search for: ipv6_defaultdev

...up ifconfig sit0 inet6 tunnel ::IPV4 Address ifconfig sit1 up ifconfig sit1 inet6 add IPV6 Address route -A inet6 add ::/0 dev sit1 Testing that with a ping6 works fine. I then want it to persist across reboots. So I added the following to /etc/sysconfig/network: NETWORKING_IPV6=yes IPV6_DEFAULTDEV=sit1 and I made /etc/sysconfig/network-scripts/ifcfg-sit1 DEVICE=sit1 BOOTPROTO=none ONBOOT=yes IPV6INIT=yes IPV6TUNNELIPV4=IPV4 Address IPV6ADDR=IPV6 Address Reboot the box, check sit1 and it has an ip address. Running that ping6 command says the networ...

...OOTPROTO=none HWADDR=00:50:56:01:00:01 BROADCAST=192.168.0.255 IPADDR=192.168.0.10 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 DNS1=192.168.0.1 DNS2=192.168.0.100 DOMAIN='domain.tld' USERCTL=no IPV6INIT=yes IPV6ADDR=ipv6addr IPV6_AUTOCONF=no IPV6_DEFAULTGW=ipv6addr-gateway IPV6_DEFAULTDEV=eth0 if I would need an additional IPv6 address I'd just add IPV6ADDR_SECONDARIES="ipv6addr" to this file; if I would need an additional IPv4 address this works only by a virtual device e.g. eth0:1 like this: /etc/sysconfig/network-scripts/ifcfg-eth0:1 # Intel Corporation 82545EM G...

...routing to configure correctly despite everything I've read saying it should This is my network config on a fully-updated CentOS 5.8 system: # cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=my.hostname.com GATEWAY=aaa.bbb.ccc.ddd IPV6_DEFAULTGW=2a02:aaaa.bbbb::1 IPV6_DEFAULTDEV=eth0 # cat /etc/sysconfig/network-scripts/ifcfg-eth0 ONBOOT=yes DEVICE=eth0 BOOTPROTO=static HWADDR=52:54:00:68:42:1E IPADDR=000.111.222.333 NETMASK=255.255.255.128 IPV6INIT=yes IPV6ADDR=2a02:aaaa.bbbb:178:209:50:230:0/112 Attempts to use the IPv6 address fail. For example: # ping6 -c...

Hello, in /etc/sysconfig/network-scripts/ifcfg-eth0 I have this <ifcfg-eth0> ... IPV6INIT=yes IPV6ADDR=prefix::5 IPV6ADDR_SECONDARIES="prefix::2 prefix::3 prefix::4" IPV6_AUTOCONF=no IPV6_DEFAULTGW=prefix::1 IPV6_DEFAULTDEV=eth0 </ifcfg-eth0> when I enter ifconfig the IPv6 addresses are in a different order <ifconfig> eth0 Link encap:Ethernet HWaddr ... inet addr:... Bcast:... Mask:... inet6 addr: fe80::.../64 Scope:Link inet6 addr: prefix::4/64 Scope:Global inet6 addr: prefix::3/64 Scope:Global inet6 addr...

.../network-scripts/ifup-ipv6 at http://www.deepspace6.net/projects/initscripts-ipv6.html#id2801589 and using the following configs: /etc/sysconfig/network NETWORKING=yes GATEWAY=***.***.***.*** GATEWAYDEV=eth0 HOSTNAME=vadtec NETWORKING_IPV6=yes IPV6FORWARDING=no IPV6_AUTOCONF=no IPV6_AUTOTUNNEL=no IPV6_DEFAULTDEV=eth0:1 IPV6_DEFAULTGW=2001:0470:0103:001A::1 /etc/sysconfig/network-scripts/ifcfg-eth0-1 DEVICE=eth0:1 IPV6INIT=yes IPV6ADDR=2001:0470:0103:001A:0001:0000:0000:0000:/96 IPV6_AUTOCONF=no IPV6_ROUTER=no IPV6FORWARDING=no ONBOOT=no When I run service network restart, it doesn't even provision th...

...=Ethernet NAME=eth0 NM_CONTROLLED=no ONBOOT=yes DEVICE=eth0 USERCTL=no ... IPV6INIT=yes IPV6ADDR=2001:DB8:DEAD:BEEF::10 IPV6ADDR_SECONDARIES="2001:DB8:DEAD:BEEF::20 2001:DB8:DEAD:BEEF::30 2001:DB8:DEAD:BEEF::40 2001:DB8:DEAD:BEEF::50" IPV6_AUTOCONF=no IPV6_DEFAULTGW=2001:DB8:DEAD:BEEF::1 IPV6_DEFAULTDEV=eth0 I have a virtual server, and there are the alias addresses splitted, e.g. IPv6 2001:DB8:DEAD:BEEF::40 is used by BIND (named, authoritativ DNS server) IPv6 2001:DB8:DEAD:BEEF::30 is used by MTA (postfix, DNS has this for MX of this domain) IPv6 2001:DB8:DEAD:BEEF::20 and 2001:DB8:DEAD:BEEF:...

We've been running ipv6 for a year or so now, but some of our newer instances (all on an ESX cluster) are not working. It looks like it's all of our Centos 6 instances. I'm hoping someone can point me in the right direction... tshark indicates that it's neighbor discovery that's failing: <centos666.peak.org> [26] # cat ../network NETWORKING=yes