search for: invaling

Hi, I'm using asterisk 1.2.7.1 and somehow my iax trunking is getting these problem :S. Sometimes iax acts weird and start to drop calls randomly and give these at the log: May 16 13:44:22 DEBUG[5264] chan_iax2.c: Immediately destroying 6, having received INVAL May 16 13:44:22 DEBUG[5264] chan_iax2.c: Immediately destroying 6, having received INVAL May 16 13:44:22 DEBUG[5264]

I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is

Is anybody here familiar with the meaning of INVAL packets for IAX2? Every few days I get a dropped outgoing call in the middle of the conversation (the outgoing call has been connected for few minutes) when an incoming call comes in. The log reads the following when this happens: [Nov 17 15:25:04] DEBUG[5138] chan_iax2.c: Immediately destroying 2963, having received INVAL [Nov 17 15:25:04]

I was wondering if anyone had seen this problem before and/or could offer any insight into what the trouble might be: I have an Asterisk machine that it set up as a mutual friend with another one (in another state... about 150ms away). Calls between the two fail to get established approximately 50% of the time. When a call works, everything is fine. When one fails, however, I see a large

All, Has anyone seen INVAL messages on an IAX link before? I'm occasionally getting them from my Gateway provider, and I need to narrow down the potential cause. Symptoms are: Incoming calls fail, I see NEW, AUTHREQ then INVAL messages between the two A*k boxes... then for no reason at all it'll start working ok again.. My Asterisik: 1.2.10, Gateway A*k : 1.2.0

I had a working 1.0.9 asterisk installation and tried to get a Firefly IAX phone to register, but it was failing. I upgraded to asterisk 1.2.5 and the PBX is working fine, but the IAX phone still won't connect. Below is my iax.conf and the output from setting iax2 debug while the phone tries to connect. Could somebody please give me some pointers? This doesn't seem to be a normal

libswfdec/swfdec_text_field.c | 288 ---------------------------------- libswfdec/swfdec_text_field.h | 14 - libswfdec/swfdec_text_field_movie.c | 297 +++++++++++++++++++++++++++++++++++- 3 files changed, 291 insertions(+), 308 deletions(-) New commits: commit 2e79c953066b7f6857e88e7efaaed4d8846e9609 Author: Pekka Lampila <pekka.lampila at iki.fi> Date: Wed Oct 17

libswfdec/swfdec_as_strings.c | 2 libswfdec/swfdec_text_field.c | 66 +++++++++++++++++++++++----- libswfdec/swfdec_text_field_movie.c | 5 +- libswfdec/swfdec_text_field_movie_as.c | 77 ++++++++++++++++++++++++++++++--- 4 files changed, 132 insertions(+), 18 deletions(-) New commits: commit a165608df6751cf46561b570db61ff309f5b7244 Author: Pekka Lampila

http://bugs.freedesktop.org/show_bug.cgi?id=13293 Summary: _cairo_pen_find_active_cw_vertex_index failed assertion Product: swfdec Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: library AssignedTo: swfdec at lists.freedesktop.org

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

I've been having problems with incoming IAX2 calls - some work, but a large fraction are answered with "dead air" or disconnects from my IAX provider. Disabling the jitterbuffer seems to eliminate the problem (so far)! Has anyone else seen this? I'm using 1.2.6, but I'm not sure what my provider is using. A snippet of the a failed incoming call IAX2 debug is attached

Hi All, While trying to put together an MC-based assembler the other day, I again encountered MC's non-obvious memory ownership rules. The most egregious example of these is MCObjectStreamer's destructor: MCObjectStreamer::~MCObjectStreamer() { delete &Assembler->getBackend(); delete &Assembler->getEmitter(); delete &Assembler->getWriter(); delete Assembler;

Hi, I'm testing an upgrade from 1.4.18 to 1.4.37 in a VM prior to putting it into production. Ive done this by installing 1.4.18 onto the VM, putting my config files in place and then installing 1.4.37 over the top (which is what I'd have to do on production). I've found a few issues in the config files, but nothing I couldn't handle until... I hit inbound IAX issues. My

http://bugs.freedesktop.org/show_bug.cgi?id=16395 Summary: glib abort for "double free or corruption" in jpeg code Product: swfdec Version: git Platform: Other URL: http://speed.pointroll.com/PointRoll/Media/Banners/Veriz on/581557/728x90_Initial_11_14_AtomFilms_113007.swf?PRAd

This may not strictly be an asterisk question, but not sure where else to post ... I have an Asterisk test server setup with two firefly clients, one on the local lan and one on an external ip address. Both clients are setup the same way and voice calls work fine. The asterisk console reports a "Registered" message for the external client at about one minute intervals but the

The situation is one of my asterisk servers is behind a NAT firewall and one is not. Both servers have multiple IAX peers. The NAT firewall has port 4569 mapped through to the asterisk server behind. But, the natted server is almost permanently unreachable from this non-natted server, even though, the non-natted server is almost permanently _reachable_ from the natted server. Details are below

To answer my own message, I figured out a solution (untested) about 10 minutes after posting and leaving the office. Doh! Anyway, the solution (now tested) was to make the Asterisk server behind the NAT register with its peers. Despite reserving port 4569 in the firewall, that was not enough in this particular NAT firewall - it was only being reserved for one connection. Kind regards, Sebastian

I've turned on debug in a (IAXComm based) soft phone. I see the phone sending pings to *. I see * getting the pings. For some reason, with iax2 show debug, I never see any response on the console from *. However, the phone shows a response with INVAL. Seems like an odd response to a ping request. I believed it should get an ACK. Is that wrong? If I should get an ACK, what could I have messed

Hi everyone, It seems variable arguments is not support by mips backend in llvm-2.6. int func(int i, ...) { return 0; } llvm-gcc func.c -emit-llvm -c -O3 -o func.bc llc func.bc -relocation-model=static -march=mips -O0 -o func.s Command llc fails: llc:SelectionDAGBuilder.cpp:6440:void llvm::SelectionDAGISel::LowerArguments( llvm::BasicBlock):Assertion 'Invals.size() ==

I have an issue where * tries to route a call over IAX to another server even if the server is down. I have included the relevant entries from my iax.conf, extensions.conf, and some debug output. If someone could tell me what I have configured incorrectly, I would appreciate it. Thanks, Stephen -----------iax.conf on voip2---------- [voip1] type=friend username=voip1 host=x.x.x.x (ip