search for: hpt

I'm trying to build driver for hpt374 raid controler on a new installation of contOS 4.2 followin the instroctions in this thread http://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&order=DESC&topic_id=223&forum=7 It says that I should run "yum install kernel-sourcecode" to get the files I need and...

...I did not >> have any problems with the system recognizing the drive or adding it to >> the mdraid. A short SMART test shows no errors. > <snip> > Trying to get your configuration clear in my mind - the drives are 1TB > IDE, and they're attached to the m/b, or to the Hpt RAID card? > > Also, did you update the system? New kernel? If so, is the RAID card > recognized (we've got a Hpt RocketRaid card in a CentOS 6 system, and > we're *finally* replacing it with an LSI (once it comes in), because Hpt > does not care about old cards, and I had to...

...nfiguration. We're thinking of equipping two of these cards with 8 120GB Hitachi drives and run it in an RAID-5 array for video material. The usual data streams will likely be 2-3 streams at about 5-20MB/s (totally) and I know that a single drive will handle that, but I'm unsure if the HPT 454 is really stable in FreeBSD. We'll be running this on a 4.8 installation. Now to my questions... Is the HPT 454 card & driver production stable? Do you think that it will handle 60MB/s (read)? Has anyone had a drive failure with this card and successfully replaced it while the system...

...I did not >> have any problems with the system recognizing the drive or adding it to >> the mdraid. A short SMART test shows no errors. > <snip> > Trying to get your configuration clear in my mind - the drives are 1TB > IDE, and they're attached to the m/b, or to the Hpt RAID card? > > Also, did you update the system? New kernel? If so, is the RAID card > recognized (we've got a Hpt RocketRaid card in a CentOS 6 system, and > we're *finally* replacing it with an LSI (once it comes in), because Hpt > does not care about old cards, and I had to...

...an IDE-SATA adapter. I did not > have any problems with the system recognizing the drive or adding it to > the mdraid. A short SMART test shows no errors. <snip> Trying to get your configuration clear in my mind - the drives are 1TB IDE, and they're attached to the m/b, or to the Hpt RAID card? Also, did you update the system? New kernel? If so, is the RAID card recognized (we've got a Hpt RocketRaid card in a CentOS 6 system, and we're *finally* replacing it with an LSI (once it comes in), because Hpt does not care about old cards, and I had to find the source code, a...

It appears that CentOS is having problems with my hard disks, which I have off of an HPT 374 Raid controller but with no Raid stripes created, ie. I am just using it as an IDE controller. There is the latest Linux open source for the HPT 374 on Highpoint's web site, which I have downladed. While I understand 'make' and am a programmer myself, I understand nothing about t...

I am trying to upgrade my system from 500GB drives to 1TB. I was able to partition and sync the raid devices, but I cannot get the new drive to boot. This is an old system with only IDE ports. There is an added Highpoint raid card which is used only for the two extra IDE ports. I have upgraded it with a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with the system

We're doing a "mini-RC3" to encourage testing of the Highpoint driver (hptrr) backout. Testing of 7.0-RC2 showed there were problems with the driver update done between RC1 and RC2. Because it's a "mini-RC" targetted at testing of one particular thing we have not bothered with setting up FreeBSD Update. You can use the normal cvsup-and-build method of doi...

...BSD/SMP: Multiprocessor System Detected: 6 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) cpu0 (BSP): APIC ID: 16 cpu1 (AP): APIC ID: 17 cpu2 (AP): APIC ID: 18 cpu3 (AP): APIC ID: 19 cpu4 (AP): APIC ID: 20 cpu5 (AP): APIC ID: 21 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 hpt27xx: RocketRAID 27xx controller driver v1.0 (Sep 28 2012 20:26:23) cryptosoft0: <software crypto> on motherboard acpi0: <SMCI > on motherboard acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation...

...nto text mode, and repeated lines of: ext3-fs error (device hde9) in start transaction, Journal has aborted. continued to fill the screen. The only way to proceed was to hit the restart button of my computer. My thoughts of possible reasons for the failure are these. My hard drive is off of an HPT 374 Raid controller, without Raid being actually used on it, and is a 160 GB hard drive, 147 GB formatted. The /boot (hde6) partition starts at approximately the 56 GB boundary, the / (hde9) partition starts at approximately the 76 GB, and the swap drive starts at approximately the 106 GB bounda...

...len %% 4 != 0 - offset=28, inode=23880564, rec_len=21587, name_len=76 and kernel: raid5: multiple 1 requests for sector 281018464 This is on an x86 which has been running fine on the smaller raid for years (albeit Reiser); the array is built from 5 200GB Western Digi IDEs on a mix of promise and HPT controllers (there are no IDE errors visible). This is a straight 2.4.20 kernel. The previous messages to the list with this form of error have suggested the problem is related to >2TB arrays; but this one is a relative tiny one. Help greatly appreciated, Dave ---------------- Have a happy...

...stub fixme:iphlpapi:GetAdaptersAddresses no support for IPv6 addresses I intalled .Net framework 2.0 from last winetricks. I Tried Disabling IPv6 like this : http://www.webupd8.org/2009/11/how-to-disable-ipv6-in-ubuntu-910.html But the error persist. Please Help!. Ubuntu 9.10 Pentium 4, 3.0Ghz HPT 2GB RAM DDR 4GB Swap Partition 40 GB EXT4 Partition for /

...073717248 (1023 MB) avail memory = 1037139968 (989 MB) MPTable: <_HVMCPU_ XEN > ioapic0: Changing APIC ID to 1 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard pci0: <PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0:...

Hi, On my x86_64 system I have a SiL311x controller that can do RAID. If I configure my 2 identical disks in a RAID1 setup, I would expect to see only 1 block device on Linux. Still I see 2 block devices. Is this intentional, and if so, isn't that dangerous ? (i.e. writing to both disks at the same time) Anyone with an insight, please explain :) -- dag wieers, dag at wieers.com,

Just wondering if any 4.2 users out there have a favourite "dumb" PCI controller to add a couple of SATA ports to a motherboard that doesn't include SATA support. I'm not looking for anything fancy, just 2 SATA ports that a recent vintage kernel will recognize without a lot of configuration gymnastics. The intended use is for relatively light weight internet browser

Hello, In some weeks I'm going to reinstall some old RedHat9 based servers with Promise FastTrak TX2000 "semi-hardware" RAID1 controllers. I just tried to install CentOS 4.0 on a computer with a spare card and as usual both HDD attached to the RAID1 controller are seen separately by the installer because the specific driver for the TX2000 wasn't loaded. Nothing new here, it

...> MPTable: <_HVMCPU_ XEN > > ioapic0: Changing APIC ID to 1 > ioapic0: Assuming intbase of 0 > ioapic0 <Version 1.1> irqs 0-47 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard > pci0: <PCI bus> on pcib0 > isab0: <PC...

...e, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (May 5 2008 11:42:16) hptrr: HPT RocketRAID controller driver v1.1 (May 5 2008 11:42:14) npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80008058 pci_open(1a): mode1res=0x80000000 (0x8000000...

...f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 4000-403f : Intel Corp. 82371AB PIIX4 ACPI 5000-501f : Intel Corp. 82371AB PIIX4 ACPI d000-d01f : Intel Corp. 82371AB PIIX4 USB d400-d4ff : Realtek Semiconductor Co., Ltd. RTL-8139 d400-d4ff : 8139too d800-d807 : Triones Technologies, Inc. HPT366 / HPT370 dc00-dc03 : Triones Technologies, Inc. HPT366 / HPT370 e000-e0ff : Triones Technologies, Inc. HPT366 / HPT370 e000-e007 : ide2 e010-e0ff : HPT366 e400-e407 : Triones Technologies, Inc. HPT366 / HPT370 (#2) e400-e407 : ide3 e800-e803 : Triones Technologies, Inc. HPT366 / HPT370...

...CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 01:41:13) acpi0: <PTLTD XSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU...