search for: l8i

On Wed, Jul 9, 2008 at 1:12 PM, Tim <tim at tcsac.net> wrote: > Perfect. Which means good ol'' supermicro would come through :) WOHOO! > > AOC-USAS-L8i > > http://www.supermicro.com/products/accessories/addon/AOC-USAS-L8i.cfm Is this card new? I''m not finding it at the usual places like Newegg, etc. It looks like the LSI SAS3081E-R, but probably at 1/2 the cost. -B -- Brandon High bhigh at freaks.com "The good is the enemy...

Hi all, Sorry for the offtopic question. I hope though that others on this list or reading the archive find the answers useful too. It seems the Adaptec 1405 4port SAS HBA I bought only works with RHEL and SuSE through a closed source driver, and thus is quite useless :-( I was stupid enought to think "Works with RHEL and SuSE" meant "Certified for RHEL and SuSE, but driver in

According to various posts the LSI SAS3081E-R seems to work well with OpenSolaris. But I''ve got pretty chilled-out from my recent problems with Areca-1680''s. Could anyone please confirm that the LSI SAS3081E-R works well ? Is hotplug supported ? Anything else I should know before buying one of these cards ? Thanks, Arnaud

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wed, 2018-07-04 at 16:06 -0400, me at tdiehl.org wrote: > Hi, > > Where can I find the srpm for centos-release-6-10.el6.centos.12.3.x86_64? > > I looked in vault and it is not there. > > Regards, > Hi, The 6.10 folder is in place, but we need to give the team chance to upload. I would assume it will appear in coming

...pany and I have advocated for Solaris and ZFS. But now we are having trouble to find any good SATA controller for 12+ disks, there are Areca cards, but they seems very flaky (24 port support, but hangs with more than 12 in JBOD mode, hangs on disk failures etc). The AOC-SAT2-MV8,AOC-USAS-L8i have been mentioned, but it had problems with device numbering and/or as I understood it no support for hot plugging. Isn''t there any supported PCI.* SATA card with at least 12 ports that do work and have a real driver supporting hot plugging/cfgadm- operations? The HCL does not...

I just wanted to share this useful info as I haven''t seen it anywhere. My scrounging-genius colleague, Lawrence, found standard PCI-e replacement brackets for the justifiably popular Supermicro AOC-USAS-L8i cards. They cost a few bucks each, fit perfectly and allow us to use these cards extensively without any case-hackery. http://www.mouser.com/ProductDetail/Keystone-Electronics/9203/?qs=sGAEpiMZZMsQtlBhqKq43bjBhDwhG44Z There are also brackets for the low-profile cards available, but I''...

...8 port with a marvel chipset. There have been several mentions of LSI based controllers on the mailing lists and I''m wondering about them. One obvious difference is that the Marvel contoller is PCI-X and the LSI controllers are PCI-E. Supermicro have several LSI controllers. AOC-USASLP-L8i with the LSI 1068E and AOC-USASLP-H8iR with the LSI 1078. Are they stable? How does is the performance compare to the Marvel? Does hot swap cause problems? The LSI1068E has 16MB SRAM onboard cache - I expect this helps performances, but does it causes issues with ZIL? The LSI1078 has 512MB DDR...

Hi, Where can I find the srpm for centos-release-6-10.el6.centos.12.3.x86_64? I looked in vault and it is not there. Regards, -- Tom me at tdiehl.org

...idz2 volume to anywhere else. I have no idea what that''s about, but the drives will drop to 0 every couple of seconds, and repeat. My system is as follows: 10 WD20EARS (bad idea? I only found out after I bought them.) in raidz2 config 32GB SSD for root drive for OS install Supermicro USAS-L8i HBA card (1068E chipset I believe?) 6GB RAM 500 watt power supply AMD Athlon II X2 260 CPU Here''s my zpool: pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c2t0d0s0 ONLINE 0 0 0 er...

My current home fileserver (running Open Solaris 111b and ZFS) has an ASUS M2N-SLI DELUXE motherboard. This has 6 SATA connections, which are currently all in use (mirrored pair of 80GB for system zfs pool, two mirrors of 400GB both in my data pool). I''ve got two more hot-swap drive bays. And I''m getting up towards 90% full on the data pool. So, it''s time to expand,

Anyone know of a SATA and/or SAS HBA with battery backed write cache? Seems like using a full-blown RAID controller and exporting each individual drive back to ZFS as a single LUN is a waste of power and $$$. Looking for any thoughts or ideas. Thanks. -Matt -- This message posted from opensolaris.org

I have a 5-500GB disk Raid-Z pool that has been producing checksum errors right after upgrading SXCE to build 121. They seem to be randomly occurring on all 5 disks, so it doesn''t look like a disk failure situation. Repeatingly running a scrub on the pools randomly repairs between 20 and a few hundred checksum errors. Since I hadn''t physically touched the machine, it seems a

Which consumer-priced 1.5TB drives do people currently recommend? I had zero read/write/checksum errors so far in 2 years with my trusty old Western Digital WD7500AAKS drives, but now I want to upgrade to a new set of drives that are big, reliable and cheap. As of Jan 2010 it seems the price sweet spot is the 1.5TB drives. As I had a lot of success with Western Digital drives I thought I would

...zZ+ySc{@wT48DTfvr;NSzgM5T$`_mi#035<FLbbzT5>#F9PW64b`Yb=ox?siOZ8+<p zC2p6%*c=mXUKL%W8gF^)&dsCByF>Bfw^~eI6SalpPZyE7;Tx|bgDmnT5>kB*I#vZp z2Yycr{V$e1VKPfppA9g*!VS2}?zZk&n|*k*u{21Lm3W>?sW;XbPVF8X*K3zUY;;tS zuoQ*bP at xk00YVZ7Z5>6IZ%{l)R at tA&Jlq9auMpHtqvSi1r)Rx~1=AQ4Y$ql8i~-|H z{y}=>VlVEGK<<>Tyb=<-^fZm0n6Fmd01DsWNY3AdrxI{D($WkN7FIBPxzJNl<Sh-A z5 at jb|#bbJ3ED<9las0r0S%)8Yv*ik8BegdZ{32$L0v4yOC}LevQ0WLc1<2$9^kN?a zul}eZCl)XEUCDm8k`@2JsjS|sh{>`+5R+s9<1q=~>J7o1FQWwsgMiM^M84O=AV27a z^3>@}IZp}$>ysWfaC?ni8pp0sGfy?g=d9Ty53SxbtSf3Dp+<...