search for: iaxtell

<BLOCKQUOTE style="PADDING-LEFT: 8px; MARGIN-LEFT: 8px; BORDER-LEFT: blue 2px solid"> <DIV>Hello,</DIV> <DIV>&nbsp;can someone tell me what's wrong with this? I can't make toll free calls via iaxtel. Here's the definition in my extensions.conf</DIV> <DIV>&nbsp;</DIV><FONT size=2> <DIV>[iaxtel-trunks]</DIV>

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

I signed up for an IAXTEL account and have been trying, unsuccessfully, to get it working. In IAX.CONF I have: [iaxtel_out] type=peer host=iaxtel.com username=USERNAME secret=SECRET auth=rsa inkeys=iaxtel [iaxtel] type=friend context=incoming host=iaxtel.com auth=rsa inkeys=iaxtel However, when I start Asterisk, I get the following warning: [chan_iax2.so] => (Inter Asterisk eXchange

Hello, I just started using asterisk, and have a question. I have setup two asterisk servers, A and B. A has a Digium TDM400 11B card (1 FXO and 1 FSX modules) and is connected to the PSTN. B has same, but is NOT connected to PSTN. I want to configure B to call A via iaxtel, and connect to the PSTN using A's line. How can I configure iaxtel dial plan for B in extensions.conf? I want to be

I tried putting this as the ata's dailplan: *St4-|#St4-|9|^9t4>$.- this is sip.conf [ata2001] type=friend username=ata2001 secret=SoMeSeCrEt host=dynamic context=fromata canreinvite=no and this in extensions.conf [fromata] ignorepat => 9 exten => _91700NXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel) exten =>

Is anyone other than me having trouble dialing out via IAXTEL? I havn't changed my config files in weeks but seems that IAXTel calls (800 and FWD) stopped working in the past week sometime. Robert

After battling for days trying to figure out what was wrong with my iax.conf it was determined that I do not have any inkeys set on the digium server. Now whether that is something new or just in a few cases I am not sure. Messing around and reading on IRC and the mailing list I could get certain things to work and then break other things. Now I can dial a IAXTEL number, 800 number and FWD

I didn't get any response at all to my last "request for status" on IAXTEL. So, when this happens, I attribute it to one of a number of things: 1. No-one knows. 2. No-one cares. 3. Everyone knows, but are too busy to reply. At any rate, my investigative side kicks in and I began searching thru the digest's I've gotten, looking for references to IAXTEL. Mostly it is

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel")...

I have tried for over a month off and on to get iaxtel for inbound to work... and tonight after alot of troubleshooting we noticed this: iaxtel inbound will use the last entry in your iax.conf to auth against. So if [iaxtel] is at the top and say [voicepulse] at the bottom. An inbound call will try to auth against that [voicepulse] entry even with the [iaxtel] entry at the top of the file. Has

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

Does anyone know if the 1-800 iaxtel gateway is down? I've been trying to use it all day today and asterisk says it's ringing: Channel (Context Extension Pri ) State Appl. Data IAX2[iaxtel]/1 ( s 1 ) Ringing AppDial (Outgoing Line) SIP/2201-a253 (home 18888476626 1 ) Ring Dial IAX2/XXX:YYYY@iaxtel.com/18888476626@iaxtel But I

How do I solve the problem with between patterns: _1800 _1NXX I would like all numbers 1800, 1877 etc to go through iaxtel but all other numbers 1xxx via voipjet Example in my extension.conf I have: [iaxtel] exten => _1700NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten => _1888NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten =>

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

When I try to call iaxtel it goes to codec ADPCM even though I have define in iax.conf gsm Call accepted by 69.73.19.178 (format ADPCM) -- Format for call is ADPCM My settings: [general] port=4569 register => xxxx:xxxx@iaxtel.com bandwidth=high jitterbuffer=no tos=lowdelay [voipjet] type=peer host= xxx.xxx.xxx.xx secret= xxx auth=md5 notransfer=yes context=incoming disallow=all ;

Ok folks I have another question. So far I have gotten my IAXTEL number and I have been able to make calls from my asterisk system to any IAXTEL number and even to FWD numbers. I also got FWD to work and I now can get calls to my main system. It's great when these things work. But when I call my own IAXTEL number 17005441100 all I get is a message saying the user is un registered or un

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the

I've searched WIKI and Archives but nothing. Im getting: -- Called username:password@iaxtel.com/1800somenumber@iaxtel Jun 21 17:04:12 WARNING[1158883520]: chan_iax2.c:5097 socket_read: Call rejected by 69.73.19.178: Unable to negotiate codec -- Hungup 'IAX2[Iaxtel]/8' == No one is available to answer at this time -- Executing Hangup("SIP/104-b8eb", "")

Hi, I've been trying to dial out to a cellphone, but all my calls get redirected to 066 (the emergency number at my city, like 911) does anyone know how to fix this, any ideas,? does anyone from mexico has done this? Any comment will be highly appreciated, Regards, Claudio -------------- next part -------------- An HTML attachment was scrubbed... URL: