search for: k8we

I tried updating the BIOS on my K8WE (S2895) yesterday to 1.03, but after the update, FreeBSD (RELENG_6 dated March 26) would randomly freeze after booting. As I was updating from v1.01, I suspect it may be the updates to the nVidia SATA firmware that caused the issue, as things generally froze shortly after the background fsck proce...

...2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache baracuda ata 7200 drives lite on dual layer lightscribe 16x dvd+rw/rw x48 drive 4 port Sata Raid controller raid - 10 2 gigabit E broadcom 10/100/100 GBE lan controller Tyan Thunder K8WE (S2895) motherboard or Tyan motherboards with ServerWorks BCM5785 Chipset (or similar from Tyan only) All your comments will be appreciated. Thanks in advance. -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic...

Good day. Thanks in advance for any help. I have a Tyan S2895 (Thunder K8WE) with 2 275 Opterons and the latest (1.02) bios. It appears to have an nVidia nForce SATA chipset which connects to a 250gb WD Caviar SATA drive. Using the CentOS 4 update 2 x86_64 DVD, the install is peachy until half-way through the "performing post install configuration" bit. Then it...

...ly want to go back to an even older pxelinux.0 :( Also, this problem is seen only when booting up the SLES distro's. If I have RHEL 4/5 on these machines, the networking starts up fine on these OSes. Please tell me if any specific machine details are required. The motherboard is a TYAN TIGER K8WE $> lspci 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev b1) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Co...

...a machine dropped in my lap that I am trying to get CentOS 4.1 to run on as a first pass (the hope is for it to eventually run Rocks -- http://www.rocksclusters.org , which uses CentOS 4.x as its underlying OS). The machine has 2 Opteron 250DP (2.4GHz) with 4 GB of RAM. It is using a Tyan Thunder K8WE (S2895A2NRF) motherboard with an nVidia nForce chipset -- http://www.tyan.com/products/html/thunderk8we.html. It is configured to boot from an SATA drive (80GB) and then use 3Ware 8506-8 card with 8x250GB SATA drives in a big raid 5 as a data store. So, CentOS appears to recognize the nics and fin...

Anyone have any experience with these products yet? We've got one in for eval, but I thought I'd also ask for experiences here... Thanks in advance. Dave Thompson The University of Wisconsin - Madison Computer Sciences Department

...rs, however, I cannot seem to find that for Suse 10.3. Is it something included in another package? Is it something that is now obsolete? CAN ANYONE HELP ME DEBUG THIS? I am running R version 2.6.1 (2007-11-26) on Suse Linux 10.3 64-bit x86_64 on a Boxx Technologies computer with a TYAN Thunder K8WE S2895 Motherboard with 4Gb Ram and 2 dual CPUs (total of 4 CPUs). The CPUs are AMD Opteron. Hard Disk Usage is 4 150 Gb SATA drives array with a Com3 9550SX Controller set at RAID 5. The full error message received from Rkward upon the package installation attempt was: ==========================...

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

...alf Of Chris Teesdale Sent: 15 February 2006 12:19 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Zaptel problem on 4 Processor Opteron SMP system Hi All, I've just put together a system comprising of the following; Hardware 2 x AMD Opteron 270 Processors (Dual Core) Tyan K8WE Mobo 2GB Kingston PC3200 Registered RAM 2 x WD Raptor 10000rpm 74Gb Digium TE210p Software Mandriva 2006 Public Release (Kernel 2.6.12-12mdksmp) Asterisk 1.2.4 Zaptel 1.2.3 Problem Zaptel compiles and installs to the right place after modifiing /usr/src/linux2.6.12-12/Makefile "EXTR...

Hello all, I compiled the kernel with the xen patch and I seam to have trouble with some kernel modules, like ATI''s proprietary driver. The system seams considerably slower than before, this might be because of the video drivers, or maybe the RAM alocated to dom0 (512Mb instead of it''s usual 1Gb). When I try to run xend, it dies with a SIG 15. I attached the log file. Anyone

...2bit glibc glibc-32-bit glibc-devel glibc-devel-32bit glibc-html glibc-i18ndata glibc-info glibc-locale glibc-locale-32bit glibc-obsolete glibc-profile glibc-profile-32bit I am running R version 2.6.1 (2007-11-26) on Suse Linux 10.3 64-bit x86_64 on a Boxx Technologies computer with a TYAN Thunder K8WE S2895 Motherboard with 4Gb Ram and 2 dual CPUs (total of 4 CPUs). The CPUs are AMD Opteron. Hard Disk Usage is 4 150 Gb SATA drives array with a Com3 9550SX Controller set at RAID 5. Initially I tried installation through Rkward, but also tried from the R command prompt as well. Rkward provides...