Displaying 10 results from an estimated 10 matches for "ip_no_pmtu_disc".
2006 Feb 18
0
Re: Tftp problems with ARC firmware
Ralf Baechle wrote:
> I'd like to point those who you need to use these crude workarounds:
>
> echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc
> echo 4096 32767 > /proc/sys/net/ipv4/ip_local_port_range
>
> at a new version of tftp-hpa which solves the PMTU problem by disabling it
> only for the tftp client and introduces a new -R begin:end option which
> allows to limit the port number range. The changes are about to...
2005 Jul 28
1
IP-ID in RTP/UDP/IP packets
Hi All,
I am doing some testing with the asterisk server and have been
monitoring the packets exchanged during a SIP-ZAPTEL phone call.
I see that the IP-ID in all of the RTP/UDP/IP packets are set to zero.
After some googling, I have learnt that some of the linux
implementations set the IP-ID to 0 (if the DF bit is set in the IP
header) if the two hosts exchanging data are on the same subnet.
2003 Mar 18
1
Intel 82557-based Integrated Ethernet PCI (10/100)
...e ws displays "no PXE server
found - switching to TFTP:". That is, Etherboot never gets going on ws.
I printed your syslinux.zytor.com/hardware.php page where possible
problems w/ Intel .99 series is addressed. I am attempting to do the
workaround suggested. I set the /proc/sys/net/ipv4/ip_no_pmtu_disc to 1
but don't understand how to disable the blksize on the TFTP server. I
have Suse 8.1 as a server. I have their doc but can't find much about
TFTP. Please try to refer me if you can't help. Thank you. jr
2002 Apr 27
1
Enlightenment needed on file transfer
Hello,
I'm experiencing strange behavior on ssh-enabled file transfers (scp
and rsync):
When connecting to the Internet through an RTC PPP link to a certain
provider, file transfers from a remote host (debian potato) to my local
host (debian woody) get immediately stuck when issued from the local host,
while they work very well when issued from the remote host.
On the other hand, no
2018 Apr 25
2
Speedup windows client [was] What is the maximum speed for download from a samba share
...ou tweak your MTU sizes?
With things like :
iptables -A PREROUTING --match policy --pol ipsec --dir in -i eth+ -p tcp -m tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1361:1536 -j TCPMSS --set-mss 1360
Maybe disable Path MTU discovery to prevent packet fragmentation problems. Helps alo ( net/ipv4/ip_no_pmtu_disc=1 )
Last, login on the proxymod monitor IRQ use, if you have extra cards in the server, you might have one the using a "shared IRQ"
I make sure, if possible, that my NIC have there own irq set and not a shared one.
And can you post your smb.conf ? That might help also.
Greetz,...
2018 May 02
0
Speedup windows client [was] What is the maximum speed for download from a samba share
...U sizes?
No
> With things like :
> iptables -A PREROUTING --match policy --pol ipsec --dir in -i eth+ -p tcp -m tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1361:1536 -j TCPMSS --set-mss 1360
> Maybe disable Path MTU discovery to prevent packet fragmentation problems. Helps alo ( net/ipv4/ip_no_pmtu_disc=1 )
>
> Last, login on the proxymod monitor IRQ use, if you have extra cards in the server
it is a virtual machine on a proxmox root server
I just realized that the data transfer rate is going down after a while
also on a linux workstation to the same slow speed as on windows
workstation....
2017 Nov 03
4
samba 4.x slow ...
just to verify basic facts:
Did you cross check vie network sniff, on which SMB protocol versions Server + Win 7 clients agree ?
Or did you pin down via registry ?
AFAIK only starting with win 8 or win 10 clients you could ask with powershell, which protocol version is in use.
Did you also cross check samba logs for a name resolution issue ( windows names, not DNS)
if one of your boxes is an
2004 Oct 08
1
timeout: retrying... with atftpd and pxelinux
I'm trying to network boot a thin client using pxelinux. I had this working
about a year ago but have since reinstalled my OS (went from RH9 to FC2). I'm
using atftpd. The thin client gets the dhcp address fine and requests
pxelinux.0. Eventually, it just times out. Here's the relevant info from
/var/log/messages:
Oct 7 23:14:36 home atftpd[4717]: Advanced Trivial FTP server started
2018 Apr 21
3
What is the maximum speed for download from a samba share
> Limiting the linux-server's max cpu-speed had
> the most affect on performance:
> (limited to 1.6GHz instead of 2.4GHz) (33% limitation)
The server is equipped with an 6 core / 12 tread 3.6 GHz CPU (Intel Core
i7-980x and a Raid 10 Disk array.
The cpu is 90% idle (including webserver traffic and mailserver traffic)
during downloads.
There is no encryption because the samba VM
2003 Feb 03
4
[Bug 40] system hangs, Availability problems, maybe conntrack bug, possible reason here.
https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=40
laforge@netfilter.org changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
------- Additional Comments From laforge@netfilter.org 2003-02-03 16:49 -------
We haven't seen this