search for: hertz

I'm considering that board as a mail and voip gateway for home use. In view of all those statements about how little resources asterisk needs, did anybody already try running asterisk on it? Thanks, Bruno.

I need a suggestion on how to implement a popup search windows in a Rails application. Something very similar to the "Hertz Location List" or "Find a Neighborhood Location" links in the Hertz reservation page https://www.hertz.com/rentacar/index.jsp?targetPage=reservationOnHomepage.jsp Many thanks in advance, Bruno

Hello everyone, I have been given the task of working out a number of issues with OpenSSH for my company (Hertz). I have been following the mailing list for several days now and I'm beginning to compile a list of who is working on what. To make my task faster, it would nice if the people working on the following issues would drop me a email before I start to rewrite their code and get it wrong. :-) I...

Hi I am doing something like this: hist(maximumPitch, xlab="Maximum Pitch in Hertz") which produces a nice histogram but what do I do to get two or three, etc on one page? I want to save the resulting file to an eps. I can find: postscript("ex.eps") which I then run something like my hist above and then dev.off() but I don't get anythin...

Did anybody already attempt to strip down an asterisk config to an absolute minimum for a specific use? Let's say I have a home installation and want to use capi and iax exclusively, and load only the channels, apps, codecs, file formats I really need. Obviously, to dig through the whole stuff, while maybe being educational, is still a major task. I'm aware of the fact that requirements

Talking * 1.0.12 here. Problem: I'd like to avoid retries with queue, i.e. if members choose to ignore a call they should not be bothered again. On the other hand, when a call times out according to the Queue(...) timeout, the call should proceed to voicemail. Setting retry in queue.conf to a high value unfortunately doesn't solve the problem. More specifically, the timeout t given to

....5 Avis domain4 4 164 1 -b---- 6.6 Avis domain5 5 164 1 -b---- 6.5 Avis domain3 3 164 1 -b---- 6.6 CocaCola domain2 2 164 1 -b---- 6.4 Hertz Domain-0 0 1948 4 r----- 218.4 SystemManagement Example for Nat: ============ [root@941e-4 ~]# iptables -L -v Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT...

Narrowband (8 kHz), wideband (16 kHz), and ultra-wideband (32 kHz) compression in the same bitstream What is the meaning of this? can i find more information about this somewhere? And what is packel loss concealment, an you enable this somewhere? thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

...TERM=linux). After [sl]tracing it i came to these results: COMMANDS : - Command: I Response: "#XPHOENIX TECH PH1200UPS VER2.00C " - Command: F Response: "#220.0 006 23.50 50.0" Seem to be nominal data: rating voltage, rating current, shutdown or maximum batt voltage and hertz ? - Command: Q1 Response: "(234.0 165.0 234.0 000 50.0 27.2 00.0 00001010" Command sequence used by UPSilon: Q1, I, F, Q1, Q1, Q1, ... UPSilon Screen capture: (UPSilon) UPS Status Screen, Ver. 2.1 XPHOENIX TECH PH1200UPS VER2.00C Copyright(C) 1998 Mega System Technologies, Inc...

..., what to do? Help would be very appreciated. Thank's a lot and ... Marry Christmas + Happy New Year Philipp ________________________________________________________________________ Dipl.-Ing. Philipp Fechteler Department Image Processing Fraunhofer Institute for Telecommunications Heinrich-Hertz-Institut (HHI) Einsteinufer 37 10587 Berlin, Germany Phone +49 30 31002 616 Fax +49 30 392 72 00 Email philipp.fechteler at hhi.fraunhofer.de WWW http://iphome.hhi.de/fechteler ________________________________________________________________________ ---- Visit us at FOE 2008 (8th Fiber Optics Exp...

...st the licence check and record from the sound card. But when I attempt to open a WAV file to process I get the error message: fixme:commdlg:GetFileName95 Flags 0x00000002 not yet implemented and the program hangs with focus switching between the GM window and the file browser window at about one hertz. The file open did actually appear to work once and I got to the next screen, but I have been unable to duplicate that success. Any and all help would be appreciated. SCENARIO ======== My system is a dual boot (specs below) between RedHat 7.2 and WindowsME Groove Mechanic is a shareware utility...

...version, since the smb.conf was only slightly modified from the working 2.0.6 / 2.2.2 PDC, nevertheless it's attached - please excuse the few germ-comments. Hopefully someone can help. Regards Gunther -- Dr. Gunther Hess Elmos Semiconductor AG Tel.: ++49 +231 7549-520 Heinrich Hertz Str. 1 Fax: ++49 +231 7549-109 D-44227 Dortmund WWW: http://www.elmos.de Opinions are strictly of my own -------------- next part -------------- # $Id: smb.conf-devil,v 1.35 2002/01/09 19:36:56 ghess Exp $ [global] workgroup = devil log file = /var/samba/dev...

Hi folks last weekend, I tried Windows Messenger first time and was stunned by the little latency it gives. Until now, I've been using softphones on Linux exclusively, like iaxcomm, linphone and sjphone, and they all give me about 1, at times even 2 secs delay. Whereas Messenger really seems to be in the millisec range. Of course, I'm now curious why there is that difference. Clearly,

...rcent UPS-MIB::upsBatteryVoltage.0 = INTEGER: 550 0.1 Volt DC UPS-MIB::upsBatteryTemperature.0 = INTEGER: 23 degrees Centigrade UPS-MIB::upsInputLineBads.0 = INTEGER: 0 UPS-MIB::upsInputNumLines.0 = INTEGER: 1 UPS-MIB::upsInputLineIndex.1 = INTEGER: 1 UPS-MIB::upsInputFrequency.1 = INTEGER: 590 0.1 Hertz UPS-MIB::upsInputVoltage.1 = INTEGER: 119 RMS Volts UPS-MIB::upsOutputSource.0 = INTEGER: normal(3) UPS-MIB::upsOutputFrequency.0 = INTEGER: 599 0.1 Hertz UPS-MIB::upsOutputNumLines.0 = INTEGER: 1 UPS-MIB::upsOutputLineIndex.1 = INTEGER: 1 UPS-MIB::upsOutputVoltage.1 = INTEGER: 119 RMS Volts UPS-MI...

Hi, all These days, I am interested in green IT area for low power OS So, I have a question about it. Is there any good idea or comments about power management related with cgroup based resource management? I have no idea about that, but it seems to be possible to find a good concept. And I hope so Is it some strange question? ^^ Regards, Dong-Jae Kang

Hi All I'm trying to get my Ultra UPS connected. It connects using a standard USB cable I have --with-drivers=hidups in the configure command and I have lsusb showing Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd Bus 001 Device 001: ID 0000:0000 I have /dev/usb/hiddev0 now matter what I try I keep getting upsdrvctl start Network UPS Tools - UPS driver controller 2.0.3 Can't

I'm trying to use Wine to run a program called heavy weather - its a windows only program that interfaces with a weather station that I have through a serial port. I was able to get the program up and running with wine. Then, I couldn't get it to connect at all to the weather station. After much too long, I finally realized that the problem was that my permissions on /dev/ttyS0 were too

...tra-wideband (32 kHz) > compression in the same bitstream > > What is the meaning of this? can i find more information about this > somewhere? > > And what is packel loss concealment, an you enable this somewhere? What are you expecting exactly here? That I explain what's a Hertz and what's a packet? I think asking your high-school teacher would be more appropriate. This mailing list isn't an interactive help system for people you can't distinguish a compiler from their left foot. That being said, I don't mind helping people here or even answering the occas...

...kage - until this spring and now the package got a NAMESPACE and dozens of bugfixes, documentation improvements and hundreds of test cases - many thanks to Sarah Schnackenberg for most of the work! - tuneR: After tuneR got mp3 read support last year, we managed to include support for mel/bark/hertz scales and conversion, powerspectra, as well as full support of LPC and MFCC coefficients (and some other stuff). Note that the former code that was documented as "experimental" for MFCC calculations has been replaced and the API changed. Many thanks to Sebastian Krey for the contribu...

...kage - until this spring and now the package got a NAMESPACE and dozens of bugfixes, documentation improvements and hundreds of test cases - many thanks to Sarah Schnackenberg for most of the work! - tuneR: After tuneR got mp3 read support last year, we managed to include support for mel/bark/hertz scales and conversion, powerspectra, as well as full support of LPC and MFCC coefficients (and some other stuff). Note that the former code that was documented as "experimental" for MFCC calculations has been replaced and the API changed. Many thanks to Sebastian Krey for the contribu...