search for: hx8

...tat_irqs on node -1 [ 14.893919] alloc irq_2_iommu on node -1 [ 14.893927] wctdm24xxp 0000:0e:08.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 16.915156] wctdm24xxp 0000:0e:08.0: Timeout waiting for receive frame. [ 17.924645] wctdm24xxp 0000:0e:08.0: firmware: requesting dahdi-fw-hx8.bin [ 17.953971] wctdm24xxp 0000:0e:08.0: Hx8 firmware version: 2.06 [ 18.840157] wctdm24xxp 0000:0e:08.0: Port 1: Installed -- BRI quad-span module [ 18.943159] wctdm24xxp 0000:0e:08.0: Port 2: Installed -- BRI quad-span module [ 19.047162] wctdm24xxp 0000:0e:08.0: Port 3: Installed -- B...

Hi, I'm facing an issue with which loading wctdm24xxp module fails. Here is relevant dmesg's output : [ 13.455729] dahdi: Telephony Interface Registered on major 196 [ 13.455729] dahdi: Version: 2.4.0 [ 13.510847] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 15.527788] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 17.527787]

...channels / >> 3 ports). >> >> So far the interesting option(s) were Sangoma A500 and Digium B410P... >> (the appliance is adopted from an old desktop that still only ever has >> PCI2.0 slots, >> no PCIE) >> > > I would suggest to also consider Digium Hx8 boards which exist in PCI > format. > > > [1] http://www.digium.com/en/products/telephony-cards/hybrid/h8 > > (there are also OpenVOX's cards, although their installation guide is >> somewhat, well... >> in the old kernel era...) >> >> Anyone who use(...

Hi, please whoever has some expertise in choice of BRI ISDN cards, please restore my faith in community support :) (on private email I can probably explain more than fits for a public forum) Most I'd like to ask is about what to choose, out of what is available... My locality is United Kingdom, lines from British Telecom (BT), but any advice / pointers (I googled around already) are

2017-03-14 15:26 GMT+01:00 Tzafrir Cohen <tzafrir.cohen at xorcom.com>: > On Tue, Mar 14, 2017 at 02:58:07PM +0100, Olivier wrote: > > 2017-03-14 13:08 GMT+01:00 Tzafrir Cohen <tzafrir.cohen at xorcom.com>: > > > > > On Tue, Mar 14, 2017 at 11:10:57AM +0100, Olivier wrote: > > > > Hello, > > > > > > > > After all these years

...coming 'landline' ISDN BRI (6 channels / 3 > ports). > > So far the interesting option(s) were Sangoma A500 and Digium B410P... > (the appliance is adopted from an old desktop that still only ever has > PCI2.0 slots, > no PCIE) > I would suggest to also consider Digium Hx8 boards which exist in PCI format. [1] http://www.digium.com/en/products/telephony-cards/hybrid/h8 (there are also OpenVOX's cards, although their installation guide is > somewhat, well... > in the old kernel era...) > > Anyone who use(d) any of the above, not necessarily on a F...

...the 'forceload' module parameter set to 1 to attempt > recovery. > >> [ 33.544741] ACPI: PCI interrupt for device 0000:01:0b.0 disabled > >> [ 33.544757] wctdm24xxp: probe of 0000:01:0b.0 failed with error -5 > > > > The essential thing here is that your Hx8 board doesn't appear to be > > responding. I've seen certain systems where revision 9397 [1] works > > around cases like what you're seeing. If that doesn't help your best > > bet is to contact Digium technical support for help with troubleshooting. > > &gt...

...RPMs? If not - from where could we download them (as I understand there are several ones)? Please find below some information regarding our machine. Best regards, Ioan. === [tenora1 ~]# rpm -qa | grep dahdi | sort asterisk14-dahdi-1.4.40.1-1_centos5 dahdi-firmware-2.0.2-1_centos5 dahdi-firmware-hx8-2.06-1_centos5 dahdi-firmware-oct6114-064-1.05.01-1_centos5 dahdi-firmware-oct6114-128-1.05.01-1_centos5 dahdi-firmware-tc400m-MR6.12-1_centos5 dahdi-linux-2.4.1.2-1_centos5 dahdi-tools-2.4.0-2_centos5 kmod-dahdi-linux-2.4.1.2-1_centos5.2.6.18_238.9.1.el5 kmod-dahdi-linux-fwload-vpmadt032-2.4.1.2-1...

Hi, On a (bogus) system equiped with a Digium HA8 and 8 BRI ports, I'm reading this: # asterisk -rx "dahdi show status" Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO HA8-0000 RED 109 0 0 CCS AMI YEL 0 db (CSU)/0-133 feet (DSX-1) HA8-0000 UNCONFI 109 0

...t;> span=1,0,0,ccs,ami,term,te >> # termtype: te >> bchan=1-2 >> hardhdlc=3 >> echocanceller=oslec,1-2 >> >> What I should I change in system.conf to configure a span in NT mode ? >> > > It's fairly obvious, and documented in the manual for the Hx8 cards: change > the 'te' in the 'span' line to 'nt'. > Yes, you're absolutely right : it's documented in the user manual (page 55) ! I could I miss this ? Maybe,seeing the word Slave in dahdi_cfg's output that made me think of TE mode and clock coming fro...

...nges. * wctdm24xxp: Fix race conditions/improvements in FXS line feed register handling. (Closes issues #17724 and #17764. Reported and patched by alecdavis) * wctdm24xxp: Added "companding" module parameter to replace "alawoverride". When BRI modules are installed on a Hx8 board alaw is the default companding so change the semantics to just allow the companding to be forced as opposed to overriding a default. The default is "auto" which means alaw if there are BRI modules, otherwise ulaw. * wctdm24xxp: Set 'spantype' for digital spans so t...

...nges. * wctdm24xxp: Fix race conditions/improvements in FXS line feed register handling. (Closes issues #17724 and #17764. Reported and patched by alecdavis) * wctdm24xxp: Added "companding" module parameter to replace "alawoverride". When BRI modules are installed on a Hx8 board alaw is the default companding so change the semantics to just allow the companding to be forced as opposed to overriding a default. The default is "auto" which means alaw if there are BRI modules, otherwise ulaw. * wctdm24xxp: Set 'spantype' for digital spans so t...

On Tue, Mar 21, 2017 at 09:36:21AM +0100, Olivier wrote: > Thanks to Tzafrir help, Now I have an Asterisk-Dahdi system installed from > Stretch repository. > This system has a Digium HX8 card with BRI modules, Asterisk 13.14.0, Dahdi > 2.11.1. > BRI spans appears as up and active but I've not tested them yet: > CLI> pri show spans > PRI span 1/0: Up, Active > PRI span 2/0: Up, Active > PRI span 3/0: Up, Active > > > I'm still having some ques...

...include framing errors, coding violations, bit errors, and errored seconds. New Drivers: * dahdi_dynamic_ethmf included to support TDMoE Multi-Frame Devices from Redfone Communications. [http://www.thrallingpenguin.com/articles/tdmoe-mf.htm] Updated Drivers: * wctdm24xxp: Support for Digium Hx8 hybrid digital/analog cards. [http://www.digium.com/en/products/hybrid/] * wcte12xp, wct4xxp: Added support for more fine grained maintenance modes. Among other things, it is possible to now place cards supported by these drivers into local loopback without the use of an external loopback pl...

...include framing errors, coding violations, bit errors, and errored seconds. New Drivers: * dahdi_dynamic_ethmf included to support TDMoE Multi-Frame Devices from Redfone Communications. [http://www.thrallingpenguin.com/articles/tdmoe-mf.htm] Updated Drivers: * wctdm24xxp: Support for Digium Hx8 hybrid digital/analog cards. [http://www.digium.com/en/products/hybrid/] * wcte12xp, wct4xxp: Added support for more fine grained maintenance modes. Among other things, it is possible to now place cards supported by these drivers into local loopback without the use of an external loopback pl...

Hi, 1. Is there any manual entry about modprobe's options relative to a given Dahdi driver (wctdm24xxp, for instance) ? 2. When loading a wctdm24xxp driver, is there any parameter to pass to modprobe to configure a span in NT/point to point mode ? 3. After running dahdi_cfg -vvvvv , I can read with dmesg : [ 1986.289277] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 0 span 1 in TE mode

Hello list. I'm trying to rebuild the 2.6.9.67.0.20.EL kernel, but it fails even without modifications. How did I try it? Created a (non-root) build environment (not a mock ) Installed the kernel.scr.rpm and did a rpmbuild -ba --target=`uname -m` kernel-2.6.spec 2> prep-err.log | tee prep-out.log The build failed at the end: Processing files: kernel-xenU-devel-2.6.9-67.0.20.EL Checking

...lt; zzsyBjV~C>dxKk~IdBfF){>ten?WFKh1XiI?PmIRZO~o?O`D{UDUq{-zyRr)<OGSu8 z_jg9y_4Mk8;w{K6X>yXxbEljs^uN4jJydEtXi;ml{t7AM<W&K8 at 6c_ABhz#89xN)( z6-hr$JhE!#emTUa?7;h!RBT>E&ARxWhLLJXe88l`(#0%d3E{ssI(}-CdTo}r3iWC( z43|nb`s$<&BXjk{;5e*;b7*3SYmqar at w>ay<j%|@V~o!l9jolhX82$1y?I<yN82zw zCkuomge|Nh1|$lCh>8oS$f`sE*#);4$N{1uiAg}f-fgtny4SsRty<idy4Jm=+FG|- z#jVzA-IrFaRjIw(-t9XxXARIk&-*^#_x|zzYJMSeuGy}+wz+2Jnq$twqbGe!Zh4~H zD*q#z#{8V~e>nWw&(OQ!Hm_E_d2 at +tl<L`D;S!7B`H-S#5nH??N;+?ldDlPAI$)UA zW$lfQ(kDY=w;x|nZt1FAHmGv8vM}P)^e$6poZ1t){aTc)YFX&`@~!(...