search for: isolinux

In fact, I discovered that the bug is caused when there is no primary hard disk image (no hard disk 0). When an HD image is created and attached, ISOLINUX works well: ISOLINUX 1.75 2002-06-14 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 99 isolinux: Loaded spec packet OK, drive = 99 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA = 0000001C isolinux: Sectors to load = 0004 isolinux: Loaded boot i...

..., 3.05, 3.06, 3.08, 3.11, and 3.20pre6. All versions >= 3.05 are broken. All versions <= 3.02 work fine with the same config. The error message I get is: ================================================================ IOSLINUX 3.20 3.20-pre6 Copyright (C) 1994-2005 H. Peter Anvin boot: . ISOLINUX 3.20 3.20-pre6 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... ================================================================ I looked in the various testing/ dirs to try to locate a -preX for 3.05 to narrow down the exact version where it broke, but I was unable...

Hi, some time ago I tried to boot an isolinux boot loader from another one to be able to boot e.g. a Knoppix CD with its original boot loader and menus from a "main" isolinux on a multiboot DVD. This works for isolinux <= 3.07 now! However, newer isolinux boot loaders have some problems and the isolinux (e.g. of the Knoppix C...

Howdy to all, We've been using isolinux quite successfully for quite some time now, and I have come across a couple of laptops where isolinux balks at my config file.. Upon booting on this systems, the image background appears corrupted, and at the boot prompt, the following happens automatically. Unknown keyword in config file. Could n...

Sorry for the delay, we were too busy drinking and playing with explosives yesterday. :) Here are some tests. We did one on a similar machine and it worked. We deleted the configuration file, obviously. # Dell OptiPlex GX620 ISOLINUX 5.11 5.11-pre7 isolinux: Starting up, DL = 82 isolinux: Loaded spec packet OK, drive = 82 isolinux: Main image LBA = 00000115 isolinux: Image checksum error, sorry... # Dell OptiPlex GX620 ISOLINUX 4.06 0x513e88f5 isolinux: Starting up, DL = 82 isolinux: Loaded spec packet OK, drive = 82 isolinux:...

I'm new to the ISOLINUX development cycle, and I've tried a few times to come up with a solution. I'm trying to recompile isolinux.bin to look for the config files in a directory other than root, /boot/isolinux, or /isolinux. Ideally, this directory would be /lpc/isolinux. I've tried changing the plain text v...

I am trying to rebuild Red Hat Linux 9 on DVD. I am using the provided isolinux 2.00 (I tried the latest 2.04, with the same results), and I get an error trying to boot from the DVD. I burned the boot.iso (basically a triple-wide boot disk using the same isolinux directory) to DVD, and it booted fine. The error I get when booting the DVD using isolinux-debug.bin is this...

...tt wrote: > Hi, > > Gerardo Exequiel Pozzi wrote: >> Looks like there is something beyond LBA 65535 (As Mattias confirmed) > > I wanted to ask him now, whether this was already with > version 6. > But meanwhile he reported that it was 5. > > >> I can push isolinux.bin (4.07) to a really high LBA address and boot >> without any issue. (Load LBA: 2048034 (0x001f4022)) ~4G > > This is riddling, given the statement of hpa that the > boot images are identical up to the point where Carl's > boot procedure fails. > There seems to be some l...

....1.2 and nasm is 2.10.07. Binutils is 2.17.50 I am compiling on xenserver 6.0 Thanks Alakesh 31186 bytes (31 kB) copied, 0.000315067 seconds, 99.0 MB/s nasm -f elf -Ox -g -F dwarf -DDATE_STR="'0x5110300a'" \ -DHEXDATE="0x5110300a" \ -l isolinux.lsr -o isolinux.o -MP -MD .isolinux.o.d isolinux.asm ld -m elf_i386 -T syslinux.ld -M -o isolinux.elf isolinux.o \ --start-group libcore.a ../com32/lib/libcomcore.a /usr/lib/gcc/i386-redhat-linux/4.1.2/libgcc.a --end-group \ > isolinux.map objdump -h isolinux.elf...

I have tried to use isolinux 2.05, and I am running into a problem where it will not boot. I have previously used version 1.66, and the older version works just fine. Changing nothing except dropping the new version in does not work. Below is all of the relevant info, I believe. This occurs on multiple machines with different...

...go with the latest syslinux development snapshot in this case 5.10pre1. But I already fail when booting from CD with Failed to load COM32 file .c32 I am a bit perplex since no name of COM32 files is given. I am trying to trace down the issue as good as I can. COM32 files present are: boot/isolinux/chain.c32 boot/isolinux/ifcpu.c32 boot/isolinux/ifcpu64.c32 boot/isolinux/ldlinux.c32 boot/isolinux/libcom32.c32 boot/isolinux/libgpl.c32 boot/isolinux/liblua.c32 boot/isolinux/libmenu.c32 boot/isolinux/libutil.c32 boot/isolinux/menu.c32 boot/isolinux/reboot.c32 boot/isolinux/vesamenu.c32 Every bu...

Hi, I tried to install redhat 8.0 on a laptop and ran into the following problem. ISOLINUX 1.75 2002-06-14 isolinux failed to get sector size, assuming 0800 isolinux: Image checksum error, sorry... At that point, I followed the advice on the isolinux webpage, and reburned a CD using isolinux 2.00 with debug. The error message was: ISOLINUX 2.00 2002-10-25 Copyright (C) 1994-2002 H. Pe...

I've created a bootable cd with isolinux but it can't load the kernel. It detects everything fine, decompresses the initrd, loads and decompresses the kernel and then tries to boot the kernel. But after that the computer hangs. Here's the screen dump: ISOLINUX 1.73 2002-05-26 Copyright (C) 1994-2002 H. Peter Anvin isolinux: St...

While attempting to work on implementing readdir in ISOLINUX, I made it large enough that it overflowed for isolinux-debug. $ make all nasm -O9999 -f elf -g -F stabs -DDATE_STR="'pre11-112-g930881b*'" \ -DHEXDATE="0x49caaf5b" \ -l isolinux.lsr -o isolinux.o isolinux.asm ld -m elf_i386 -T syslinux....

Greetings, I have been using isolinux with Microsoft's cdimage.exe for my Utility / Preinstallation cds. I just upgraded from 3.36 to 3.55 and found it to be non functional. I didn't use the -debug version, it just hangs at the version banner. I went through several previous versions, and it appears that 3.50-pre23 is the l...

...hew Miller via Syslinux wrote: > > It actuallly looks from Adam's investigation that this isn't different > for this package. So, less than certainly. It looks like maybe more a > gcc 5 difference. > > > Regardless of whatever is actually causing this, here is the isolinux-debug.bin output: Booting from DVD/CD... ISOLINUX 6.03 Copyright (C) 1994-2014 H. Peter Anvin et al isolinux: Starting up, DL = E0 isolinux: Loaded spec packet OK, drive = E0 isolinux: Main image LBA = 00000A12 isolinux: Image read, jumping to main code... _ Booting from DVD/CD... ISOLINUX 6...

Hello List, I have a problem with an Onborad scsci, that won't boot a isolinux-cd: anyone got a clue? Mainboard is ASUS-CUV4X-DLS with onboard LSI 35c1010-33 Controller. Board-Bios is Award Medaillion 6.0 and Controller Bios is Symbios SDMS v4.0 (4.18.02) The CDRW device to boot from is a Yamaha CRW2100S Rev1.0H I tried Isolinux 1.63 and 1.66 with similar "success&q...

I'm not exactly sure what you need. Is this it? ISOLINUX 4.06 0x513e88f5 isolinux: Starting up, DL = 82 isolinux: Loaded spec packet OK, drive = 82 isolinux: Main image LBA = 0000011D isolinux: Main image read, jumping to main code... I created an iso with isolinux-debug.bin as the boot loader and booted it on that machine. If this is not what you are l...

I have a USB disk with syslinux files installed in /boot/syslinux, and the bootloader is installed into MBR or VBR I then extracted a *.iso file which uses syslinux as the bootloader, into root dir of the disk. The iso file contains a rescue OS or an OS installer. Now I got the directory /isolinux with files isolinux.bin and isolinux.cfg in this folder I can now boot into syslinux, but *what to do to boot/chainload the isolinux.bin file to launch the OS*? Note that just load the isolinux config file /isolinux/ioslinux.cfg (using "config" module) instead of chainloading entire iso...

...3.51 source package and i have tried to compile syslinux with MinGw. I got the following error message. *********************************************************************** $ make nasm -O99 -f bin -DDATE_STR="'0x47bd5366'" -DHEXDATE="0x47bd5366" \ -DMAP=isolinux.map -l isolinux.lst -o isolinux.bin isolinux.asm isolinux.asm:671: error: parser: instruction expected make: *** [isolinux.bin] Error 1 *********************************************************************** $ make --debug GNU Make version 3.79.1, by Richard Stallman and Roland McGrath. Built for i...