search for: ide3

...CentOS 2.1 on SATA drive that lives on ICH7R controller. I have the controller setup in BIOS to "compatibility" mode, which means it should look just like regular IDE controller to the OS. In this mode, ide0 and ide1 are PATA controllers, and 4 SATA ports are mapped to ide2 and ide3. If I boot from the 2.1 installation CD, all the drives are detected (CD-ROM as hda, and four SATA drives as hde, hdf, hdg, and hdh, just as expecte per above mappings). It detect IRQ for ide2/3 right away, and says it will probe for IRQ for ide0 later. Well, it hangs just after it probe...

Hi, I am running RH 9.0 with Grub. I just added an additional "old" drive from another system which has Win98 (fat32) and RH 7.2 (ext2) installed. However, now when I boot up, I am getting the following errors: ext3: No journal on filesystem ide3(34,7) mount: error 22 mounting ext3 pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2 umount /initrd/proc failed: 2 Freeing unused kernel memory: 132k freed Kernel panic: No init found. Try passing init= option to kernel My assumption is that ext3 doesn't recognize the partitions on th...

...0000:00:11.0 > PCI: Found IRQ 10 for device 0000:00:11.0 > PDC20265: chipset revision 2 > PDC20265: 100% native mode on irq 10 > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary > PCI Mode. > ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio > Probing IDE interface ide2... > hde: Maxtor 6Y080L0, ATA DISK drive > ide2 at 0x9400-0x9407,0x9002 on irq 10 > > It''s a known problem? There''s a patch somewhere? You''ll need to enable the pdc202x...

...this box but I have been running a backported kernel to get usb working better. The backported kernel has this ext3 driver: Linux version 2.4.26-1-386 (tretkowski at rollcage) (gcc version 2.95.4 20011002 (Deb ian prerelease)) #1 Fri Aug 20 16:36:09 CEST 2004 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,65), internal journal However, at one point I forgot to pick the correct kernel at boot time and I ran the standard woody kernel instead which has this ext3 driver: Linux version 2.4.18-bf2.4 (root at zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 EX...

...the harddisk was detected as /dev/sdaX But strangely, when I first reboot my machine. The harddisk change to /dev/hdaX What is the problem ? Below are some of dmesg output hda: WDC WD1200JD-00HBB0, ATA DISK drive Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 > ide-flop...

...r on PCI bus 00 dev 70 Apr 22 08:51:10 aurora kernel: HPT370: chipset revision 3 Apr 22 08:51:10 aurora kernel: HPT370: not 100%% native mode: will probe irqs later Apr 22 08:51:10 aurora kernel: ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:DMA, hdf:pio Apr 22 08:51:10 aurora kernel: ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:DMA, hdh:pio Apr 22 08:51:10 aurora kernel: hda: C/H/S=36798/16/255 from BIOS ignored Apr 22 08:51:10 aurora kernel: hda: IBM-DTLA-307075, ATA DISK drive Apr 22 08:51:10 aurora kernel: hdb: IBM-DTLA-307045, ATA DISK drive Apr 22 08:51:10 aurora kernel:...

...00-d4ff : 8139too d800-d807 : Triones Technologies, Inc. HPT366 / HPT370 dc00-dc03 : Triones Technologies, Inc. HPT366 / HPT370 e000-e0ff : Triones Technologies, Inc. HPT366 / HPT370 e000-e007 : ide2 e010-e0ff : HPT366 e400-e407 : Triones Technologies, Inc. HPT366 / HPT370 (#2) e400-e407 : ide3 e800-e803 : Triones Technologies, Inc. HPT366 / HPT370 (#2) e802-e802 : ide3 ec00-ecff : Triones Technologies, Inc. HPT366 / HPT370 (#2) ec00-ec07 : ide3 ec10-ecff : HPT366 f000-f00f : Intel Corp. 82371AB PIIX4 IDE f000-f007 : ide0 f008-f00f : ide1 linux:~ # cat /proc/iomem 00000000...

I am using the following simple menu and have noticed that items at the bottom are dropping off. I seem to be limited to 12 items. Is there a limit to how many items can be on the simple menu? default pxelinux.cfg/menu.c32 prompt 0 MENU TITLE UWSP PXE Boot Menu # TIMEOUT 200 LABEL bartpe MENU LABEL Build 12 KERNEL /STARTROM.0 APPEND keeppxe LABEL 11dnet MENU LABEL Build 11DNET beta

...1 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 10: 0 0 IO-APIC-level usb-ohci 15: 19 3 IO-APIC-edge ide1 ----> 18: 260753631 260932719 IO-APIC-level tor2 20: 815258 827358 IO-APIC-level ide2, ide3 24: 4 8 IO-APIC-level mvSata 27: 836366 849040 IO-APIC-level eth0 28: 38 39 IO-APIC-level aic7xxx 31: 2429141 2497473 IO-APIC-level eth2 NMI: 0 0 LOC: 52176184 52176197 ERR: 0 MIS: 12...

...ur grub screen appear with selection highlights on Red Hat Linux. Highlight line consisting 'initrd...' and press 'd'. Press 'b' to boot. Because your partition does not have a journal on it, create one with these steps below. - Make sure you remember the device attached to ide3(34,7), it is something like /dev/hdxx. - After login, umount that device. - Create the journal part with command 'tune2fs /dev/hdxx -O has_journal' - remount that device - reboot the machine Good Luck Anis WN

At the risk of angering the crash Gods, my sustem has NOT crashed again since I downgraded the kernel from 2.6.18-1.2239.fc5 to 2.6.18-1.2200.fc5. Given that newfound stability, and my lack of time, I'm going to put on hold any further diagnostics, until the next kernel revision is released. I have submitted a report at bugzilla.redhat.com (bug 218128). (Ah, nuts; accidentally created a

On Monday 14 March 2005 06:29 pm, Mark Williamson wrote: > > I don''t know if this is the right place to post, but I can''t find any > > info about my problem on the net. > > Yes, this is the right place. > > > title Xen2610 > > kernel /boot/xen.gz dom0_mem=131072 console=vga > > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0

...d errno=2. This is not surprising, because modprobe is dynamically linked and is not present yet. isolinux.conf looks contains: default promise label promise kernel linux append root=/dev/scd0 initrd=initrd rw ramdisk_size=65536 init=linuxrc ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2= 0 ide3=0 ide4=0 ide5=0 ide6=0 ide7=0 ide8=0 ide9=0 display message prompt 1 timeout 80 Thanks for pointers Erich THINK P?ntenstrasse 39 8143 Stallikon mailto:erich.titl at think.ch PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16

Hi, First, let me thank you for the excellent documentation and programming work on Syslinux. It has made getting to this point infinitely easier. Unfortunately, I need to request some guidance in troubleshooting a problem I am having using the RedHat installer on their version 7.3, which uses Syslinux as the boot mechanism. A little background: I have an old Micron Powerdigm XsU dual PII

Hello All, I am getting a set of errors when I boot Asterisk that I have not been able to solve. What is causing these error(s)? Asterisk boot output: ============== Asterisk CVS-04/10/04-21:44:51, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= [

...e with idebus=xx Probing IDE interface ide0... hda: Maxtor 6Y060L0, ATA DISK drive hdb: Maxtor 53073H4, ATA DISK drive Probing IDE interface ide1... hdc: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive hdd: SONY CD-RW CRX220E1, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda3 hdb: max request size:...

...ver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST9100822A, ATA DISK drive Probing IDE interface ide1... hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 h...

...ide0... hda: ST36530A, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive hdd: IBM-DTLA-307045, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 12594960 sectors (6448 MB) w/448KiB Cache, CHS=13328/15/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hdd: max request size: 128KiB hdd: 90069840 sectors (46115 MB) w/1916KiB Cache, CHS...

...ver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST9100822A, ATA DISK drive Probing IDE interface ide1... hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 h...

Hi, Apologies, this is going to be quite long - I'm going to provide as much info as possible. I'm running a system with ext3 fs on software RAID. The RAID set-up is as shown below: jlm@nijinsky:~$ cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] read_ahead 1024 sectors md0 : active raid1 hdc1[1] hda1[0] 96256 blocks [2/2] [UU] md5 : active raid1 hdk1[1] hde1[0]