search for: iconnecthere

...hones). Our current phone system is quite a few years old and isn't growing with us (when a single line telephone port is a $600 add-on - you know it's time to change) - so Asterisk will be excellent. Anyway, I'm writing to see if anybody else has experienced problems with calls to the iConnectHere gateway dropping out. I've got the following setup: Anybody wishing to call via iConnectHere dials 82 followed by the number. Calls seem to be connecting fine - voice passes for 5-10 seconds but then the call disconnects. The following shows up in the console: -- Executing Dial("SI...

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the audio comes back fine for the rest...

Is it possible to send the CallerId to IconnectHere with Asterisk when making outbound calls? I read somewhere that it doesn't work. I have set up everything to send the correct CallerId info to IconnectHere but I get a "442-887-926267" caller id. In [globals] ICONNECT1=1713...(my number) MYNAME=My Name I set up the Caller Id in the...

For the past several days I can no longer use iconnecthere with asterisk. It is broken in BOTH directions; I can neither make nor receive calls. On outbound calls I get an immediate error: -- Got SIP response 400 "Bad or Missing To" back from 213.137.73.140 On incoming calls, the call switches through OK, and for a few seconds I get a...

I am going to have to find a fix for this problem or I'm going to have to quit using iconnect. About one call in 10 or so, iconnect's gateway gives me an error (console output appended below). So upon receiving the error, which as a 4XX error means, "Fatal," asterisk gives up and drops the call. But not iconnect!! The phone at the other end starts ringing, and rings

Hi all, I'm working on a setup for a small office. I'd like to use SIP/iconnecthere most of the time, because they're cheap. But they only allow a single call. When the single iconnecthere line is in use, I'd like to use IAX2/voicepulse instead: exten => _1NXXNXXXXXX,1,Dial,SIP/BYEXTENSION@iconnect exten => _1NXXNXXXXXX,2,Dial,IAX2/npI42VoD38@voicepulse/${EXTEN}...

Hi, Anyone having problems receiving DTMF on incoming iConnectHere lines? They disappeared for us sometime in the last 12 hours... And, yes, we've restarted * and rebooted our * machine. Michael Swan Neon Software, Inc.

I've been to the WIKI and I've searched the archives. Is anyone on the list successfully using iconnecthere behind NAT? I was, for over a year, and then I changed my "plan" with them. Now all my calls get intercepted immediately, "We're sorry, but your account is temporarily unavailable." Incoming calls work just fine. I contacted their so-called "customer care," w...

This may be slight off topic, but perhaps it has relevance: My iconnecthere account no longer works for "inbound" calls through NAT using the standard configuration that they provide on their website. I have sent them a message, but I believe it will be flushed down the toilet by the first-tier support people. When I call my iconnect number, it goes directly...

Hi all I am trying to figuure out how to get iconnecthere incoming calls to work outbound works fine but incoming goes nowhere but to my iconnecthere vocemail if I do a sip show registry it shows up as regg'ed nnn=is my iconnect here number xxx is my secret Thank you Jeremy [general] qualify=no register=NNNNNNNNNNN:XXXX@iconnecthere/NNNNNNNNN cont...

Hi All, I can only seem to get iconnecthere working with incoming calls intermittently. One minute it seems to work, and the next it doesn't. I am not aware of anything being changed in the config files. Outgoing calls work ok all the time. The Asterisk box is behind NAT so that does complicate things slightly. However, the Iconnecth...

Hi guys I just registered an incoming number with iconnecthere and I'm trying to set up incoming calls from icconnecthere on my asterisk server. I took a look at john todds sample sip.conf and extensions.conf file but for some reason my incoming is still not working. At this point I wish to use iconnecthere merely for inbound calls. Also my asterisk...

...whether the AVM Fritz card is a "low pain" solution to connecting to a BRI ? I've tried connecting an ASUS card (doesn't work with the available drivers/application) so I'm really asking in order to buy. I only have one BRI - this is at home) so would appreciate any help. iConnectHere >From day one, I was able to create the trunk to dialout of iConnectHere, but despite finding several claimed correct settings for receiving its DID, I've not been able to. When I connect a Grandstream 101 to the line and power it up, it has absolutely no problem receiving calls from that DI...

Ok. I am confused. I now have conflicting answers to my question: Do you need to use a special phone to use SIP? My setup is X100P and TDM10B. I would like to connect to iConnectHere, which uses SIP. Has anybody done this before (using similar equipment to what I have listed above)? And if it is not possible, could somebody please explain why. I don't understand why this wouldn't work. ----[Extra Information]--------------------------------------------------------...

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration f...

...I get frequent errors such as this one, which showed up on the CLI interface within a couple of seconds of a cold start: WARNING[114696]: File chan_sip.c, Line 393 (retrans_pkt): Maximum retries exceeded on call 73015f757661435d247414b104964554@192.168.1.10 for seqno 102 (Request) All calls to iconnecthere terminate immediately with the following error: -- Got SIP response 400 "Bad or Missing To" back from 213.137.73.140 I'm behind a NAT gateway, which seems a continuing problem wrt using iconnect. Thanks. B.

I can't get the callerid feature to work when being passed through iconnecthere. Is it even possible to specify your own callerid using iconnecthere? -sip.conf- ... [iconnect] type=peer username=xxxxxxxx password=xxxx callerid="Jerky McJerkface" <(555) 867 5309> host=213.137.73.178 -extensions.conf- .... exten=>_1NXXNXXXXXX,1,SetCallerId,4168675309 exten=&...

I moved from 0.7 to Stable recently and my dialing out/in from iConnectHere stopped working. I made no changes to my conf files or anything else (other than the upgrade). Now I get a "Unsupported Media" error even though I'm still using ulaw and alaw. It stopped working with my softphone, my Grandstreams, my Snom, etc. Searched the lists for a recent discus...

I wanted to sign up for the pay as you go plan from iconnect anyway, and see they have the Cisco ATA for $99 and the Grandstream phone for $39.00 Anyone know if they ship these devices "locked"? I know iconnect seems pretty friendly about letting any sip device connect. What sucks is there is no way to contact this company if you're not a subscriber.. Zip, notta.. No email

I've been using * CVS code from May of this year and was able to connect to iConnectHere and receive calls with * being behind NAT. Now that I've upgraded to 1.0 RC1, this no longer works. I've tried setting nat=yes in places, externip, et al with no success .. even though the code I was running from back then worked without that. Any suggestions? BTW, I've gotten DTM...