search for: lcp_failur

...face. I do not want that, as I have load balancing configured and default route is removed when ppp0 interface disapears. This is my ifcfg-ppp0 config : USERCTL=yes BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=yes PIDFILE=/var/run/pppoe-adsl.pid FIREWALL=NONE PING=. PPPOE_TIMEOUT=80 LCP_FAILURE=3 LCP_INTERVAL=20 CLAMPMSS=1412 CONNECT_POLL=6 CONNECT_TIMEOUT=60 DEFROUTE=no SYNCHRONOUS=no ETH=eth0 PROVIDER=DSLppp0 USER=O2 PEERDNS=no DEMAND=no PERSIST=yes As you can see, I have PERSIST=yes , which according to documentation should keep ppp0 interface ON. Well it does but only for a couple o...

...v4 address. Shorewall is doing the forwarding and the static routes on the internal interface for IPv4 are working. But no IPv6. Here is my ifcfg-ppp0: USERCTL=no BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=no PIDFILE=/var/run/pppoe-adsl.pid FIREWALL=NONE PING=. PPPOE_TIMEOUT=80 LCP_FAILURE=3 LCP_INTERVAL=20 CLAMPMSS=1412 CONNECT_POLL=6 CONNECT_TIMEOUT=60 DEFROUTE=yes SYNCHRONOUS=no ETH=eth0 PROVIDER=DSLppp0 USER='me' PEERDNS=no DEMAND=no PERSIST=no IPV6INIT=yes Interesting also about the FIREWALL entry. I do have iptables off, as I am using shorewall that uses netfilter....

Hi all I get a Cisco 1841 router, connecting the office through a CHAP PPPoE link: [...] interface Dialer1 ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip tcp adjust-mss 1452 dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname username at isp ppp chap password 0 s0meStr0ngP4sswd [...] As

I just bought a new cheap compaq presario sr5010nx and so far have been unable to get my dsl up and running on Centos5. pppoeconf on Ubuntu works just fine -- same machine -- same harddrive. I've run adsl-setup and system-config-network? (separately) numerous times without success. So far I suspect a missing driver but suppose it could also be a detection issue. Suggestions or workarounds

...with pppoe-setup I've generated /etc/sysconfig/network-scripts/ifcfg-ppp0 cat /etc/sysconfig/network-scripts/ifcfg-ppp0 # generated with pppoe-setup USERCTL=yes BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=yes PIDFILE=/var/run/pppoe-adsl.pid FIREWALL=NONE PING=. PPPOE_TIMEOUT=80 LCP_FAILURE=3 LCP_INTERVAL=20 CLAMPMSS=1412 CONNECT_POLL=6 CONNECT_TIMEOUT=60 DEFROUTE=yes SYNCHRONOUS=no ETH=eth0.7 PROVIDER=DSLppp0 USER=feste-ip/<benutzerkennung>@t-online-com.de PEERDNS=no DEMAND=no /etc/ppp/chap-secret an /etc/ppp/pap_secret hast follewing content: # Secrets for authentication us...