search for: jmicron

hi does centos support jmicron? what should i pass to the kernel to make this work? thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070529/d1991acc/attachment.html>

...is cat /proc/partitions | grep sd 8 0 1953514584 sda 8 16 1953514584 sdb 8 32 1953514584 sdc But the devices are non-functional. eg:- smartctl -a /dev/sda Smartctl open device: /dev/sda failed: No such device and fdisk /dev/sda Unable to open /dev/sda So I reckon the JMicron JMB361 controller [02:00.0 SATA controller: JMicron Technology Corp. JMB361 AHCI/IDE (rev 02)] is not something that Centos 5 is very keen on. Its loaded the ahci module for it uname says Linux filestore 2.6.18-411.el5 #1 SMP Mon Jul 11 18:16:41 CDT 2016 i686 i686 i386 GNU/Linux This thread...

...Family 11h Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 08:00.0 System peripheral: JMicron Technologies, Inc. Unknown device 2382 08:00.2 SD Host controller: JMicron Technologies, Inc. Unknown device 2381 08:00.3 System peripheral: JMicron Technologies, Inc. Unknown device 2383 08:00.4 System peripheral: JMicron Technologies, Inc. Unknown device 2384 09:00.0 Ethernet controller: Atheros...

I have a Asus laptop, from the new generation, and my network driver is present in the kernel since version 2.6.32(Jmicron). Is there any CentOS with this kernel? I tried to compile myself, but I failed. Is a bit harder than I thought. Is there any testing version of CentOS or some backports? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/c...

Hello All, I have a machine that crashed. Some part of the motherboard (power supply-related) went south. The motherboard, CPU and memory have been replaced with a much newer architecture. The OS and data are intact on two SATA drives that were RAID1 with LVM. I am going to use 'linux rescue' to recover the LVM backup so I can mount the RAIDs (there were two) in a new CentOS

Hi, I am having some difficulties installing centos 5.3 on the gigabyte GA-MA790FX-UD5P motherboard. Has anyone got centos booting on this motherboard? so far I have tried the following. + disabled the jmicron controller as this caused errors on booting JMB363 bad irq(0): will probe later error (this error caused the installation to stop at this point) + tested all components in another computer, they all work. + remove all unnecessary components from the pci bus. + power supply is not an issue...

...idge: Intel Corporation C204 Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) 01:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW...

...h VT-d. I compiled Xen-unstable (3.3) from Mercurial on CentOS 5.2, but compiled my own kernel-xen from the latest CentOS SRPM. (Made sure pciback was built-in and not a module, as the stock kernel-xen has it as a module.) I''m probably going to write a how-to soon, so stay tuned! I have a JMicron SATA/PATA PCI Express controller with a DQ35JO motherboard and a Q6600 processor. My grub entry: title CentOS (2.6.18-92.el5.xenpcibackxen) root (hd0,0) kernel /xen-3.3.0-rc4-pre.gz vtd=1 iommu=1 module /vmlinuz-2.6.18-92.el5.xenpcibackxen ro root=/dev/VolGroup00/LogVol00...

...h VT-d. I compiled Xen-unstable (3.3) from Mercurial on CentOS 5.2, but compiled my own kernel-xen from the latest CentOS SRPM. (Made sure pciback was built-in and not a module, as the stock kernel-xen has it as a module.) I''m probably going to write a how-to soon, so stay tuned! I have a JMicron SATA/PATA PCI Express controller with a DQ35JO motherboard and a Q6600 processor. My grub entry: title CentOS (2.6.18-92.el5.xenpcibackxen) root (hd0,0) kernel /xen-3.3.0-rc4-pre.gz vtd=1 iommu=1 module /vmlinuz-2.6.18-92.el5.xenpcibackxen ro root=/dev/VolGroup00/LogVol00...

...Corporation 82801JD/DO (ICH10 Family) SMBus Controller \-1f.5 Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller When having the SATA/PATA controller card plugged in I get almost the same output but with these additional entries: [...] +-1c.0-0000:01-- +-1c.3-0000:02--+-00.0 JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller | \-00.1 JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [...] Therefore I decided to pass-through everything that appeared additionally after the mount of the controller card: xe vm-param-set other-con...

...(Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my swap! Particulars: mobo=Gigabyte P35-DS3R SATA Controller=AHCI PATA Controller=JMicron 20360 new drive=ATA WDC WD1600AAJS-2 old drive=WDC WD400JB-00JJA0 DVD-RW=Pioneer DVR-112D (PATA) NICs=eth0=Realtek RTL-8029(AS) (DHCP) eth1=Realtek RTL-8029(AS) (Static) Has anyone seen this? Will 5.2 help with this situation? Been working on this for days! Thanks, Dick -- "The...

I have a nice new 965 chipset mobo with core 2 duo cpu. I was wondering if anyone has any experiences with this chipset and CPU with 4.4 ? Does the jmicron sata/pata interface work ? Are both cores recongnized with the right kernel ? Does EIST work ? Or should I wait for Centos 5 ? Cheers, Brian.

...Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor Function 5 01:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) 02:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) 02:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) 03:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) 03:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (...

Which command to run which will auto detect all hardwares present in the system ? OS : CentOS Running Asterisk -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/5e064cf8/attachment.htm

I'm having trouble getting a Centos installation to boot on a system with hdd's hanging off an AHCI hba. Long ago, I posted about only seeing four of the six sata ports on my asus server board. According to research I've done since then (I now need the ports!), the solution is to enable the AHCI bios, which turns on NCQ and the last two ports. The already installed system does not

...freeze, can't use network and when I type a command in shell occur a I/O error. I already test memory, and the problem are in two similars machines. I see in CentOS foruns someone with the same problem using the sata_via driver but without an answer. I'm running Centos 5, in BIOS disable Jmicron raid, and the sata is in IDE mode. Thanks all.

...anyone can suggest other ways to approach this? Normally it is idle for about 23H, 57M per day, as it only runs a short backup session at 00:30, using rsnapshot which doesn't take very long at all. cat /proc/scsi/scsi reports: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: JMicron H/W RAID Rev: 0958 Type: Direct-Access ANSI SCSI revision: 05 dmesg reports: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sdc1 sd 6:0:0:0: [sdc] Attached SCSI disk ... EXT4-fs (sdc1): mounted filesystem with ordered data...

Hey there.. I was wondering if anyone could share experiences they have had with the Intel ICH10R SATA controller? I tried looking around but all I could find were RAID references, I have no interest in using the RAID functionality just basic SATA JBOD. Wondering if there are any gotchas for performance, drivers, quality etc. I normally don't touch anything that is not hardware RAID though

...ICH10 Family) SMBus Controller 03:00.0 VGA compatible controller: ATI Technologies Inc RV730XT [Radeon HD 4670] 03:00.1 Audio device: ATI Technologies Inc RV710/730 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) 05:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 05:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) 08:02.0 FireWire (IEEE 1394): VIA...

...lients , at the moment i?m using tftp but as we all know performance is bad. I have 3 different hardware systems. Model 1: msi itx board with realtek card with serial port Model 2: shuttle barebone with intel atom and realtek card, just usb ports Model 3: shuttle barebone with intel atom and jmicron card, just usb ports I tried pxelinux 6.01 and also 6.02. No luck on Model 2 and 3. Model 1 is booting with 6.02 and 6.01 via lpxelinux.0 without a problem. I used the stock binarys from the tar.bz , no make was issued. I use this dhcpd.conf entry host tc10143 { hardware ethernet...