search for: keepsettings

...evsel, latency 32 I/O ports at fc00 [size=16] Capabilities: [b0] Power Management version 2 Which I think is the VIA part. when I do "hdparm /dev/hdc" I get /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 15733/16/63, sectors = 15858864, start = 0 when I do "hdparm -d1 /dev/dhc" I get /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) I get operation not per...

...arm -Tt /dev/hdd /dev/hdd: Timing buffer-cache reads: 128 MB in 0.95 seconds =134.74 MB/sec Timing buffered disk reads: 64 MB in 2.43 seconds = 26.34 MB/sec /sbin/hdparm /dev/hdd /dev/hdd: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 3684/240/63, sectors = 55704096, start = 0 /etc/samba/smb.conf socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192 I'm running Redhat 8.0 using a custom built 2.4.20 kernel. The d...

...I/O ports at 3418 [size=4] I/O ports at 30f0 [size=16] I/O ports at 30e0 [size=16] Capabilities: [70] Power Management version 3 # hdparm /dev/hda /dev/hda: multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 24792/255/63, sectors = 203928109056, start = 0 # hdparm /dev/sda /dev/sda: HDIO_GET_MULTCOUNT failed: Inappropriate ioctl for device IO_support = 0 (default 16-bit) readonly = 0 (off) readahead = 256 (on) geometr...

...this (seriuos) problem happened tuesday and thursday (today) this week. The settings we have now in our harddisks is using udma2 with the following settings as show with hdparm: dev/hda: multcount = 16 (on) IO_support = 3 (32-bit w/sync) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 4865/255/63, sectors = 78165360, start = 0 Does anybody have any suggestions or any idea in what could be the problem or how to fix it? Do exist any experience in problems with digium hardware and asterisk when using lin...

...2, the ls command responds almost immediately. Is there some setting that can be tuned to avoid such a behaviour? I'm currently running RedHat 7.2, kernel 2.4.9-21 hdparm /dev/hda: /dev/hda: multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 2343/240/63, sectors = 35433216, start = 0 And from dmesg: hda: IBM-DARA-218000, ATA DISK drive hda: 35433216 sectors (18142 MB) w/418KiB Cache, CHS=2343/240/63, UDMA(33) Thanks for any help, D...

...de. Performance on the server is extremely bad when large amounts of disk activity is taking place. I think the problem is that my drive is not in DMA mode: # hdparm /dev/hda /dev/hda: multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 16383/255/63, sectors = 80026361856, start = 0 ...but I can't set it on: # hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) ...which...

...al modem on /dev/ttyS1. PS/2 mouse. /dev/hda=2.5 Gig Maxtor 82560A4 drive(windoze 95) /dev/hdb=6.4 Gig Fujitsu MPC 3064AT Drive Unused usb ports. [root@genius /root]# hdparm /dev/hdb /dev/hdb: multcount = 2 (on) I/O support = 1 (32-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 784/255/63, sectors = 12594960, start = 0 I have 2 large partitions on /dev/hdb for linux which are now ext3. Before the conversion, and still with a 2.4.3 kernel (not ext3 capable) hdparm -tT r...

...mword1 mword2 IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4 UDMA modes: mode0 mode1 mode2 mode3 mode4 *mode5 mode6 [ct_sys@installed TEST]# hdparm /dev/hda /dev/hda: multcount = 16 (on) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 9964/255/63, sectors = 160086528, start = 0 Kernel 2.4.20 & 21 both output same disk settings. Glen

...you need anymore information let me know.. The CPU is a PIII866 with 512MB RAM. $ uname -a Linux dev-01 2.4.19-pre10-ac2 #3 Sun Jun 30 18:56:04 EDT 2002 i686 unknown $ hdparm /dev/hda /dev/hda: multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 busstate = 1 (on) $ cat /proc/mounts /dev/hda1 / ext3 rw,noatime 0 0 /dev/hda2 /home ext3 rw,noatime 0 0 /dev/hda3 /usr ext3 rw,noatime 0 0 $ df -h...

> > On Wed, Jun 3, 2009 at 8:52 AM, David McGuffey > <davidmcguffey at verizon.net> wrote: > > This is my first post here on the CentOS forums.? I've been running > Fedora > > since FC4, and have been working with RHEL 4 at work.? But this is > my first > > foray into CentOS. > > > > I followed the multimedia guidance on the wiki, and now

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

.../dev/hda: Timing buffer-cache reads: 128 MB in 0.49 seconds =261.22 MB/sec Timing buffered disk reads: 64 MB in 3.12 seconds = 20.51 MB/sec [root@arsozah root]# hdparm -iv /dev/hda /dev/hda: multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 2495/255/63, sectors = 40088160, start = 0 Model=IBM-DPTA-372050, FwRev=P76OA30A, SerialNo=JMYJMFJ4664 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0,...

Hello Folks, We have 2 (identical hardware) busy public 2U rack servers, both have several hundred users & peak email (for example) deliveries at 300/5min during the daytime. Both servers run RAID1 over 2 EIDE disk drives. One server is fine - it never has problems - it is running RH7.3 and CPU loads are normal. The other server has constant disk activity & kjournald at CPU load of