search for: kdegraaf

...e: Debian Etch, Samba 3.0.24 NetBIOS: SPACETIME Address: 192.168.1.2 Netmask: 255.255.255.0 Gateway: none Software: Windows XP Professional NetBIOS: ICE-LT021 Address: 192.168.1.50 Netmask: 255.255.255.0 Gateway: none DNS: 192.168.1.2 WINS: 192.168.1.2 Here are my config files and logs: http://kdegraaf.net/samba-wtf/smb.conf http://kdegraaf.net/samba-wtf/slapd.conf http://kdegraaf.net/samba-wtf/log.smbd http://kdegraaf.net/samba-wtf/log.nmbd http://kdegraaf.net/samba-wtf/log.192.168.1.50 http://kdegraaf.net/samba-wtf/log.ice-lt021 The server is running dnscache on 192.168.1.2 and...

This is concerning an Asterisk 1.4.18 server. We have approximately 70 DID numbers. Incoming calls are placed into the "incoming" context (by zapata.conf) and are routed based on the dialed number. I want to do some manipulation (CallerID name override) to all incoming calls before they are routed. I would prefer to avoid duplicating the necessary code in each DID extension stanza,

I need to monitor the states of my T1/PRI Zap channels. Specifically, I need to be able to programmatically determine whether a channel is unused, carrying an inbound call, or carrying an outbound call. Using the manager interface, I can easily tell whether a Zap channel is used or not by looking at the results of: Action: Command Command: zap show channel <x> Or: Action:

...n, Oct 13, 2008 at 4:55 PM, Steve Totaro < stotaro at totarotechnologies.com> wrote: > > > On Mon, Oct 13, 2008 at 5:53 PM, Steve Totaro < > stotaro at totarotechnologies.com> wrote: > >> >> >> On Mon, Oct 13, 2008 at 5:22 PM, Kevin DeGraaf <kevin at kdegraaf.net>wrote: >> >>> I need to monitor the states of my T1/PRI Zap channels. Specifically, I >>> need to be able to programmatically determine whether a channel is >>> unused, carrying an inbound call, or carrying an outbound call. >>> >>> Using t...

Greetings, I have a Tripp-Lite SU6000RT4U unit connected via USB and RS-232. # tripplitesu -DD -u root -a tl6000 Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 # tripplite -DD -u root -a tl6000 Failed to find UPS - giving up... # newhidups -DD -u root -a tl6000 Checking device (09AE/4002) (001/003) - VendorID: 09ae - ProductID: 4002 - Manufacturer: Tripp Lite - Product: TRIPP

Hello, We''ve been using Xen on several servers with direct-attached storage for a number of years. Now we''re looking to buy more Xen servers and re-purpose two of the older ones as SANs to hold the domU filesystems, in order to achieve redundancy and live migration ability. I''m looking for comments on our proposed design. SAN 1 - existing server w/ 4 GB, 2x

I'm going to be deploying around 30 IP phones with Asterisk in the near future. I've tentatively settled on the Linksys/Sipura SPA9xx family. I am unclear on the notion of "lines" in the context of SIP phones like these. The SPA942 model has a 2-line-to-4-line upgrade available, but I don't know why I'd need to purchase it. I have tested a SPA942 with Asterisk, and

Hello, I'm trying to decide between the foneBRIDGE2 ($1135) and foneBRIDGE2-EC ($1610). Has anyone here directly compared the two? Would we really suffer without the onboard echo cancellation? The manufacturer's site doesn't really give much helpful information about choosing one over the other. Thanks. -- Kevin DeGraaf

Hello, If anyone is using a TE121B card and it works reliably (i.e. no "HDLC Bad FCS" or similar errors), could you pass along the make, model, and basic configuration of your Asterisk server? We tried upgrading our old Dell PowerEdge server to a SuperMicro system, but that didn't help. I would like a solid recommendation before I suggest another purchase. Thanks. -- Kevin

Greetings, I am writing an AGI script that needs to check on the idle/busy status of a number of SIP peers (mostly SPA9xx phones, with a few Polycoms and Snoms thrown in for fun). Is it possible to call Asterisk functions (e.g. SIPPEER) from AGI scripts? Based on my Googling, I would guess in the negative. I have tried various permutations of Set() and Eval() without success. I have also

I am trying to configure a Polycom IP4000 for use with Asterisk 1.4.5 on a flat local network. I followed the provisioning guides that I found on the Web, and I have the phone downloading bootrom.ld, sip.ld, and a bunch of configuration files. This all works properly. However, I receive the following error: NOTICE[27345]: chan_sip.c:14725 handle_request_register: Registration from

I have a new APC Back-UPS XS 1200. It is detected properly by the Linux kernel (2.6.16): # dmesg usb 5-3.4: new low speed USB device using ehci_hcd and address 9 usb 5-3.4: new device found, idVendor=051d, idProduct=0002 usb 5-3.4: new device strings: Mfr=3, Product=1, SerialNumber=2 usb 5-3.4: Product: Back-UPS XS 1200 FW:8.g1 .D USB FW:g1 usb 5-3.4: Manufacturer: American Power Conversion usb

I''m using Xen 3.1.0 on Debian etch, kernel 2.6.18-4-xen-amd64. One of the guests runs Windows XP. I am trying to install an application (Autodesk Inventor) that spans two DVDs. The config file for the domain in question contains: disk = [ ''phy:/dev/volgrp0/halebopp,ioemu:hda,w'', '',hdc:cdrom,r'' ] I ran "xm block-list halebopp --long" and

Hello all, My apologies if this is a FAQ; I was not able to find the answer in any existing documentation. Furthermore, I know it''s not germane to Xen itself, but I''m hoping that someone else''s knowledge can save me a little bit of time. :-) In order to run Windows (XP, 2003, etc.) as a hardware-virtualized guest of Xen, is it necessary to purchase a retail-boxed