f.bin
Production Information: Mac:0004132F08DC;Version:Standard;Hardware:snom300
(H: R2A);Date:15/05/08;Copyright? snom technology AG
Uptime: 0 days, 1 hours, 27 minutes
LCS: 0 days, 0 hours, 53 minutes (0)
Memfree: 772 K
CPU: 0.04 0.02 0.03 1/10 96
Bootloader-Version: 1.1.3-u
SIP Identity Status:
Identity 1 Status: 361 at pbx.domain.com: Network Failure
- - -
[ Status > SIP Trace ]
Sent to tls:11.22.33.44:5061 at 24/12/2001 08:00:32:192 (729 bytes):
REGISTER si...
2012 Feb 04
8
Potential memory leak in sshd [detected by melton]
Hi all,
After the memory leaks (bug 1967
<https://bugzilla.mindrot.org/show_bug.cgi?id=1967>) I reported in
bugzilla are fixed,
I also applied melton(http://lcs.ios.ac.cn/~xuzb/melton.html)
to detect the potential bugs in sshd (openssh-5.9p1).
The url below is the index of bug reports that are checked as real
bugs manually.
http://lcs.ios.ac.cn/~xuzb/bugsfound/memleak/openssh-5.9p1/realbugs/sshd/index.html
Shall we fix these bugs? Or just let them go...
2006 Feb 19
0
Live Communication Server and Asterisk
Has anyone have interfaced this successfully? I came to know from M$ that
Genesys GETS can be used to interface asterisk. I have interfaced Cisco
call manager to asterisk/ser but for my final setup I would like to have a
LCS talking to a CCM, without having the Genesys GETS is I don't have to.
Has anyone been playing around with this? If so I would really like to hear
some advise.
Regards,
Dinesh Birlasekaran
Network Engineer,
ComIT, Institute of Molecular and Cell Biology
61 Biopolis Drive, Singapore 13...
2007 Jun 06
5
TCP<->UDP SIP proxy?
Hello,
One of our faculties have Microsoft's LCS and would like to connect it to
our Asterisk system. the problem is that Asterisk talks SIP over UDP while LCS
talks SIP over TCP with TLS. Anyone can recommend a gateway between these two
protocols?
Thanks! __Yehavi:
2005 Aug 15
1
Re: [Asterisk-Dev] MS Live Communications Server
Search google with "sip pstn site:www.microsoft.com"
You will find out how to configure LCS static routing to SIP Gateway,
like Asterisk
but you need patch Asterisk to support TCP.
http://bugs.digium.com/view.php?id=4903
Step1: configure LCS 2005 to let sip uri: *@pstngw.domain to route to
next hop: pstngw ip address
Step2: patch your asterisk chan_sip.c to support TCP
Step3: configure y...
2005 Aug 11
1
MS Live Communication Server
Hi List!
does anyone played around with the LCS and Asterisk? Because the LCS is
doing no RFC compliant SIP, i wonder if it can work. Google couldn't
tell me. If someon heared about that, please let me know.
The fact i figured out is that the Border Controler from Jasomi can be
used as a gateway from MS-LCS-SIP to regular SIP. But that i...
2011 Dec 30
7
[Bug 1967] New: Potential memory leak
...Platform: All
OS/Version: All
Status: NEW
Severity: normal
Priority: P2
Component: ssh
AssignedTo: unassigned-bugs at mindrot.org
ReportedBy: zhenbo1987 at gmail.com
I applied a memory leak detection tool, called
melton(http://lcs.ios.ac.cn/~xuzb/melton.html), to detect the potential
bugs in openssh-5.9p1.
The url below is the index of bug reports that are checked as real bugs
manually.
http://lcs.ios.ac.cn/~xuzb/bugsfound/memleak/openssh-5.9p1/realbugs/index.html
Does it provide enough info to report bugs .
Do I need to ad...
2004 Jul 04
0
LCS multiparty conferencing commercial opportunity
...Anyway, great product for presence and chat etc and 2 way voice chat but
it doesn't allow multi party voice conferencing. To do this you have to
use 2 external parties.
Radvision - hardware solution minimum cost $20k
Intratel - $500 a seat but only up to 8 people per conference.
As MS LCS is sip based surely it wouldn't be that hard for someone here
to work on the LCS api's to offer an asterisk solution for conference
rooms and multiparty voice? There would be a pretty large market out
there for a low cost option and it has a life span of at least 2 years
because MS wont be...
2005 Jun 02
0
Connecting Asterisk with Microsoft LCS (Live Communication Server)
Hello,
im trying to connect LCS to asterisk which will act as pstn gateway for LCS.
Microsoft system supports only SIP TCP connections but asterisk UDP.
im was searching about conversion beetwen TCP and UDP and i found that SER
can do that but i don't know SER and my trying to configure SER fails.
is there any other pos...
2006 Sep 11
0
[Serusers] MS LCS 2005 / SER / Asterisk Integration
Hi to all,
I read
http://www.voip-info.org/wiki/view/MS+LCS+2005+%252F+SER+%252F+Asterisk+Integration
Is it possible to use ser as a presence server instead
of LCS 2005 ?
Harry
___________________________________________________________________________
D?couvrez un nouveau moyen de poser toutes vos questions quelque soit le sujet !
Yahoo! Q...
2009 Apr 24
2
Thanks for the lenny-cran AMD64 ports
...s for the lenny-cran AMD64
ports.
I have a question about r-recommended from lenny-cran which I just
installed:
hotelling:~$ apt-cache policy r-recommended
r-recommended:
Installed: 2.9.0-1~lennycran.0
Candidate: 2.9.0-1~lennycran.0
Version table:
2.9.0-1 0
600 http://debian.lcs.mit.edu unstable/main Packages
*** 2.9.0-1~lennycran.0 0
625 http://cran.fhcrc.org lenny-cran/ Packages
100 /var/lib/dpkg/status
2.8.1-2~lennycran.0 0
625 http://cran.fhcrc.org lenny-cran/ Packages
2.7.1-1+lenny1 0
750 http://debian.lcs.mit.edu lenny/main...
2006 Dec 06
5
LVM & volume groups
Can anybody tell me if it makes a difference if domU''s have separate LVM
volume groups?
For instance, the Xen User Manual
( http://tx.downloads.xensource.com/downloads/docs/user/#SECTION03330000000000000000) says, when setting up a domU''s disks with LVM, to do a
vgcreate vg /dev/sda10
Should each domU have it''s own volume group, or can all the domU''s share
2005 Jun 22
1
Fwd:protocol TCP/UDP question
can you help me to configure lcs2005 with asterisk...
I use SER to resolve the problem that there is for communication protocol...LCS uses tcp, Asterik UDP.
Someone, knows how to do the configuration beetwen LCS and SER , SER and Asterisk? the function of asterisk is SIP-PSTN Gateway for the LCS PC-phone communication??
or th...
2008 May 05
4
microsoft office communicator 2005
Hi! im trying tu run "microsoft office communicator 2005" and i cant
resolve this:
fixme:ntdll:NtConnectPort (0x1434f8,L"\\RPC
Control\\epmapper",0x33ecd0,(nil),(nil),(nil),0x33ecf8,0x33ece0),stub!
i google it all nigh long and i just cant find the way!!!.
I need to connect to LCS 2005 because my company switch from Jabber to LCS.
I tried pidgin and miranda-im+sip but didnt work
Does anyone knows?
[Software\\Wine\\AppDefaults\\communicator.exe] 1209953966
"Version"="winxp"
[Software\\Wine\\AppDefaults\\communicator.exe\\Direct3D] 1209861528
"PixelS...
2007 Mar 18
3
how can I use rsync between 2 accounts?
Hi,
I have 2 linux accounts on different machines (same login, same password).
Can you please tell me how I use rsync directories between 2 accounts?
Thank you.
2009 Jun 13
2
Polycom registration errors
...progressinband=never
callerid="HFT Booth 0 <(619) 364-4850>"
allowsubscribe=yes
And some of the Polycom phone config:
reg reg.1.displayName="HFT0"
reg.1.address="6193644850"
reg.1.label="4850"
reg.1.type="private"
reg.1.lcs=""
reg.1.csta=""
reg.1.thirdPartyName=""
reg.1.auth.userId="hft0"
reg.1.auth.password="mysecret"
reg.1.auth.optimizedInFailover=""
reg.1.musicOnHold.uri=""
reg.1.server.1.address="jtsd05"...
2014 Sep 08
3
problema con los cambios de marcas temporales en el eje X
...bar, axes=F, type="b", pch=19, ylim=c(400,650), xlab="", ylab="xbar")
axis(1,at=1:length(datIn$xbar), labels=xlabels,cex.lab=0.5, las=2)
axis(2)
box()
datIn$xorig <- 1:dim(datIn)[1]
arrows(
x0=datIn$xorig, y0=datIn$lci
,x1=datIn$xorig, y1=datIn$lcs,
,angle=90, code=3, length=0.1
)
mtext("Fechas", side=1, line=1, outer=T)
#---------------------------
<Rplot.png>
Saludos,
Carlos Ortega
www.qualityexcellence.es
El 8 de septiembre de 2014, 10:57, Carlos Fernández-Delgado <ba1fedec en uco.es> escribió:
M...
2000 Apr 04
0
Obscure bug....?
...add.histogram <- function(h1, h2)
{
print(c(test=0,lbs1=length(h1$breaks),lbs2=length(h2$breaks)))
if(length(h1$breaks) >= length(h2$breaks))
{
bl <- h1$breaks
bs <- h2$breaks
cl <- h1$counts
cs <- h2$counts
mi <- h1$mids
print(c(test=1,lbs=length(bs),lcs=length(cs),lbl=length(bl),lcl=length(cl)))
} else {
bs <- h1$breaks
bl <- h2$breaks
cs <- h1$counts
cl <- h2$counts
mi <- h2$mids
print(c(test=2,lbs=length(bs),lcs=length(cs),lbl=length(bl),lcl=length(cl)))
}
ind <- sub.vector(bs, bl)
if(! is.vector(in...
2007 Mar 29
4
Off Topic: Open Source USB Softphone
I need a softphone - for usb phone devices - that I can alter (insert logo,
menu, etc).
Does somebody know such one?
[]s
--
Abra?os
Luis Claudio
Mobile + 55 21 9215 2888
Mobile +55 15 9141 8402
Office +55 15 2102 5859
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070329/b8593cb1/attachment.htm