search for: infront

Hi R Community: I've got a character string that looks like: New Mexico How to I create the new character string that looks like: "New Mexico" That is, it is the original string (New Mexico) with double quotes infront and behind it? Thanks, Phil Smith

Grandstream v1.0.4.68 firmware http://www.hellofone.com/downloads.html Seems to have loaded ok on my BT100.. -- Best regards, Duane http://www.cacert.org - Free Security Certificates http://www.nodedb.com - Think globally, network locally http://www.sydneywireless.com - Telecommunications Freedom http://happysnapper.com.au - Sell your photos over the net! http://e164.org - Using Enum.164 to

...amme/matrixData6.txt") y Result: A.Paar B.Paar C.Paar D.Paar E.Paar A 1 3 5 7 9 B 2 4 6 8 10 If you look into the txt-file you can recognize that the column names are not the same. Why? If I add in the txt-file the line "MyData:" infront of all followed by a newline. The R-command as above response an error. How can I read the modified input and get the following result: MyData: A.Paar B.Paar C.Paar D.Paar E.Paar A 1 3 5 7 9 B 2 4 6 8 10 Another stupid question might be hows ca...

I want to replace a custom PBX, that is infront on a IVR system based on OLD NMS AG-E1 Card. The Cards is configurated with CAS Digitalmode, someone can give me some info about Digim Cards CAS configuration i need a conversion Table? I wanto to don't touch configuration on winbox, i want only replace HWPBX box with asterisk. Diagram Te...

Hi, 1) I have noticed that when I use the aggregate function it outputs numbers in the results. for example: aggregate by product group.1 Aggregate 1 ProductA 1000400.00 2 ProductB 23232323.00 3 Missing 232323.00 is there a way to suppress the numbers infront of aggregate outputs. I checked and they don't look like columns when I do a summary so I can't -1 them away. 2) is there an easy way to then take my aggregate matrix and then format the sum wtih $ and commas. for e.g instead 10000 it should show $10,000.00? I am trying to create a repor...

...new file where each line shouldlook like: "0.4 mean(0.4.dat) var(0.4.dat)" and so on. Right now I got a a simple script that makes me unhappy: 1. I run it by "R --no-save < script.r > out.dat" unfortunately out.dat has all the original commands in it and a "[1]" infront of every output 2. I would love to have a variable running through 0.4, 0.5, ... naming the datafile to process and the first column in the output. My script looks like: data <- read.table("0.4.dat"); E <- data$V1[1000:length(data$V1)]; c(0.4, mean(E), var(E)); data <- read.ta...

...... ( <--- this line is generated by the shell script) building file list ... done wrote 387 bytes read 20 bytes 814.00 bytes/sec total size is 42133 speedup is 103.52 etc., etc. I'm wondering if there's a way to format that data somehow. Really all I want to do is insert a tab infront of each RSYNC generated line. So the formatting with the rest of the script output is a bit nicer to read. Is this possible...somehow? -- W | I haven't lost my mind; it's backed up on tape somewhere. +-------------------------------------------------------------------- Ashley M. K...

...nnoying on the SIP end of things .. the echo seems to be about 0.3 seconds delayed to the speech .. there is no echo on incoming voice, just an echo of my own voice as I speak. 2nd question: using a grandstream phone & asterisk, if I hear another phone ringing, how can answer it from the phone infront of me? eg. if extension 6003 is ringing, and i have phone number 6004, how can I answer it ? 3rd question: can someone give me some "starter hints" to configure call parking ? I haven't managed to find a direct way to transfer a call from phone to phone except using blind transfer an...

...yboard backlight was an issue initially under CentOS6, but the kind folks at elrepo found the missing bits in a more recent kernel and created a package to add them to the older CentOS6 kernel. An upgrade to CentOS7 went without a hitch and the keyboard lighting has worked fine. Recently I sat infront of the machine and couldn't see the keys - no backlight. A number of reboots later I have found that the latest kernel that I have on the machine, that works okay is 3.10.0-862.14.4.el7.x86_64 3.10.0-957.21.2.el7 and 3.10.0-957.27.2.el7 both fail to load/activate the driver for the keyboar...

...ed can access the inbound/outbound pstn connections from both systems. Thats excellent - it works a treat! But my problem is with Caller ID. When I call from *1 to the new system the extension caller id's are correct. But when I call in the other direction I always get a leading '0' infront of the extension number.. ie 03003. I've almost googled myself insane searching for an answer & would really appreciate any suggestions anyone may have. Many Thanks

guys, i am trying to install HAproxy infront of my webserver. usually my webserver listens on port 80 and since we have 5 ip address serving 5 different sites on the same physical server the webserver listens to all these ips and proxy the traffic to the relavent app servers. now the problem is if want to loadbalance i should install HAproxy...

...-20d14fl6n65t0o-0u03 at 34.221.174.202> I have tried a lot of changes to get to this but nothing works. I am getting this From: sip:109643183 at xaccel.net;tag=42e4a9cb-59af-4d40-a21f-00261afbd3be To: sip:34.221.174.202 I need to put "TEST" <sip:5tf2f2s0rbtdj-20d14fl6n65t0o-0u03@ infront of the ip address. ? Another question... how to set a=rtcp-fb Does asterisk support this ? Any help is much appreciated. PJSIP config. [test01] type=aor contact=sip:34.221.174.202:15033 [test01] type = endpoint transport=transport-tls ice_support = yes allow=!all,ulaw,h264 sdp_session=xacce...

Dear All, when I'm running a PCA with prcomp(USArrests, scale = TRUE) I get the right principal components, but with the wrong sign infront Rotation: PC1 PC2 PC3 PC4 Murder 0.5358995 -0.4181809 0.3412327 0.64922780 Assault 0.5831836 -0.1879856 0.2681484 -0.74340748 UrbanPop 0.2781909 0.8728062 0.3780158 0.13387773 Rape 0.5434321 0.1673186 -0.8177779 0.08902432 instead of PC1 PC2 PC3 PC4 Murder -0.5358995 0.4181809 -0.3412327 0.64922...

...a VLA in the form from my example would consume stack space in proportion to the sum of all values of i, rather than in proportion to the maximum value of i. > > David The 'scope'in should be related to the block in IR - not? This would then be easy: just insert a stackSafe right infront of the alloca (as you suggested) and a restore at the end of the block... Alex

I am having problem while having asterisk work with ODBC (Postgres) The error that I am getting is "config.c: Realtime mapping for 'sippeers' found to engine 'odbc', but the engine is not available" I really donot know what has went wrong. I have set the ODBC connection properly I have verified it using :: [root@asterisk ~]# echo "select 1 " | isql asterisk

Hi. Several OSes have a getpgrp() function that takes an argument, unlike what POSIX mandates. NeXT was covered, but SunOS wasn't. This provides a generic solution through autoconf. Charles ======================================================================== --- configure.in.orig-2.2.0p1 Wed Aug 30 18:20:05 2000 +++ configure.in Tue Sep 5 10:48:20 2000 @@ -284,6 +284,8 @@ ) fi

...ed or created (not sure exactly how this work). Does Cart.new mean that it goes into the model Cart and creates a new item? Does this also mean that the initialize method inside the Cart model is run? Also, the line product = Product.find(params[:id]) How come they arn''t using an @ sign infront of the product? What are the mechanics of the line @cart.add_product(product)? The line @cart.items, is the items referring to the line attr_reader :items? When is the initialize method in the model used? Any help on this topic would be greatly appreciated! Thanks in advance! -- Posted via...

http://www.realvnc.com/products/enterprise/4.1/ipv6.html IPv6 support in VNC Server E4.1.7/P4.1.2 VNC Server E4.1.7 & P4.1.2 are fully IPv6-aware, but is shipped with IPv6 support disabled by default, for security reasons. IPv6 can be enabled by setting "InTransports=IPv6,IPv4" (the default being IPv4 only), either on the command-line when starting vncserver under Unix Ok.

...s, nothing suspicious. I did "yum update" recently. I went to Datacenter and waited before the monitor but during reboot I did not see anything strange. I guess reboot is cold reboot. I changed all system and cpu fans. Upgraded system powersupply with a more powerful one. Placed server infront of air-conditioner. Do you have any idea? Thanks.

Hello list, before to lost my time, I'd like know if someone have a WebRTC working configuration on Asterisk 13.11.0 SIP or PJSIP channel. Thank you Regards