search for: inteligentes

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

Hi guys , i am starting to "play" with qos in linux. Well , i am trying to setup an ingress filter but i do not know why it is not working. tc add qdisc dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip prio 1 handle 1 fw police rate 160kbit burst 256kbit drop flowid :1 After that : iptables -A PREROUTING -t mangle --sport 80 -j MARK --set-mark 1 So , i think this

After starting to shape local traffic now i am getting a lot of kernel panics in tcp_retransmit, so i decided to update my kernel from 2.6.17.14 to 2.6.21.1 , the problem is that after that i get: # iptables -t mangle -A POSTROUTING -o eth0 -j IMQ --todev 0 iptables: No chain/target/match by that name so i can not redirect ttraffic to IMQ device. and modules are loaded. - # lsmod Module

Hi guys, i have a little doubt ; I have eth0 ethernet and eth1 wireless , and they are bridged in br0 Is there any difference in the behavior between do tc qdisc add dev br0 root sfq OR tc qdisc add dev eth0 root sfq && tc qdisc add dev eth1 root sfq -- []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o

Hi, i am trying to migrate my print servers from windows to linux , everything is getting really nice but i still face a few problems , and since i don't know if i need help from cups or samba guys i will post to both lists, so maybe someone can give me some help. Well, i have now cups and samba working just fine, i can authenticate my users in cups from Active Directory using winbind and

i am trying to do some traffic classification using the PRIO qdisc and i am having a few problems. I have a root htb class: tc qdisc add dev imq0 root handle 1: htb default 255 r2q 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 768kbit and a child PRIO tc class add dev imq0 parent 1:1 classid 1:99 htb rate 96kbit ceil 600kbit prio 0 tc qdisc add dev imq0 parent 1:99 prio tc filter

How can i redirect all traffic that not come from port 80 to a flow ? i was thing about some like tc filter add dev imq1 parent 1: protocol ip prio 7 u32 match ip sport !80 ...... But this not work. Another doubt, if i have two rules that intersects , for example , one filter with u32 match ip src 10.10.10.10 flowid 1:10 and other with u32 match sport 80 0xffff flowid 1:11 , which one will

I have a mixture network with WinXP machines and IRIX (UNIX of Silicon Graphics) machines. In the machine with IRIX (O2) there was an old version of samba. It worked well. But recently I've downloaded. I installed this new version, and I spoiled the system. Now I don't know if I have to reconfigure the smb.conf only or if I have to install more pakages or if I have to reconfigure several

Si no puedes pulsar los enlaces, pulsa ??Mostrar el contenido?? e int?ntalo de nuevo. Correo-electr?nico enviado el 10/22/2010 4:53:03 PM, por Adri?n Furlan: Buenos d?as, ?Por fin un sistema inteligente y sencillo para administrar sus contactos! Con UNYK, he reunido todos mis contactos en una sola libreta de direcciones, que se actualiza autom?ticamente. Uno de mis contactos modifica sus

Saludos, tengo una base de datos con tres variables: especie, tratamiento y abundancia. Quiero hacer comparaciones múltiples con Tukey. Ya había usado el comando TukeyHSD(aov(x~y)). La cuestión esque ahora tengo varios niveles del factor especie y varios niveles del factor tratamiento. Si hago TukeyHSD(aov(abundancia~especie:tratamiento)) me salen todas las comparaciones posibles, pero yo sólo

Attaching WRR to a hfsc ot htb class after a while i will get all packets drop and syslog full of HFSC or HTB : Non-work-conserving qdisc any ideas ? -- []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o inteligente".

Hi , i am trying to add a driver to windows using the smbclient and rpc commands [got those from cupsaddsmb -v commands] and i am getting : smbclient //localhost/print$ -U $PASS -N -c ' mkdir W32X86;put GENERIC.ppd W32X86/GENERIC.ppd;put /usr/share/cups/drivers/ps5ui.dll W32X86/ps5ui.dll;put /usr/share/cups/drivers/pscript.hlp W32X86/pscript.hlp;put /usr/share/cups/drivers/pscript.ntf

Hello, I'm trying to setup my wireless on FreeBSD 9.0-p3 amd64 and i get the following error: wpi0: fatal firmware error pciconf -lv: wpi0@pci0:3:0:0: class=0x028000 card=0x10518086 chip=0x42228086 rev=0x02 hdr=0x0 0 vendor = 'Intel Corporation' device = 'PRO/Wireless 3945ABG [Golan] Network Connection' class = network Detected as: wpi0:

Could anyone explain what is WRR param2 [wmode2 , incr2 , decr2 , min2] for ? can i set just the param1 ? [wmode1 , incr1 , decr1,min1] -- []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o inteligente".

Ok , let`s go again with shaping a bridge interface. The environment is a dd-wrt firmware router. I have vlan1 interface connected to the DSL modem , and a br0 interface connecting wired and wireless machines. lets begin with the doubts , I have [example]: tc qdisc add dev br0 root handle 1: htb default 999 tc class add dev br0 parent 1: classid 1:999 htb rate 16kbit ceil 16kbit well , all

Hi , i am trying to understand how RED queue discipline works but i am having a few troubles. The parameters are MIN , MAX , LIMIT , BURST I put LIMIT = 64Kb, so if i am not wrong it should PDROP anything over this value , right ? i put MIN = 8Kb , so no drops at all below this value, right ? i put MAX = 16Kb, starts to early drop anything above this using probability P. I put probability at

Hi, does already Etheora support sound? Bye Javi ______________________________________________ Enviado desde Correo Yahoo! La bandeja de entrada m?s inteligente. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/theora/attachments/20080703/57d522fe/attachment.htm

...0> channel=2 ---- extensions.conf ---- [dialout] ignorepat => 9 exten => _9.,1,Dial(${PSTN}/${EXTEN:1},120,T) exten => 9,1,Dial(Zap/g1/) exten => 9,2,Congestion Thanks. -------------------------- Alvaro I. Parres Peredo Director de IT Xmarts, Soluciones Inteligentes Bernardo de Balbuena #35 Tel: 36301294 http://www.xmarts.com ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/

Alguien puede decirme si existe un maximo de columnas para unir en un dataframe? -- La verdadera Locura quizá no sea otra cosa que la sabiduría misma que, cansada de descubrir las vergüenzas del mundo, ha tomado la inteligente resolución de volverse loca. (Enrique Heine) [[alternative HTML version deleted]]