search for: ipt_physdev

Hi I have recently reconfigured my system to a Bridge based architecture on the basis that I have an ADSL Modem/Router with a Public address on the Wan side and a Private address on the Lan side. I am running a Debian based system kernel 2.6.7 and the Bridging software is installed and working correctly, including startup etc. The problem that I have is in "shorewall start" The

Hi Tom and other gurus, I modified SHOREWALL (version 2.0.15) for bridging and I cannot restart it. I got the following error ... Processing /etc/shorewall/policy... Policy ACCEPT for fw to net using chain fw2net Policy REJECT for fw to loc using chain all2all Policy DROP for net to fw using chain net2all Policy ACCEPT for loc to fw using chain loc2fw Policy ACCEPT for loc to net

...ile patching file net/ipv4/netfilter/Config.in The next patch would create the file net/bridge/br_netfilter.c, which already exists! Assume -R? [n] n Apply anyway? [n] n Skipping patch. 1 out of 1 hunk ignored -- saving rejects to file net/bridge/br_netfilter.c.rej patching file net/ipv4/netfilter/ipt_physdev.c patching file include/linux/netfilter_ipv4/ipt_physdev.h patching file net/8021q/vlan_dev.c Hunk #1 succeeded at 507 (offset 4 lines). [root@specwall linux-2.4.22-1.2166.nptl]#

Here''s the latest USB code against the xen 3.0.0 release. Since the last posting this version updates the code to use the new 32 bit grant references and the latest GNTTABOP_map_grant_ref definition. I''ve also changed the definition of the virtual USB HCD to have a single port rather than seven ports with six unused. Domains importing multiple USB devices will get a HCD for

I am planning to schedule a monthly XCP meeting for the community and am struggling with when to host the call. As we are a global community, there is no single optimal time to host the meeting. In an effort to support the most likely attendees, please send me your time zone if you plan to participate in these calls. I will track the most common time zones in an effort to maximize attendance. All

I am planning to schedule a monthly XCP meeting for the community and am struggling with when to host the call. As we are a global community, there is no single optimal time to host the meeting. In an effort to support the most likely attendees, please send me your time zone if you plan to participate in these calls. I will track the most common time zones in an effort to maximize attendance. All

...h 1074 bridge.ko ip_sabotage_in 1119 ebtable_filter.ko ebt_hook 1177 sky2.ko sky2_phy_stats 1304 bridge.ko setup_pre_routing 1417 bridge.ko br_fdb_cleanup 1425 sky2.ko sky2_put_idx 1766 ipt_physdev.ko .text 2113 bridge.ko br_nf_pre_routing_finish 2133 bridge.ko br_nf_forward_ip 2314 bridge.ko br_handle_frame_finish 2454 bridge.ko br_dev_queue_push_xmit 2515 bridge.ko ip_sabotage_out 2718...

(I''m not a member of the list at the moment so please answer this e-mail CC to my personal address. Thank you all) I am part of a community network in Buenos Aires and I''m now trying to set up a bridge between my local net and the community net. The problem is that appart from the bridge between these I need to share an internet connection and the cable modem assigns me a

...ded into it and the aoe-tools version is 10. The stack trace of the crash is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: c012cc32 *pde = ma 8da99067 pa 32e99067 *pte = ma 00000000 pa 55555000 Oops: 0002 [#1] SMP Modules linked in: ipt_physdev iptable_filter ip_tables aoe bridge nfs lockd ppdev vmnet vmmon sg parport_pc lp parport autofs4 sunrpc af_packet binfmt_misc dm_mirror dm_multipath video thermal processor fan button battery ac ipv6 md ohci1394 ieee1394 uhci_hcd intel_agp agpgart i2c_i801 i2c_core pci_hotplug snd_intel8x0 snd_ac97...

I''m very new to shorewall. My setup is IP Gateway (CentOS 4 + Shorewall) with 3 NIC cards. Shorewall works great on the firewall machine. Bind also works (local net machines get IPs fine). Under firestarter, all works great. With shorewall, the loc machines can not route past the firewall. They can connect to the firewall, but not past it. Exactly what information should I post to get

...s snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd soundcore lp parport_pc ppdev parport ipt_REJECT ipt_LOG ipt_state ipt_pkttype ipt_set ipt_CONNMARK ipt_MARK ipt_ROUTE ipt_connmark ipt_owner ipt_recent ipt_iprange ipt_physdev ipt_multiport ipt_conntrack iptable_mangle ip_set_portmap ip_set_macipmap ip_set_ipmap ip_set_iphash ip_set ip_nat_irc ip_nat_tftp ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp ip_conntrack iptable_filter ip_tables 8139too mii af_packet ide_cd loop ext3 jbd nls_iso8859_...

...0 dev ppp0 Table default: ARP ? (192.168.1.105) at 00:0C:6E:D7:65:D1 [ether] on eth0 ? (10.0.0.138) at 00:90:D0:39:56:A7 [ether] on eth1 Modules ipt_MASQUERADE 3968 1 ipt_REJECT 6528 4 ipt_LOG 6272 10 ipt_TCPMSS 4480 1 ipt_state 2304 16 ipt_pkttype 2048 4 ipt_recent 10252 0 ipt_iprange 2048 0 ipt_physdev 2320 0 ipt_multiport 2304 2 ipt_conntrack 2816 0 ip_nat_irc 4464 0 ip_nat_tftp 3696 0 ip_nat_ftp 4976 0 ip_conntrack_irc 71600 1 ip_nat_irc ip_conntrack_tftp 3888 0 ip_conntrack_ftp 72240 1 ip_nat_ftp ip_conntrack 32520 10 ipt_MASQUERADE,ipt_state,ipt_conntrack,ip_nat_irc,ip_nat_tftp,ip_nat_ftp,ipt...

...6272 13 ipt_state 1312 13 ipt_pkttype 1184 4 ipt_CONNMARK 1696 0 ipt_MARK 1984 0 ipt_ROUTE 4260 0 ipt_connmark 1216 0 ipt_owner 2432 0 ipt_recent 9292 0 ipt_iprange 1312 0 ipt_physdev 1744 0 ipt_multiport 2112 0 ipt_conntrack 1792 0 ip_set_portmap 3840 0 ip_set_macipmap 3780 0 ip_set_ipmap 3872 0 ip_set_iphash 5924 0 ip_set 18876 8 ip_set_portmap,ip_set_macipmap,ip_set_ipmap,ip_set_iph...

Hi folks, Has anyone tested the changes to multiple ISPs/load balancing or routestopped in 2.4.0-RC1 yet? We need to talk about what criteria we will use for determining whether 2.4.0 is ready for release. I''ve started configuring a firewall at work with the multiple ISPs support, but its kernel doesn''t have connection marking support, so it''s going to be a couple of

I have problem with IP public, my Network configuration [wireless] <------> [Router] <------ > [ Linux proxy ] < ------ > [Client ] IP configuration [202.123.123.1] <------->[202.123.123.2 and 192.168.0.1] < ------ > [192.168.0.2 and 202.123.123.3] < ------ > [202.123.123.4] this configuration will use IP 202.123.123.2 on internet how to config my network

...2048 1 ipt_tcpmss 2368 0 ipt_MASQUERADE 4032 1 ipt_REJECT 7104 4 ipt_LOG 6656 8 ipt_TCPMSS 4480 0 ipt_state 2112 19 ipt_pkttype 1792 4 ipt_recent 11148 0 ipt_iprange 1856 0 ipt_physdev 2192 14 ipt_multiport 2112 2 ipt_conntrack 2688 0 ip_nat_irc 4400 0 ip_nat_tftp 3504 0 ip_nat_ftp 5104 0 ip_conntrack_irc 71472 1 ip_nat_irc ip_conntrack_tftp 3760 0 ip_conntrack_ftp 72368 1 ip_nat_ftp...

Hello, You will find in attachment the layout of my current physical configuration. For now, the Cable ISP is not used. Since it is a dynamic ISP, my mailserver is rejected and my domain name registers on blacklists like ORDB and al. I want it to be used as a default gateway except for my mail server that would be seen as coming from my "honest" ADSL ISP. Here is

...local modulefile ++ local suffix ++ moduleloader=modprobe ++ qt which modprobe ++ which modprobe +++ lsmod +++ grep ip_tables ++ ''['' -z ''ip_tables 23936 19 ipt_ROUTE,ipt_MASQUERADE,ipt_MARK,ipt_mark,ipt_CONNMARK,ipt_connmark,ipt_owner,ipt_recent,ipt_iprange,ipt_physdev,ipt_multiport,ipt_REJECT,ipt_conntrack,ipt_pkttype,ipt_LOG,ipt_state,iptable_mangle,iptable_nat,iptable_filter'' '']'' ++ loadmodule iptable_filter ++ local modulename=iptable_filter ++ local modulefile ++ local suffix ++ moduleloader=modprobe ++ qt which modprobe ++ which m...