search for: hisax_fcpcipnp

...rst, here is my config: Kernel version 2.4.25 on a Fedora distro, Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers deal with Asterisk but I can't try to figure out to get of this issue. As I see, Fritz modules are integrated with the kernel, so I directly loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by downloading archives of the web (make config - make install - insmod...). When i check loaded modules: # lsmod Module Size Used by Not tainted capi 20864 0 capifs 5424 1 [capi] kernelc...

...83104 1 snd_via82xx snd_ac97_bus 2304 1 snd_ac97_codec mousedev 11168 0 snd_pcm 81416 2 snd_via82xx,snd_ac97_codec snd_timer 23300 1 snd_pcm snd_page_alloc 10120 2 snd_via82xx,snd_pcm snd_mpu401_uart 7424 1 snd_via82xx hisax_fcpcipnp 11648 0 hisax_isac 8212 1 hisax_fcpcipnp snd_rawmidi 24224 1 snd_mpu401_uart snd_seq_device 8204 1 snd_rawmidi hisax 459728 2 hisax_fcpcipnp,hisax_isac i2c_viapro 8212 0 crc_ccitt 2176 2 via_velocity,hisax sn...

...s very basic like this: winxp ------- asterisk -------- winxp x-lite | x-lite | pstn The hardware involved is: Compaq EVO with RH9/kernel 2.4.20-30.9. Fritz!Card PCI v2 Asterisk CVS-04/17/04-21:36:18 Basically I run: modprobe -a hisax_fcpcipnp before I start asterisk with -vvvvvgc The configs are like this: MODEM.CONF: [interfaces] context=default driver=aopen driver=i4l language=en type=autodetect stripmsd=0 dialtype=tone mode=immediate device => /dev/ttyI0 device => /dev/ttyI1 group=1 msn=0208080808 incomingmsn=* device => /d...

...16 channels configured. ZT_SPANCONFIG failed on span 2: No such device or address (6) --------------------------------------------------------------- The /etc/modprobe.d/blacklist file contains, amongst others, the following lines: ------------------------------ blacklist hisax blacklist hisax_fcpcipnp blacklist 8139cp blacklist hfc4s8s_l1 ------------------------------ The /etc/zaptel.conf file looks like this: --------------------- zaptel.conf ----------------------------- # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" fxsks=1 fxols=2 fxsks=3 fxols=4 # Span 2-5: Junghans s...

If I do that, the modprobe doesn't find any module called fcpci and is looking for any module called hisax_fcpcipnp as it's the one install for the isdn fritz card. # capiinit modprobe: Can't locate module fcpci ERROR: failed to load driver fcpci Maybe, I should reinstall the fritz card drivers itselves? (however, I don't think so...)