search for: ilos

Dear All, Currently i am using HP x6600 Server and I have installed RHEL4 Update 4 AS Linux and RHEL4 Update 4 Support Cluster Suite in my server I am new in fence and can any one help me how to configure HP ILO fence in my server and HP ILO Fence Functionality Regards -S.Balaji

Hello, Has anyone managed to redirect output of kickstart install to ILO serial console? I have to test and deploy the remote install with kickstart but have trouble debugging it because I can't see the output. -- Jure Pe?ar http://jure.pecar.org

I am writing a hp ilo module to automatically assign a static ip that is derived from the IP of the system which is fed in via facter. I basically just need to change the network the ilo is connected to. The ruby code works great inside the irb console. However, puppet doesn''t seem to be able to use the variable I have derived from the ipaddress. This is my first template so I am not

Hello, Recently, the FreeBSD base system OpenSSH was upgraded to OpenSSH_5.1p1 FreeBSD-20080901, OpenSSL 0.9.8e 23 Feb 2007 Before the upgrade, with OpenSSH_4.5p1 FreeBSD-20061110, OpenSSL 0.9.7e-p1 25 Oct 2004 I had no troubles connecting to the ssh server built-in into the HP Proliant G5 ILO management board, authenticating by id_dsa, v2 protocol. On that board, ssh server greets with

On Fri, 10 Mar 2006, Herta Van den Eynde wrote: > I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4. > Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the > BIOS. > As soon as the installation starts, i.e. even before you get to the point > where you can enter "boot" and whatever boot options you want to use, the

Due to an issue I'm having with 7.x, and trying to track it down, I spent tonight getting my server setup to allow my to break into the debugger when it hangs, and hopefully dump core ... But, although I *think* I've got it all, I'm obviously missing something, as it isn't breaking ... First ... I'm running a proliant server, and when I connect via SSH to ILO on that

Hey, Does anyone know how I can capture both Xen & Dom0 console output on a "Virtual Serial Port" from HP''s iLO (Integrated Lights-Out) interface? Plain linux is no problem, but combined with Xen it seems to go haywire :-) So far I''ve been combining options and the only thing that actually gave me some output (albeit only the Xen console, not dom0) was this:

Hi, On Fri, Mar 27, 2015 at 02:36:50PM +0100, Hubert Kario wrote: > > Same thing with needing sshv1 to access old network gear where even sshv1 > > was an achievement. "Throw away gear that does its job perfectly well, > > but has no sshv2 for *management*" or "keep around an ssh v1 capable > > client"? > > If you depend on hardware like this,

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP

Just a note to pass on in case anyone runs into the same situation. I have a DELL R510 that is running just fine, up until the day that I needed to import a pool from a USB hard drive. I plug in the disk, check it with rmformat and try to import the zpool. And it sits there for practically forever, not responding. The machine still responds to network connections etc., it''s just the

Hi everyone, We are recently seeing a problem with OpenSSH 5.8p1 and SSH to ILO cards running SSH-2.0-mpSSH_0.1.0. This has previously worked with OpenSSH 5.5p1 (last known version for us to work). ssh ilohost -vvv gives the following on 5.8p1: debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Applying options for *.* debug2: ssh_connect: needpriv 0

This CAP will determine whether ARB_framebuffer_object can be enabled. The nv30 driver does not allow mixing swizzled and linear zsbuf/cbuf textures. Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- src/gallium/docs/source/screen.rst | 3 +++ src/gallium/drivers/freedreno/freedreno_screen.c | 1 + src/gallium/drivers/i915/i915_screen.c | 1 +

For the series: Reviewed-by: Marek Ol??k <marek.olsak at amd.com> Marek On Sun, Oct 13, 2013 at 3:43 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: > ping > > On Fri, Oct 4, 2013 at 4:32 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: >> This CAP will determine whether ARB_framebuffer_object can be enabled. >> The nv30 driver does not allow mixing

Hi OK another issue trying to get X going on these boxes. It seems to be a HP issue but if anyone knows a solution that would be great. I am using the iLo interface and the hpmouse-1.1.0-73.noarch.rpm driver. As root i can startx and all is well, however when starting X as the oracle user it fails with the following error Exec fail for command "/opt/hp/hpmouse/hpmouse-helper"

I've got two DL385s and a DL320, and they all rock. iLO especially rocks, but to leverage the full functionality, you'll need to get the "Advanced License", which opens up full blown remote console capabilities (via Java). It's a separate piece of hardware that, as long as the server PSUs have power flowing into them, lets you do things like remotely power on/off/reset the

Hi , I think the question has been asked before ... but I need to be adviced on what would be the best way to import microsoft PST's into Dovecot.. ? What software can I use.. can a anyone make any recommendations? even if one has to spend some money on some commecial software.. but it has to work.. so Im looking for someone who has tried from experience as ive tried some freeware or trial

Hello all, I have set up a samba4 server with bind9 and the bind_dlz module. Everything is working as it should but now I need to allow the dhcp server to add entries to the forwarding zone. Has anybody implemented such a configuration ? Can this be done with the kerberos DNS dynamic update configuration. I want to achieve the following: 1) allow non-Windows machines (printers, ILO ...) to be

On Wed, Jun 22, 2016 at 11:08 AM, Barak Korren <bkorren at redhat.com> wrote: > > > > My question is: Is this even possible? All the documentation for HA that > I've found appears to not > > do this. Am I missing something? > > You can use oVirt for that (www.ovirt.org). > When an UNCLEAN SHUDWON happens or ifdown eth0 in node1 , can OVIRT migrate VMs

ping On Fri, Oct 4, 2013 at 4:32 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: > This CAP will determine whether ARB_framebuffer_object can be enabled. > The nv30 driver does not allow mixing swizzled and linear zsbuf/cbuf > textures. > > Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> > --- > src/gallium/docs/source/screen.rst | 3 +++ >

Thanks, Marek. Could someone with commit access pick this up? Let me know if you'd like me to reformat/resend/create a git tree/whatever. -ilia On Sun, Oct 13, 2013 at 9:16 AM, Marek Ol??k <maraeo at gmail.com> wrote: > For the series: > > Reviewed-by: Marek Ol??k <marek.olsak at amd.com> > > Marek > > On Sun, Oct 13, 2013 at 3:43 AM, Ilia Mirkin