search for: ip500s

Hi, I just got and setup a new ip500 yesterday and it worked for about 15 minutes. Then it froze during a reboot.Now, when power cycled, the logo comes on for 3 seconds and then the screen is blank and nothing further happens. 468* factory reset doesn't work. I am about to send the phone back, but wonderd if anyone had a suggestion first.

Hi, I just got my ip500 back after months of waiting. Is there an easy way to get it hooked up to asterisk without [t]ftp servers and all that or is there a quickstart page somewhere? tia r

Hello, Does anybody have the latest Boot ROMs for the IP500 and IP 600 Polycom phones. I have one of each and can't find the Boot ROM v 3 anywhere to download. I would also love a good sample phone.cfg and sip.cfg files from an Aussie asterisk user to look at. Also the ip500 is having problems trying to load the bootrom 2.6.2 ? Any ideas? Kind regards Michael Felder IT Medic

Hi Everyone, I've been asked to determine which phones our organization should go with. And I've narrowed it down to the Polycom IP500 or the Cisco 7940. From my travels through google, it's hard to find a definitive comparison of the two phones. So I thought I would ask the people that have probably used both. From what I can tell, the only major benefit the Cisco has over the

Hello all, Has anyone used the SIP version of this phone with Asterisk? I see Polycom has a H.323 and MGCP version also, does anyone know if you flash the phone to swith protocols? Thanks in advance for the info. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm

I've had an IP300 for a while now and it's been working fine. I just got an IP500 and when it connects to the FTP server it downloads the new bootrom and says error loading. The bootrom is fine and works on the 300... In addition, I downloaded a new copy to be sure and it still doesn't work. Can anyone give me some advice?

I'm guessing that I need more info entered into the 'message centre' section. What did you key in? Paul Hales IT Support Adairs -----Original Message----- From: Jeff Pyle [mailto:jpyle490@gmail.com] Sent: Friday, 17 September 2004 11:27 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Polycom IP500 I have two IP 500's on my Asterisk

So far no one I have talked to has either had this issue or does not know a answer. I currently run asterisk 1.0.9. I have two issues to deal with. 1. The caller waiting caller ID does not show on the uniden hand held that is hooked to a sipura spa 1000 or my Polycom ip500. 2. When a caller is calling in and I hear the caller waiting beep on the line when talking with somone, is there no way

I just noticed something when I 'sip show peers' from the CLI, I get the following: 6113/6113 x.x.x.x D N 255.255.255.255 62927 OK (66 ms) 6112/6112 x.x.x.x D N 255.255.255.255 50079 OK (160 ms) 6111/6111 x.x.x.x D N 255.255.255.255 60810 OK (141 ms) 6109/6109 x.x.x.x D N 255.255.255.255 51331 OK (151 ms) All of those

I've been looking at Asterisk for a while now, and want to set up a small installation at my house. I did originally want to get a Cisco IP phone, but due to price and it not being easy to obtain the SIP firmware I have decided again them. I am very interested in the Polycom IP500. I can find many places in the USA that sell it but nowhere in the UK. Also can anyone recommend some good

Hi I am just getting started with asterisk and trying out using the sample files with a Polycom IP500 (latest sip.ld etc) My question: phone status says not registered: /system status/server status "Line 1 poly is not registered" console message says: handle_request: Registration from '<sip:poly@10.1.20.3>' failed for '10.1.20.50' I have tried dialing and

Greetings, I'm wondering if it's possible to display line breaks with caller ID display. I have the Polycom ip500 phone, and what I am trying to accomplish is instead of the phone saying 'Incoming call from: name/number' i want it to appear on the phone like this Incoming Call from: Menu Context last in Name Number I tried using \n and \\n between the variables (${VAR} \\n

Did you try to boot without lan just the power ... I've had this same problem to and rebooted the device without lan connection -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Louis-David Mitterrand Sent: woensdag 26 januari 2005 11:36 To: 'Asterisk Users Mailing List - Non-Commercial Discussion'

tuning for ulaw g.711 - Polycom IP500 I've got QoS ironed out at this point (dedicated section of bandwidth with VoIP having priority), yet ulaw is still unusable due to small 'holes' in the audio. Running iperf tests shows packet loss at very low percentages (< 0.02 %), and when we do drop, it's only 1 packet at a time. I thought ulaw was supposed to handle this OK.

Does anyone have any sample configuration files for the Polycom IP500 phones that have been cleaned from the samples that come with the 1.5.2 firmware. I'm wondering how much is necessary, and how much will just work by default. I am really only setting the line authentication , and sntp/timezone-offset for each phone, and everything else is just left as default. Can I just pull unchanged

Hi, Im having problems getting a polycom IP500 phone to register. Ive edited the xml files and appropriate .cfg files and it shows up registered with no ip address and if I go into the phones status menu and pick lines it says its not registered. If I tell it to upload the log file it doesn't say anything about why its not registering / what errors its getting. Any advice is appreciated.

While I'm asking about the Polycom ip500, the answers for all phones where mic/handset/headset levels are adjustable would be of interest to many I'm sure. For the ip500, the default value for the handset seems to be voice.gain.tx.analog.handset="3" I've noticed that echo all but goes away when one reduces the mic volume on almost any phone. My question is, for you users

Adam, Tor sent this one a little while ago that looks really promising for solving the problem. Wiley -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tor Setane Sent: Thursday, January 06, 2005 2:09 AM To: Noah Miller Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Re:

Hello everyone. I can place outgoing calls no problem with my IP500 (using teliax as our provider). Thing is, when a call comes in, 90% of the time when I pick up the handset it drops the call immediately. I turned on SIP debug, and have listed my extension config from sip.conf. Any help is greatly appreciated.... sooo close.... TIA! -Ron [3004] type=friend username=3004 password=XXX

I have these phones working well with Asterisk, thanks to http://www.freedomphones.net/polycom/files The code there is not the most current (and my Polycom Extranet login hasn't gotten updated yet to allow downloads). Been waiting a while for their support folks to update the access. If you know where I can get the 2.5.0 BootROM and 1.3.1 SIP code? Thanks, L.