search for: htb2

Hi ; HTB2 patch for kernel 2.2.17 HTB2 patch for iproute2 Here is my script : tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 10： htb default 20 tc class add dev eth0 parent 10: classid:10:1 htb rate 90mbit ceil 90mbit burst 2000 tc class add dev eth0 parent 10:1...

>> BUT: >> >> tc filter add dev eth1 protocol ip parent 10:1 prio 1 handle 100 fw >> classid 10:100 >> >> OUTPUT : "RTNETLINK answers: Invaid argument" > >cls_fw is not loaded ? (quick guess only). > devik tc filter add dev eth1 protocol ip parent 10:1 prio 1 fw can run !! _______________________________________________

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), an...

A question about the tc binary and diff file that are included in htb3.6-020525.tgz. I can''t seem to patch tc in the source tree, and that has made me hesitate to alternatively substitute the native /usr/sbin/tc for the binary supplied with the patch materials. I''m running kernel 2.4.19-r9, and when I run xingu:/usr/src/linux #patch -p1 --dry-run < ../htb3.6.tc.diff the

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 1 please tell me the range of "prio" _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 -

...gress qdisc to set the tc_index for the proper GRED vq(1-12). My question is: Is there a way to allow for priority between the af classes and within the af classes? also would it be possible to to the following: HTB(6Mb) | GRED(1)grio HTB1 (af1) (1MB) GRED(1-3)grio | GRED(2)grio HTB2(af2) (1MB) GRED(1-3)grio thx jason ************************what i have now************** HTB (6Mb) | GRED (1-12) using grio af11 -> gred vq 10 af12 -> gred vq 11 af13 -> gred vq 12 af21 -> gred vq 7 af23 -> gred vq 8 af23 -> gred vq 9 af31 -> gred vq...

Hello all, I am compiling a 2.4.19 kernel. I downloaded the kernel source from familiar project, which is a project working on porting linux to ipaq handheld devices. The question I have is what patch should I apply: htb3 or htb2? Also, I looked into htb3 patch. There are the source for sch_htb.c and some definitions that should be added to pkt_sch.h. I already have a sch_htb.c in my kernel source but nothing in the pkt_sch.h. My question is how to tell which one is newer: the sch_htb.c in the patch or the one I already ha...

Hello! One simple question regaring htb2->htb3 way. I''m using 2.4.25 kernel with tc3 from Devik''s site, RH9. My data flow is about 100Mbit duplex and is subject to grow, so I''m creating root class with 200Mbit rate, with r2q=10, quantum = rate/r2q, and 1500 < quantum < 200000 (sch_htb.c) with such r2...

hello is there any one who lnow what is the signification of ''@@ -2,6 +2,7 @@'' in the patch file htb2-2.4.17.diff thanks ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com

...eth1 root handle 1: htb default 30 tc class add dev eth1 parent 1: classid 1:1 htb rate 10mbit burst 15k tc class add dev eth1 parent 1:1 classid 1:10 htb rate 15kbit ceil 10mbit burst 15k tc filter add dev eth1 protocol ip parent 1:0 prio 1 handle 1 fw classid 1:10 (did the same rules for eth0), htb2, kernel 2.4.18 next mangle: iptables -I PREROUTING -t mangle -i eth1 -j MARK --set-mark 1 Well, I''ve spent hours changing values to mangle: PREROUTING, FORWARD, POSTROUTING, etc. But I can''t make it work. I want that all packets marked as "1" be limited to 15kb. I...

Hello, I have been searching for HTB theory documentation and found two interesting sources - Devik''s page and docum.org FAQ. In some places they are contradictory which make me think that Devik''s theoretic document (marked "actual") is just too old and does not reflect the latest changes. After reading http://www.docum.org/docum.org/faq/cache/30.html and others, I

...quot;) > > 0050 sport 80 - 04d2 dport 1234 - you got 0 at 20 mask 0xff it''s the MSB of > sport ... Holly Cow!!! You''re 1000% right. >> Where is the "match mark" clause? But this one is still a mistery. where did "match mark" go? Look: # ./rc.htb2 + /usr/local/src/iproute2-2.6.14-051107/tc/tc filter add dev eth0 \ protocol ip \ parent 1:0 \ prio 2 \ u32 match mark 0xa5a5 0xffff \ flowid 1:5 + /usr/local/src/iproute2-2.6.14-051107/tc/tc filter ls dev eth0 filter parent 1: protocol ip pref 2 u3...

...sch_htb ? ? ? ? ? ? ? ?21953 ?0 cls_fw ? ? ? ? ? ? ? ? ?4417 ?0 cls_u32 ? ? ? ? ? ? ? ? 7493 ?0 And that the tc command is compiled with htb and cbq support? [root at gateway sched]# which tc /sbin/tc You have new mail in /var/spool/mail/root [root at gateway sched]# strings /sbin/tc | grep htb htb2 Usage: ... qdisc add ... htb [default N] [r2q N] ... class add ... htb rate R1 [burst B1] [mpu B] [overhead O] htb: failed to calculate ceil rate table. htb: failed to calculate rate table. htb_util htb2_util I follow the configuration from the howto: tcdevices: #INTERFACE ? ? ?IN-BANDWITH ? ? OUT...

...t 1: protocol ip u32 match ip dst 1.2.3.4/32 flowid 10:10 The problem is I dont limited with 256 Kbit downloading from 1.2.3.4. If I change flowid from 10:10 to 1:20 I do get shaped so its not from a filter problem. Is it possible to use htb qdisc on top of htb qdisc ? Thanks PS: I am using last htb2 ---------------------------- Mihai RUSU Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated. _______________________________________________ LARTC mailing list /...

hi there, this is my 1st message in the list. I would like to use this wondershaper.htb to limit the bandwith usage at home. My kernel config is: # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_CSZ=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y

I notice one other small problem with my modified version of SFQ. The fact that packets can be dropped at dequeue time is incompatible with the way HTB (and probably CBQ and others modeled on it) keep statistics. When I fill a low rate queue causing packets to expire and be dropped at dequeue I get interesting statistics like this: This is my variant of SFQ qdisc plfq 8016: dev eth1 ... Sent