search for: heatsink

I've got a remote system where I think I need to replace the CPU fan. in the output of dmidecode, I get... Processor Information Socket Designation: CPU 1 Type: Central Processor Family: <OUT OF SPEC> Manufacturer: Intel ID: 47 0F 00 00 FF FB EB BF Version: Intel(R) Pentium(R) D CPU 2.66GHz

On 08/13/2017 05:18 AM, ken wrote: > Also, cowboys scoff, but I always wear a grounded wrist strap when > handling electronics. It's a good idea, especially in low-humidity climates. Also noteworthy: the air moving through a hose can cause a vacuum's hose or attachment to build up a static charge, which is another reason it can be a bad idea to use a vacuum in a computer.

...? I'm not sure about the 15 inch models.? Mine had a removable interface and I replaced the killer card with an intel card and that helped quite a bit. Regarding the CPU throttleing issue, there are a bunch of posts out there that claimed that the thermal pasted was not well applied to the CPU heatsink and some people had success with carefully removing the heatsink and applying a good quality thermal paste and then reinstalling the heat sink. Would be much better if Dell support would address these issues properly, but the response from Dell on these issues have been very hit or miss.? Some peo...

...Asterisk server for SOHO use. Intel's D201GLY2 motherboard (http://tinyurl.com/ddarzp) looks like a very good deal, but I'm concerned about two things: 1. Will an A400P (from OpenVox, but supposed to be Digium-compatible http://tinyurl.com/ck6nfu) fit with a PCI riser, or will the CPU heatsink/fan be in the way? I downloaded the PDF from OpenVox's site, but didn't find the size of each PCI card 2. Performance, especially if there's the need for software echo cancelling If someone here has used this motherboard to build an Asterisk server, could you answer the questions, a...

...2005 10:43 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion'; shmaltz@gmail.com Subject: RE: [Asterisk-Users] Asterisk overheating on VIA Epia MSeriesmotherboard You can dramatically reduce the heat from your EPIA board by turning on CPU scaling! Once we turned it on, the heatsink was cool to the touch. (Even with asterisk running). MD

Hello I am running Asterisk on SUSE Linux Professional 9.3 on a VIA Epia M Series motherboard - CPU runs at 1GHz. There is no fan - just a large heatsink. Currently system is running off standard IDE hard drive - because I couldn't get astlinux to run with my Digium TDM04B card (only PCI card in system). Strangely I also have the same system also running SUSE Linux running as a file server and that does not run so hot and does not overheat?...

My notebook has a habit of getting hot, and Centos just shuts down. Just did it again: Jul 15 01:35:12 nc4010 kernel: ACPI: Critical trip point Jul 15 01:35:12 nc4010 kernel: Critical temperature reached (113 C), shutting down. Jul 15 01:35:12 nc4010 kernel: Critical temperature reached (55 C), shutting down. Jul 15 01:35:13 nc4010 shutdown[9847]: shutting down for system halt Jul 15 01:35:13

On 6/28/2015 11:50 PM, Sorin Srbu wrote: > That DIY Kit was pretty cool, thanks for the info! I note everyone is moving over to the Intel Avoton/Rangley 'system on a chip', this is the Xeon Atom C2xx8 series, like this... http://store.netgate.com/ADI/RCC-VE-2440-board.aspx (other versions of Rangley come with 2-4-6 ethernet ports, and 2-4-8 cores) these are higher performance than

I need to get a second ethernet card for my HP Proliant CentOS server, to attach a LinkSys WRT54GL router to. I see that there are many Realtek RTL8169S gigabit cards going for a song on eBay. Is anyone using one of these under CentOS? Do they work OK? (I used to have a couple of Realtek cards - not gigabit - and they worked fine.) Or does anyone have a strong recommendation for other cards? Any

...rs Mailing List - Non-Commercial Discussion'; > shmaltz@gmail.com > Subject: RE: [Asterisk-Users] Asterisk overheating on VIA Epia > MSeriesmotherboard > > > You can dramatically reduce the heat from your EPIA board by turning > on CPU scaling! Once we turned it on, the heatsink was cool to the > touch. (Even with asterisk running). > > MD > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman...

Hello all..... I would like to know if anyone here has had good experience with this Supermicro motherboard.....http://supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm I am thinking about using it in an entry level mail and file server with a 3ware card and 200 GB SATA drives. Cost is a factor here otherwise I would go for an Opteron board instead. JC

I just replaced my fan in my nc2400. It was a 5hour job. Had to pull EVERYTHING to get to where they have the fan in the thing. Now I want to know if it is working. It is suppose to be thermostatically controlled, and it takes time to heat up. So how can I find out what Centos knows about the system temp and fan state? It was hard to tell if I put the connector in the right way. At least

-----Original message----- > From:H <agents at meddatainc.com> > Sent: Monday 3rd September 2018 14:52 > To: Centos Mailing List <centos at centos.org> > Subject: [CentOS] Centos on Dell XPS15 > > Is anyone successfully running Centos 7 on a Dell XPS15? If so, which model? If not, what was the problem? > > Thank you! I only ran Fedora 28 Workstation Live from

hi; does any body know what are the physical dimension of a digium care 400pm for example? thanks m.smadi

Hello again. Since my last post about giving up on Prey I have had to change my graphics card. The cooling fan on my ATI packed up and it was a choice of a new fan/heatsink combination and having to nearly rebuild my pc to allow room for it (nearly the size of my card and over 1 inch thick !) or replacing the card. Since I thought that the fan problem might be the thin end of the wedge and I might get more problems with the card I decided to replace it. I bought a Spa...

...deo conference meetings, I do not have > > any thermal shutdown events. I would check for fan function The most common issue with E6 series laptops is dust/lint/hair in the fan grill. The bios fan control is based on an efficient extraction of heat, but a small amount of lint will keep it heatsink warmer longer. <snip/> > I might try downgrading the BIOS version to see if that > helps. I don't know that I've tried doing that with Dell's > utility before, but I'll give it a shot. > > I setup a short loop to append the output of /usr/bin/sensors > t...

After installing a Phenom II X4 processor (replacing a single core Semperon) I am getting these messages on the console and in dmesg: Warning Timer ISR/2: Time went backwards: delta=-250135996 delta_cpu=13864004 shadow=1355887856733 off=870052783 processed=1357008044419 cpu_processed=1356744044419 0: 1357004044419 1: 1356696044419 2: 1356744044419 3: 1356696044419 printk: 41 messages

This is a A8N32-SLI Deluxe motherboard with a AMD Athlon(tm) 64 X2 Dual Core 4400+ Processor. It freezes and cannot be accessed from the network. Keyboard/mouse/display, everything just stuck. It had an uptime of 17 days after I re-connected all cables and boards after a similar crash. My feeling is, this must be a hardware related problem. I inspected the logs under /var/log, but nothing.

Just built myself a little test server with an Atom 230 processor in it and am quite impressed with it so-far. Wondering is anyones used one in anger for a VoIP platform? I'm after something with a bit more oomph than the VIAs I'm currently using that I can use in a small box (mini ATX size) without going full-blown Xeons, etc. Cheers, Gordon

Though quiet at the moment, my desktop sometimes sometimes makes a noise that I attribute to either a disk or a fan on its last legs. I'm looking for suggestions for distinguishing. For the disk, I expect I should use either hdparm of fsck. Even after reading the man page, I'm not sure how I would use hdparm. If I use fsck, what should I take as evidence of a bad drive? A good drive? Is