search for: ipv6_defaultgw

...9d36a9d ONBOOT=yes DEVICE=eth0 BOOTPROTO=none HWADDR=00:50:56:01:00:01 BROADCAST=192.168.0.255 IPADDR=192.168.0.10 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 DNS1=192.168.0.1 DNS2=192.168.0.100 DOMAIN='domain.tld' USERCTL=no IPV6INIT=yes IPV6ADDR=ipv6addr IPV6_AUTOCONF=no IPV6_DEFAULTGW=ipv6addr-gateway IPV6_DEFAULTDEV=eth0 if I would need an additional IPv6 address I'd just add IPV6ADDR_SECONDARIES="ipv6addr" to this file; if I would need an additional IPv4 address this works only by a virtual device e.g. eth0:1 like this: /etc/sysconfig/network-scripts/ifcfg-eth...

...as misguided answer. The setting of the IP address reaches by manual operation. # cat /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO="none" ONBOOT=yes HWADDR=08:00:27:83:74:54 IPADDR=192.168.11.8 NETMASK=255.255.255.0 IPV6INIT=yes IPV6ADDR=2000:8000:12:6:192:168:11:8/64 IPV6_DEFAULTGW=2000:7000:12:6::1 ? link up # ethtool eth1 Settings for eth1: ? Link detected: yes # ifdown eth1 # ifup eth1 # ifconfig eth1 eth1 Link encap:Ethernet HWaddr 08:00:27:83:74:54 inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::a...

...config/network-scripts/ifconfig-eth2 (centosv0) as this DEVICE="eth2" BOOTPROTO=static HWADDR="60:A4:4C:23:2F:6F" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" #UUID="0ddcf499-878f-4ac7-9d1a-c27f85d2bccf" IPV6INIT=yes IPV6ADDR=1:2:3::4 IPV6_DEFAULTGW=1:2:3::5 and i also configure /etc/sysconfig/network to this: NETWORKING=yes HOSTNAME=centosv0 NETWORKING_IPV6=yes IPV6_AUTOCONF=no but i met an error: Bringing up interface eth2: WARN : [ipv6_add_route] Unknown error i do not know how why,and can some one gives me some suggestion? thanks a...

...TROLLED="yes" ONBOOT="yes" HWADDR="DE:DB:EE:CD:8E:03" TYPE=Ethernet BOOTPROTO=static GATEWAY=xxx.xxx.xxx.129 NETWORK=xxx.xxx.xxx.128 IPADDR=xxx.xxx.xxx.130 NETMASK=255.255.255.248 BROADCAST=xxx.xxx.xxx.135 IPV6INIT=yes IPV6_AUTOCONF=no IPV6ADDR=2001:xxxx:xxxx:xxxx::130 IPV6_DEFAULTGW=2001:xxxx:xxxx:14::1 DNS1=xxx.xxx.xxx.211 DNS2=xxx.xxx.xxx.210 DNS3=2001:xxxx:xxxx:xxxx::210 IPV4_FAILURE_FATAL=no IPV6_FAILURE_FATAL=no DOMAIN="example.com example.com" -------------------------------------------------------------- I've tried: ---------------------------------------...

I can't get IPv6 routing to configure correctly despite everything I've read saying it should This is my network config on a fully-updated CentOS 5.8 system: # cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=my.hostname.com GATEWAY=aaa.bbb.ccc.ddd IPV6_DEFAULTGW=2a02:aaaa.bbbb::1 IPV6_DEFAULTDEV=eth0 # cat /etc/sysconfig/network-scripts/ifcfg-eth0 ONBOOT=yes DEVICE=eth0 BOOTPROTO=static HWADDR=52:54:00:68:42:1E IPADDR=000.111.222.333 NETMASK=255.255.255.128 IPV6INIT=yes IPV6ADDR=2a02:aaaa.bbbb:178:209:50:230:0/112 Attempts to use the IPv6 addre...

Hello, in /etc/sysconfig/network-scripts/ifcfg-eth0 I have this <ifcfg-eth0> ... IPV6INIT=yes IPV6ADDR=prefix::5 IPV6ADDR_SECONDARIES="prefix::2 prefix::3 prefix::4" IPV6_AUTOCONF=no IPV6_DEFAULTGW=prefix::1 IPV6_DEFAULTDEV=eth0 </ifcfg-eth0> when I enter ifconfig the IPv6 addresses are in a different order <ifconfig> eth0 Link encap:Ethernet HWaddr ... inet addr:... Bcast:... Mask:... inet6 addr: fe80::.../64 Scope:Link inet6 addr: prefix::4/64 Scope:Global inet6 addr: prefix::3/...

...pv6 at http://www.deepspace6.net/projects/initscripts-ipv6.html#id2801589 and using the following configs: /etc/sysconfig/network NETWORKING=yes GATEWAY=***.***.***.*** GATEWAYDEV=eth0 HOSTNAME=vadtec NETWORKING_IPV6=yes IPV6FORWARDING=no IPV6_AUTOCONF=no IPV6_AUTOTUNNEL=no IPV6_DEFAULTDEV=eth0:1 IPV6_DEFAULTGW=2001:0470:0103:001A::1 /etc/sysconfig/network-scripts/ifcfg-eth0-1 DEVICE=eth0:1 IPV6INIT=yes IPV6ADDR=2001:0470:0103:001A:0001:0000:0000:0000:/96 IPV6_AUTOCONF=no IPV6_ROUTER=no IPV6FORWARDING=no ONBOOT=no When I run service network restart, it doesn't even provision the default IPv6 GW on e...

...RT_VARS["OVIRT_IPV6_ADDRESS"], OVIRT_VARS["OVIRT_IPV6_NETMASK"]) self.BR_CONFIG += "set %s/IPV6_AUTOCONF no\n" % BR_ROOT self.BR_CONFIG += "set %s/IPV6FORWARDING no\n" % BR_ROOT + self.BR_CONFIG += "set %s/IPV6_DEFAULTGW %s\n" % (BR_ROOT, OVIRT_VARS["OVIRT_IPV6_GATEWAY"]) else: self.BR_CONFIG += "set %s/IPV6INIT no\n" % BR_ROOT self.BR_CONFIG += "set %s/IPV6_AUTOCONF no\n" % BR_ROOT diff --git a/scripts/ovirt-config-setup.py b/scripts/ovirt-confi...

...irewall's public interface. For now in ifcfg-eth0 I have the lines: DEVICE=eth0 BOOTPROTO=static HWADDR=00:40:F4:05:A8:F1 IPV6INIT=yes IPV6_AUTOCONF=no IPV6ADDR="2607:F4B8:3:1:0:40:F405:A8F1" ONBOOT=yes And in network I have: NETWORKING=yes NETWORKING_IPV6=yes IPV6FORWARDING=yes IPV6_DEFAULTGW="2607:F4B8:3:1:50:BA42:8249%eth0" But when I restart network (service network restart) I get: Bringing up interface eth0: WARN : [ipv6_add_route] Unknown error [ OK ] and ip -6 route show dev eth0 generates: 2607:f4b8:3...

.../sysconfig/network-script/ifcfg-br4 DEVICE=br4 TYPE=Bridge ONBOOT=yes BOOTPROTO=static IPADDR=ipv4address here NETMASK=255.255.255.0 DNS1=mydnsserver.org DELAY=0 NM_CONTROLLED=no IPV6INIT=yes IPV6_AUTOCONF=no #IPV6_DEFROUTE="yes" IPV6_FAILURE_FATAL=yes IPV6ADDR=2a11:c99:4111:110::11:65/64 IPV6_DEFAULTGW= 2a11:c99:4111:110::11:211 I can ping the gateway from the kvm host but I cannot ping6 out from the kvm guest, also I cannot ping kvm guest from external host that is in ipv6 network. I appreciate some guidance on this. -------------- next part -------------- An HTML attachment was scrubbed... UR...

...nfig/network-scripts/ifcfg-eth0 TYPE=Ethernet NAME=eth0 NM_CONTROLLED=no ONBOOT=yes DEVICE=eth0 USERCTL=no ... IPV6INIT=yes IPV6ADDR=2001:DB8:DEAD:BEEF::10 IPV6ADDR_SECONDARIES="2001:DB8:DEAD:BEEF::20 2001:DB8:DEAD:BEEF::30 2001:DB8:DEAD:BEEF::40 2001:DB8:DEAD:BEEF::50" IPV6_AUTOCONF=no IPV6_DEFAULTGW=2001:DB8:DEAD:BEEF::1 IPV6_DEFAULTDEV=eth0 I have a virtual server, and there are the alias addresses splitted, e.g. IPv6 2001:DB8:DEAD:BEEF::40 is used by BIND (named, authoritativ DNS server) IPv6 2001:DB8:DEAD:BEEF::30 is used by MTA (postfix, DNS has this for MX of this domain) IPv6 2001:DB8...

...RT_VARS["OVIRT_IPV6_ADDRESS"], OVIRT_VARS["OVIRT_IPV6_NETMASK"]) self.BR_CONFIG += "set %s/IPV6_AUTOCONF no\n" % BR_ROOT self.BR_CONFIG += "set %s/IPV6FORWARDING no\n" % BR_ROOT + self.BR_CONFIG += "set %s/IPV6_DEFAULTGW %s\n" % (BR_ROOT, OVIRT_VARS["OVIRT_IPV6_GATEWAY"]) else: self.BR_CONFIG += "set %s/IPV6INIT no\n" % BR_ROOT self.BR_CONFIG += "set %s/IPV6_AUTOCONF no\n" % BR_ROOT diff --git a/scripts/ovirt-config-setup.py b/scripts/ovirt-confi...

...6 instances. I'm hoping someone can point me in the right direction... tshark indicates that it's neighbor discovery that's failing: <centos666.peak.org> [26] # cat ../network NETWORKING=yes HOSTNAME=centos666.peak.org GATEWAY=207.55.16.1 NETWORKING_IPV6=yes IPV6_AUTOTUNNEL=no IPV6_DEFAULTGW=2607:f678::1 <centos666.peak.org> [27] # cat ifcfg-eth0 DEVICE="eth0" NM_CONTROLLED="no" ONBOOT="yes" TYPE=Ethernet BOOTPROTO=none IPADDR=207.55.16.66 PREFIX=22 GATEWAY=207.55.16.1 DNS1=69.59.192.71 DNS2=69.59.192.72 DOMAIN=peak.org DEFROUTE=yes IPV6INIT=yes NAM...

> Try > > ping6 -I eth1 2000:8000:12:6:192:168:11:8 Thanks for the response. I tried. However, It did not resolve.... # ping6 -I eth1 2000:8000:12:6:192:168:11:8 PING 2000:8000:12:6:192:168:11:8(2000:8000:12:6:192:168:11:8) from fe80::a00:27ff:fe03:5b8a eth1: 56 data bytes On 2015/11/13 2:22, Paul Heinlein wrote: > On Thu, 12 Nov 2015, ???? wrote: > >> Hello >>