search for: hyperterm

Hi all I have a problem switch in our data centre, which is connected to a linux server via a serial cable. I know I can / could access the switch from my Windows PC back at the office, using hyperterm, but trying to access it using minicom just doesn't seem to work. I have changed the comms in minincom to use /dev/tty0 & the baud rate to 9600, yet I can't seem to connect with minicom. Does anyone know how to connect to a serial device from the console? -- Kind Regards Rudi Ahl...

...cat /etc/group | grep hm | grep dialout dialout:x:20:hm hm at m-art:~$ ls -all ./.wine/dosdevices/ | grep tty lrwxrwxrwx 1 hm hm 10 2009-03-21 20:20 com1 -> /dev/ttyS0 ------------------------------------------------------- I don't see com1 device in Wine configuration tool, and windOFFs hyperterm don't show com1 device in list of 'connect using' combo box list. Thanks!

...: the app does not see the data. Even the nice little feature in its configurator which shows the raw input on any of the com ports is completely silent. What could I possibly be missing? Is there any way to troubleshoot those com ports from inside Wine (perhaps by listening to them with, I dunno, Hyperterm or something)? Am I mistaken in the whole concept of linking a USB device to a com port? Any and all suggestions would be highly appreciated; I've lost many, many hours to beating my head against this particular brick wall. -- * Ben Okopnik * Editor-in-Chief, Linux Gazette * http://LinuxGaze...

..., to this server via telnet or ssh over a direct connection. Is there a way to connect / configure a comm port to a raw USB port in windows / centos and to use a direct cable connection between the two? Or, is a usb to serial converter device required at both ends? I expect to use either puTTY or hyperterm as the windows client. What I need to know is: Is this is even possible? How do you configure the tty ports on CentOS for this to work? How do you configure the comm port on MS-WinXPpro? What cable does one require? I have never had this problem before since all our hosts have previously come...

Hello. Trouble to communicate with APC SmartUPS via serial port. UPS connected to the com1 port on windows host. Communication witch hyperterm works well. There is a log: YSM ^ASmart-UPS SC1000 n5S0713T63247 m03/29/07 L240.0 B27.10 apcupsd also can communicate with the UPS and works well. running apcsmart -a ups gives the following: com1: device reports different attributes than what were set unable to detect an APC Smart protocol UPS...

...minal --timeout=10 serial . . kernel /boot/vmlinux-2.6.18-128.el5 ro root=LABEL=/1 console=ttyS0,9600 - - - Still Iam not able to see any console messages redirection on serial port.I have connected the serial port of the Machine_1 which has centos running to Machine_2 where i have opened an hyperterminal.I see no console messages displayed here. Iam , I missing any configuration or is there an rpm i should install ? Thanks and Regards, Premraj M Sr.Software Engineer Tel: +91-080-67274900 Cell: +91-9741231739 Email: premrajm at digilink.in Smartlink Network Systems Ltd. Digil...

On 2014-01-14 10:12, dstrr wrote: > Hello. > Trouble to communicate with APC SmartUPS via serial port. > UPS connected to the com1 port on windows host. > Communication witch hyperterm works well. > There is a log: > > YSM > ^ASmart-UPS SC1000 > n5S0713T63247 > m03/29/07 > L240.0 > B27.10 > > apcupsd also can communicate with the UPS and works well. > > running apcsmart -a ups gives the following: > > com1: device reports different attrib...

...t to a serial port on your PC. Plug the RJ45 \n end into the "console" connection on the 515E. If you don\'t know which one \n that is, look at the diagram at http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/hig63/515.htm#wp1037358 Then \n on your PC, fire up Hyperterm and set it to use the appropriate COM port at \n 9600 8 N 1. Now press return in the Hyperterm window. Alternately, \n follow the instructions in chapter 3 of the Quick Start Guide at http://www.cisco.com/univercd",1] ); //-->http://groups.google.com/group/comp.dcom.sys.cisco/browse_t...

Dear All Please be informed that I checked for the presence of internal modem on my CentOS server , as the followings : #dmesg |grep -i modem #lspci |grep -i modem #lshw |grep -i modem According to the output , it seems that my CentOS client does not contain internal modem . So I decided to add external USB modem and make use of an PCAnyWhere like application that enables for Remote PC Access .

I'm trying to install CentOS SPARC on a Netra T1, but it boots from disk and i want to know how to enter the bios and set up that boots from cdrom. The other problem i have is that when the Netra T1 is booting it gets stuck when makes a NIS request, and says "Time out for NIS to come up". I know this problem doesn't have relation with CentOS but if somebody has installed CentOS

Hi. LG PC Sync can work with ~/.wine/dosdevices/com1 but fails to enumerate com ports. I cannot select port other than COM1 and the combo box that would allow me to do that is blank. I did: # ln -s /dev/ttyACM0 ~/.wine/dosdevices/com5 # sudo chmod g+rw,o+rw /dev/ttyACM0 and added to registry: [HKEY_LOCAL_MACHINE\Hardware\DEVICEMAP\SERIALCOMM] "COM5"="COM5" env

I have been running a Smart-UPS RT 3000 VA using nut successfully over the 940-0095B cable for a couple of years. I have just received a second unit, but it is slightly different in 3 ways that I have found so far. 1. It's a Smart-UPS RT 3000 XL 2. The 940-0095B cable now uses an RJ45 connector at the UPS end. 3. It now requires a baud rate of 9600 instead of the 2400 used previously.

...h cart’s monitor/keyboard/mouse is attached to the video/USB/etc. ports (on the back of the physical box running XEN)? For the network down (out-of-band) emergencies, is there a way to switch amongst domain and/or guest VM consoles once a crash cart ‘terminal’ (i.e. terminal emulator, hyperterm, etc.) is attached to the (primary) serial port on the back (of a physical box running XEN)? I see that any given VM can be configured to map the VM console to the physical serial port I/O – but that would only work for one of the VMs at a time … right? Thanks, Jadean __________...