search for: istrip

...erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke another query i had was on hiding arguments passed to ssh. I ha...

...\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel -iutf8 -opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 -isig -icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $ sudo cat /dev/ttyS0 $GPGLL,0000.00000,N,00000.00000,W,1706...

Hi, on my system (Linux 2.6.18.8 - ia64), if a domain write on the xencons before xenconsole is initialized the domain gets back what it wrote. This patch fixes this issue by making raw the pty slave very early. (I suppose it doesn''t happen with linux as a guest because it takes a little bit of time before writing to xencons). Tristan. _______________________________________________

I setup a ssh chroot jail following this[1] guide. It works for my user to login, use ls and use scp which is all I really want. I do have a problem I cannot solve: when connected and navigating the filesystem, the backspace key actually moves the cursor forward and does not delete what I type. I may have found a hint from some googling that readline will read in /etc/inputrc on login but if

...^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; parenb parodd cs7 hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk inpck istrip -inlcr -igncr icrnl ixon ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon -iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt -echoctl echoke According to APC, the baud rate should be 2400. If I set it...

...nplug/plug, and run solis right after. The problem still persists. [~]>stty -a -f /dev/cuaU0 speed 9600 baud; 0 rows; 0 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef&gt...

When running R from the terminal on Linux (Ubuntu 16.04), it core dumps whenever / wherever I press Ctrl-4 or Ctrl-\. You get thrown back to the terminal with "Quit (core dump)" being the only message. Grepping the R source code, it doesn't look like that message is generated by R itself. Over on Twitter, it has been confirmed to also happen on macOS. $ R -d valgrind --vanilla

...t.c_ispeed = dev->speed; t.c_ospeed = dev->speed; t.c_lflag &= ~(ICANON | ISIG | IEXTEN | ECHO | ECHOE | ECHOK | ECHOKE | ECHONL | ECHOCTL | ECHOPRT | ALTWERASE | NOFLSH | TOSTOP | FLUSHO | PENDIN | NOKERNINFO | EXTPROC); t.c_iflag &= ~(ISTRIP | ICRNL | INLCR | IGNCR | IXON | IXOFF | IXANY | IMAXBEL | IGNBRK | BRKINT | INPCK | IGNPAR | PARM RK); t.c_oflag &= ~(OPOST | ONLCR | OCRNL | OXTABS | ONOEOT | ONOCR | ONLRET); t.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CCTS_OFLOW | CRTS_IFLOW | CDTR_IFLOW | CDSR...

...^h; kill = ^u; eof = ^d; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^q; stop = ^s; susp = ^z; dsusp = <undef>; rprnt = ^r; flush = ^o; werase = ^w; lnext = ^v; -parenb -parodd cs8 -cstopb hupcl cread -clocal -loblk -parext -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc ixon -ixany -ixoff -imaxbel isig icanon -xcase echo echoe echok -echonl -noflsh -tostop echoctl -echoprt echoke -defecho -flusho -pendin iexten opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel tab3 I have confirmed that these same problems occur when the client i...

hello short description: ssh client sends a wrong all-zero terminal info when requesting forced pseudo-terminal allocation while stdin is not a terminal. sshd then sets the terminals ospeed to 0 because it receives this information from the client. on solaris this means that the pseudo-terminal is closed and output of any remote command is dropped. longer description: what we're doing is

Hey, I''ve installed Xen 3.0 on a freshly installed Debian Sarge. dom0 is working nicely (kernel 2.6.12.6-xen0). Then I created a domU, again with Debian Sarge, booting Xen''s vmlinuz-2.6.12-xenU. Unfortunately ctrl-c does not work in the domU''s console, neither if I create the domU with "xm create -c ..." nor if I attach to it later. It doesn''t matter

Hello everyone, recently I've found something I consider a bug. Correct me if I'm wrong, but I always thought that Linux' EOL is 0x0A. Imagine my surprise when I saw that all messages that are being output on to the stderr (on any Linux I've tested - Fedora and Ubuntu) are terminated with 0x0D, 0x0A. Maybe that's standard behaviour of all stderr messages in all Linux

...HOME=/opt/R-2.6.1-patched export R_LIBS=/opt/R-2.6.1-patched/lib stty erase ^H set -o vi alias src='cd $HOME/dev/src' alias include='cd $HOME/dev/include' alias bin='cd $HOME/dev/bin' alias mak='cd $HOME/dev/mak' alias lib='cd $HOME/dev/lib' #stty -parenb -istrip -ixany cs8 export PS1='['''$USER''':''$PWD'']' export CVSROOT=:pserver:jcs at 147.46.153.178:/oracle/cvs/repository ] And I has made R-executable and run that. After logging into R-Prompt, I has inputted the commands as follows * Commands [ options...

...?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0; -parenb -parodd -cmspar cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke -flusho -extproc This will prevent QUIT to be signalled when press...

Turns out another user reported the same issue with a slightly different model: https://github.com/networkupstools/nut/issues/231 <https://github.com/networkupstools/nut/issues/231> The "stty -f /dev/cuaU0 raw" trick should help, but I am confused as to why FreeBSD has different "raw" settings than what is set up at the same time as the baud rate:

...speed = t->c_ospeed = speed; +} + +/* + * Make a pre-existing termios structure into "raw" mode: character-at-a-time + * mode with no characters interpreted, 8-bit data path. + */ +void +cfmakeraw(t) + struct termios *t; +{ + + t->c_iflag &= +~(IMAXBEL|IXOFF|INPCK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IGNPAR); + t->c_iflag |= IGNBRK; + t->c_oflag &= ~OPOST; + t->c_lflag &= +~(ECHO|ECHOE|ECHOK|ECHONL|ICANON|ISIG|IEXTEN|NOFLSH|TOSTOP|PENDIN); + t->c_cflag &= ~(CSIZE|PARENB); + t->c_cflag |= CS8|CREAD; + t->c_cc[VMIN] = 1; + t->c_cc[VTIME] =...

...;undef>; >> eol2 =<undef>; swtch =<undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = >> ^R; >> werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; >> -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts >> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon >> -ixoff >> -iuclc -ixany -imaxbel -iutf8 >> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 >> vt0 >> ff0 >> isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop >> -echoprt >> echoctl e...

Im trying to run this program called Thinkboxx and wen it tryes to comunicate over the comm port it hangs. Here are som output to read. earlier on i get: Call kernel32.VirtualAlloc(43050000,00001000,00001000,00000004) ret=0058557c Ret kernel32.VirtualAlloc() retval=43050000 ret=0058557c thats from vhere the com port gets an virtual memory space, i think. and in the end i have: Call

depends on "autoconf: regenerate configure scripts with 4.4 version" This series removes some of the really old deadwood from the tools build and makes some other things which are on their way out configurable at build time with a default depending on how far down the slope I judge them to be. * nuke in tree copy of libaio * nuke obsolete tools: xsview, miniterm, lomount & sv *