search for: idevicechemistri

It's been a while since I tried to use NUT, so I thought I would give it another try. Big trouble. The UPS is a Tripp-Lite AVR 550U. It has only a USB connector. The computer is running Red Hat Enterprise Linux 4. I just installed NUT version 2.2.0. I'm going through the steps in the INSTALL document. # cat ups.conf [igor] driver = usbhid-ups port = auto

Alex and the list, Alexey Morozov (Powercom sales manager for Russia) has contacted me to propose demo units and information on the new Powercom protocol. This is preferably for a Russian team member... Anyone up? cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Alex and the list, Alexey Morozov (Powercom sales manager for Russia) has contacted me to propose demo units and information on the new Powercom protocol. This is preferably for a Russian team member... Anyone up? cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hello everyone! If this message was posted twice, my apologies. I'm having issues with my webmail today... I am using the testing version of NUT from SVN at changeset 582. I have successfully created a stub for newhidups driver for my Dynex DX-800U UPS, but I am completely lost on the customization of it. I've followed the hid-subdrivers.txt instructions and I understand I need to

Hi Peter, I got all your patches and applied them, and I wanted to say kudos for a great job done. This is the output of upsc that I'm getting right now. I had the same issue when using any cvs version (from two weeks ago) that made my UPS go into a state where it wasn't functioning normally (checking the kernel log shows that it cannot be connected and I had around a page of DEVFS_USB

Hi UPS List members, I have purchased a number of Emerson Power / Liebert GXT4 UPS units. I have these working correctly under nut, but limited detsils are being reported. I am happy to supply information on the USB communications to improve the reported details I can use WireShark to capture the comms between the supplied Windows GUI tool and the UPS Please advise the best way I can

Hi all, I have an APC/Smart-UPS 3000 RM that I am trying to connect to nut via the usb port. I have nut running just fine on several other machines using APC ups's via the serial ports but this usb thing is making me crazy. If I do a "/sbin/newhidups -u root -D -a PS1" it recgonizes the ups and dumps a bunch of information like below: (porky pts12) # /sbin/newhidups -u root -D -D

Thanks again for your patience. I'm still learning how to deal with systemctl myself (and starting from, I'm sure, a much lower level of understanding), so if I've neglected to restart or start something, please let me know. I made the change to /etc/nut/upsd.conf. I restarted upsdrvctl, which reported back: Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic

This took a long time because I had problems with my system. After I reloaded my operating system several times I found I had a bad memory module. Here is the output from newhidups for my Geek Squad GS1285U. It just kept repeating until I hit ctl-z. I think that this means nut will work for this ups. My computer is not powered by the ups yet. I did not want it to be powered down by accident.

Hi - I just installed NUT from source, using the usbhid-ups driver for a tripplite UPS (i compiled with the appropriate flag for the USB device). NUT version is 2.7.3. I UPS is AVR900U System is archlinux - fully up to date, running on an ARM device. Linux <Systemnameomitted > 3.1.10-35-ARCH #1 PREEMPT Fri Jan 23 19:14:18 MST 2015 armv5tel GNU/Linux I can communicate with my UPS - no

Hi Guys Having trouble getting my LiebertPSP UPS to work. $ upsc upsname battery.charge.low: 38 battery.charge.warning: 38 battery.type: PbAc device.mfr: Emerson Network Power device.model: LiebertPSP device.serial: device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.vendorid: 10af driver.version:

I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own /lib/systemd/system-shutdown/nutshutdown, but now everything is working except for powering on and off the UPS. Regardless of the settings of offdelay and ondelay in upsconf, and regardless of whether the AC power is on, when I say "upsdrvctl shutdown" the UPS

On Mon, Jun 8, 2015 at 11:20 PM, Charles Lepple <clepple at gmail.com> wrote: > On Jun 8, 2015, at 8:23 PM, Greg Hersch <hersch.greg at gmail.com> wrote: > >> Hi Charles. I patched, reconfigured, remake'd, remake install'd - but >> no change. however, some more likely helpful information below for >> you. Thank you > > Odd. Are you sure that the

I've searched the listserv archive, to no avail, so I hope I'm not duplicating a previous problem. I am anxious to get this working, so I'm open to uninstalling what I have and starting over. One note which may not be meaningful is that this UPS pre-dates the Raspberry Pi I've got connected to it, and I used to use it with the CyberPower software, which requires logging in with a

On Jun 10, 2019, at 2:32 PM, Marc Finns wrote: > > Hello, I read all FAQ and other sources but I could not find this situation, so I thought of asking the experts. > I successfully configured a Raspberry NUT server to control my UPS that powers several devices (NUC with ESXI VMs, Synology NAS etc). > All works well in principle, but I have the following behaviours that I could not

On Jun 8, 2015, at 8:23 PM, Greg Hersch <hersch.greg at gmail.com> wrote: > Hi Charles. I patched, reconfigured, remake'd, remake install'd - but > no change. however, some more likely helpful information below for > you. Thank you Odd. Are you sure that the new version of usbhid-ups got installed to the same path you are running? Also, there is no protection against

When running 'sudo upsmon -c fsd' UPS turns off then back on after a delay as expected. But when power is disconnected and the command is ran, the UPS turns off but still turns back on again. Changing 'ondelay' to -1 or 0 does not change the behavior. How can I get the UPS load to stay turned off if there is no power? Or am I misunderstanding how to test this functionality?

I recently purchased a CyberPower CP1500PFCLCD UPS as a replacement UPS for a headless server running Slackware 14.1 with the 3.10.7 kernel. I then downloaded the NUT 2.7.1 tarball on the server and following the directions installed the software. The installation went well and the UPS will shutdown the server using the forced down test and then it powers back up as it should. The

Thanks for your help. From: Charles Lepple <clepple at gmail.com> Date: Mon, 18 Dec 2017 19:26:56 -0500 This may sound like an apples-to-oranges comparison, but we did uncover an issue with CyberPower UPSes where the delay values needed to be greater than or equal to 60 (seconds), since they were being rounded down to integer numbers of minutes internally: What was the largest

Thanks for the reply. However these two FAQ are unfortunately not describing the situation. - The first issue is that NUT switches off the UPS upon reboot on low battery (not that it dies because of low battery) - The second issue is that the UPS does not recognise being online again (not that the PC does not restart) Sent from my iPhone > On 11 Jun 2019, at 02:03, Charles Lepple <clepple