search for: lacp_rate

...n wheezy *** /etc/network/interfaces auto bond0 iface bond0 inet manual slaves eth0 eth1 bond-mode 0 auto br0 iface br0 inet static address 100.x.x.x netmask 255.255.255.0 network 100.x.x.0 broadcast 100.x.x.255 gateway 100.x.x.19 bridge_ports bond0 bond-miimon 100 bond-lacp_rate 1 bond-downdelay 200 bond-updelay 200 address 0.0.0.0 netmask 0.0.0.0 *** *** /etc/sysctl.conf #kernel.printk = 3 4 1 3 #net.ipv4.conf.default.rp_filter=1 #net.ipv4.conf.all.rp_filter=1 #net.ipv4.tcp_syncookies=1 net.ipv4.ip_forward=1 #net.ipv4.conf.br0...

...3 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-em4 TYPE=Ethernet NAME=em4 UUID=53517fa5-9e22-4286-a367-8c91ef6f1883 DEVICE=em4 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-bond0: DEVICE=bond0 NAME=bond0 TYPE=bond BONDING_MASTER=yes ONBOOT=yes BONDING_OPTS="mode=802.3ad miimon=10 lacp_rate=1" USERCTL=no Bond0 is up, the switch & server are happy all 4 links are live, no errors I created a new bridge: ifcfg-br0: DEVICE=br1 TYPE=BRIDGE ONBOOT=yes NAME=br1 I created a VLAN interface on bond0 and attached it to the bridge ifcfg-bond0.77: DEVICE=bond0.77 BOOTPROTO=none O...

Hi, I have been playing this weekend with bonding on PCI netcards and found that all of netcards I have, but old 3com, do not support MII. So bonding is not going to happen with them. Do you have some pci netcards supporting MII successfully running on bonging? Thanks, David Hrb??

...work-scripts# cat ifcfg-bond0 DEVICE=bond0 TYPE=Ethernet BONDING_MASTER=yes BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no # IP IPADDR=172.16.1.128 PREFIX=16 GATEWAY=172.16.0.254 # Bonding BONDING_OPTS="mode=802.3ad ad_select=stable use_carrier=1 miimon=100 arp_ip_target=172.16.1.128 updelay=100 lacp_rate=fast" USERCTL=no After a ? systemctl restart network ?: :/etc/sysconfig/network-scripts# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo v...