search for: lan2

Hello Samba experts, Please read all email because i'm desperate!!!!! I have problem on joining to LAN-s using Samba. Finally i got a solution to "see" booth workgroups on "Entire Network", but i'm having problem with stations located in LAN2. From any station located in LAN1, I can see LAN2 workgroup and the browse list with stations located in LAN2, but when i'm tring to access and station in it, i get connection refused. I want to mention that acces by IP address is working (eg: \\192.168.1.72)!!! It seems to be a probelm rel...

Hello to everyone, Here is the situation: [LAN1]---[eth3]/----------\ | LinuxBR |[eth2]---[LAN0]---[linuxGW]---[internet] [LAN2]---[eth4]\----------/ Whole LAN is in subnet 10.0.0.0/24. So I need: LAN0, LAN1, LAN2 could not see each other. LAN0, LAN1, LAN2 is in same subnet (10.0.0.0/24). All LANs have to get only internet. How can I configure LinuxBR to do so? Do I have to do only bridge? Or only vlan? Or both...

...selected incoming connection from trusted sources, and the second LAN port I am trying to setup using masq NAT as it only requires outgoing connections, no incoming. the static NAT stuff I have working fine, but the problem is with the masq stuff... I can see from the logs, that from a machine on LAN2, if I try and access say www.cisco.com <http://www.cisco.com/> then the firewall allows the connection out, but the site is never brought up in the browser and there is no internet connectivity from LAN2 I have included that status.txt file as requested, anyone with any helpful advice it wou...

Hello, I have a problem with the following setup, I hope you can help me. I have two internet gateways, one for LAN1 and the second for LAN2. +--------------+ GW1 more eth0| |eth4(SNAT) GW2 ---...routers...-----+ router +----------------- | | +---+------+---+ eth1| eth2| | |...

An very interesting test did yesterday that, LAN1 and LAN2 setup an tinc VPN which is quite simple(the physical link between tinc nodes are quite stable/fast), and no any application traffic to go through the tinc. Later, I setup smokeping which LAN1 initial 20 ping to LAN2 on a per-minute basis, but as you saw from the below picture, it had packet drop....

I have the following situation: A Linux 2.4.22 server: Physical ethernet: lan1 - Ethernet port (Internet) lan2 - Ethernet port (Cisco Switch, Trunk port) Tunnel: tap1 - OpenVPN in tcp-server mode VLAN's: lan2.201 lan2.202 lan2.203 tap1.201 tap1.202 tap1.203 Bridges: br201 (lan2.201, tap1.201) br202 (lan2.202, tap1.202) br203 (lan2.203, tap1.203) On the other end, the same type of server: Physical e...

Hi I set-up a gre tunnel between two linux boxes. A short diagram is like this lan1 -> router1 ----- router2 <- lan2 The tunnel works fine, i can ping from lan1 to lan2 but the problem is the speed between lan1 and lan2 is lower than it supposed to be If i log in to router1 and transfer something from router2 or lan2 it is working at maximum speed, 1024kbits/s. The problem is if i log in to a computer in lan1 an...

...e you the actual ip) eth1 (DMZ Zone) - 192.168.100.254/255.255.255.0 eth2 (LAN1) - 192.168.101.254/255.255.255.0 Now, everyone in LAN1 has access to internet. (due to SNAT rule) Now, I want to install another ethernet card to this firewall. then, it would be eth3. eth3 will be as follows. eth3 (LAN2) - 192.168.102.254/255.255.255.0 Now, I want put about 5 people (5 PCs) behind this LAN2 and give internet access to them. But, I do not want them to use my whole bandwidth (i.e - 256 kbit/s), But Instead, I want peple behind this LAN2 to allocate 64 kbits/s(kilo bits per second) for their intern...

Dear Friends, I have been using shorewall for some years. I want to set up "shorewall 2" router behind firewall, accordind to this picture: I have lost at setuping "zone"-s (wifi, lan1, net). Plese help me ! Thanks, psw net | | SHOREWALL 1 ------- lan 1 | | |wifi | | SHOREWALL 2 ------- lan 2 | ---------------- lan 3

...tal 3 different lans, 2 dmz, and 4 internet connections, my default FORWARD policy is DROP, here is a simplified example of my config with only two lan segments and internet connection: Allow forwarding between lans -A FORWARD -s lan1/mask -j ACCEPT -A FORWARD -d lan1/mask -j ACCEPT -A FORWARD -s lan2/mask -j ACCEPT -A FORWARD -d lan2/mask -j ACCEPT Are some of those redundant? Then I want to nat anything that is not to one of the local subnets (i.e. is going to internet), but the only way I can find to do that is to setup rules to avoid natting between subnets: -t nat -A POSTROUTING -s lan1/...

Hi, list members. I''ve been reading a lot about traffic control because at work we have the following configuration...... LINUX BOX _____ 100 mbit | | LAN1--------------|eth0 | | | 2 mbit SDSL | eth1|-------------------INTERNET 100 mbit | | LAN2--------------|eth2 | | | ------- The linux box (REDHAT 9-2.4.20-30.9) acts as a firewall-NAT solution for both internal networks. Also the linux acts as SMTP gateway (or redirector) for two different domains handled by mail servers on each internal LAN. SQUID is on the linux too and serves L...

Following link is the question: http://tndo.no-ip.com/~wilson/separate.gif The cisco route already set static route from lan2 to shorewall, how can I set Shorewall route to lan2? Thank. _______________________________________ YM - 離線訊息 就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任何說話都冇走失。 http://messenger.yahoo.com.hk

 Hello, everybody.  This one''s got me stumped.  What I''m trying to do is have two networks--192.168.1.0 and 192.168.2.0--with SMB and WINS running between them.  So far I can mount SMB shares allright, but I can''t browse by WINS names across the router.  I''ve posted this question on Linuxquestions.org; you''ll find the details there.  Here are my

...----------- I have to bridge the 2 lans in the left side of the diagram with my linux box running as a bridge. I have to tag the traffic of each lan so I created the 2 vlans interfaces on eth0 (tag 1 and tag 2). All works fine. But now I have to priorize LAN1 traffic so it leaves the bridge before LAN2. Also I need to shape the traffic to the 1 Mbps link. I read about the "prio" qdisc but it honours the TOS field of the IP packets, and I don''t want to unless it was really necessary. I read about the "prio" option of the htb qdisc and made some scripts, but they don...

Hi all I have a problem splitting traffic behind 2 adsl. My situation: _________router2 | lan1 ------- fw ----------- router1 | lan2----------| lan1 use router1, lan2 router2. The linux default gw is set to router2, lan2 browse internet without any problem (icmp, tcp..). Lan1 is blocked. >From lan1 i can ping router1, and i''ve set this iproute rules: ip route add 10.0.0.0/24 dev dmz0 table cnet ip route add 195....

Hello, I have 2 ISP uplinks (zones: inet1 and inet2), each with a fixed IP on the outside and a routed subnet (/25 and /26) on the inside. So, behind the firewall i have 2 networksegments (lan1 and lan2) with public IP-addresses. The segments are completely isolated from eachother: hosts in zone "lan1" connect only to "inet1" and hosts in zone "lan2" only connect to "inet2". Because the segements don''t have to switch ISP, loadbalancing is not us...

...at is loaded along the > way. A major problem with my system. I'm sorry for perhaps asking something entirely obvious, but have you tried: kernel-dir $ rsync -avr tools/testing/selftests/ root@$board:selftests/ board $ cd selftests/drivers/net/dsa/ board $ ./bridge_locked_port.sh lan0 lan1 lan2 lan3 ? This is how I always run them, and it worked fine with both Debian (where it's easy to add missing packages to the rootfs) or with a more embedded-oriented Buildroot.

...AN_2 machines through the VPN. For example, NASs get synchronized throught the VPN. ------------------------- | | | | VPN | | | | ------------------------- Geographical site 2 ------------------------- - AD DC: Samba 4.8.0 - LAN_2 IPs: 192.168.2.0/24 - Machines DNS names: <hostname>.company.lan2 - Some machines do not move from this site. - Some machines are nomads (they can move to Geographical site 1). - We can access some resources that are on LAN_1 machines through the VPN. For example, NASs get synchronized throught the VPN. ------------------------- On Geographical site 2, I am ab...

I would like to route ssh in my network via DSL2 and all other trafic via DSL1. So far I menaged to do it for LAN2 but there are still WLAN1,LAN3 and LAN1 to go. On all routers I added table "pilicka" with rule for fwmark and I fwmarked ssh. # ip rule show 0: from all lookup local 32765: from all fwmark 0x3 lookup pilicka 32766: from all lookup main 32767: from all lookup default # iptables...

Hi, I'm using linux 2.6.21.5 and our kernel is freeze. The problem is, if I create a Software bridge using $brctl command. and add two interfaces say, eth0.0 and eth0.1 using $brctl addbr br-lan $brctl addif br-lan eth0.0 $brctl addif br-lan eth0.1 and when i send traffic from a host connected to one port to host connected at other end, soon all the memory is dried up and and kernel