search for: heaters

Hello I'm sure someone has already tried this: I use a couple of electric heaters to heat my office. I'd like to somehow connect them to Asterisk so that I could switch them on remotely by either calling the IVR or sending an e-mail to the Asterisk host, so that the room is warm when I get to the office :-) Any information appreciated. Thank you.

...rs-request@lists.digium.com: > > Would it be considered trolling to start a thread on Cleaning Maple > > Syrup off of Dial Pads, or Wiring your Moose for Wi-Fi? > > Let's not forget the weekly "tooques and telephony" segment, and a > review of > the best block heaters for your wi-fi fones. > Oh, we're gonna have a good time next Thursday. We need to get Molson Canadian to sponsor us and find Bob & Doug for the event? By the way, eh. It's hard to get the moose to cooperate. When you put the parabolic antenna on his antlers you have to ride him b...

...>> >> That device is quite expensive. You could probably find something much >> cheaper on ebay. >> >> >> Gilles wrote: >> >>> Hello >>> >>> I'm sure someone has already tried this: I use a couple of electric >>> heaters to heat my office. >>> >>> I'd like to somehow connect them to Asterisk so that I could switch >>> them on remotely by either calling the IVR or sending an e-mail to the >>> Asterisk host, so that the room is warm when I get to the office :-) >>> &gt...

...ourly data for system load. If you haven't worked with electricity before, seasonality comes in many flavors: a daily pattern, with a peak at around 7pm; a weekly pattern, in which we use more electricity on weekdays in comparison to weekends; a winter-summer pattern, with air conditioning and heaters playing an important role, etc. In SAS, I could specify an ARIMA with multiple seasonality terms, say (1,0,1) with period=24, and (1,0,1) with period=168 (I don't remember the orders I was using). This is how many studies I found on IEEE were modeling electricity load and it worked pretty wel...

I've heard comments about the instability of the IAXy (loosing IP, locking up, etc) . I want to deploy some, in a remote site. The comments on the instability suggest that the simplest approach is to power-cycle them when you have problems. The IAXy would only be in use from 3PM to 8 PM. My potential simple solution is to have a timed power brick (like what you would use for a block heater)

I'm struggling to configuring nut for MGE Pulsar Ellipse 800 (at least Ellipse 800) for two boxes - home firewall and file server. I'm using Debian 4.0 Etch, every one of them. I'm built (after some dangerouse experiments) a testing configuration, where boxes are plugged to line, server playing as a master, firewall as a slave, and UPS connected to an electric heater about 300 Wats (no

First, apologies if this is the wrong mailing list to pose this question. That said, my question: This is my first time using nut. Just built nut-2.2.2. The tripplite driver does not support my version of the smart2200 which has a product id of 3014. Does anyone know about this ups? There is a 3012. I'm tempted to simply add the 3014 to tripplite-hid.c to see if it will "just

...UPS myups at localhost on line power =========================== But it bumps the printer just long enough to generate the above entries. And that pops up a bogus advisory that it cannot find the drivers for it. I cannot put that printer on the 1500 WA UPS, as its drum heaters kicking in at the start of a job or at power up, cause the UPS to do an instant, protective shutdown. But these bumps are so short the printer does not forget its turned on, but does trigger a re-init cycle. > > However, for a one-second glitch, many of the NUT drivers might miss > that i...

upsmon.conf using NOTIFCMD and NOTIFYFLG is working well, it is calling my script "notify" on requested events (ONBATTERY,LOWBATTERY and ONLINE). Command #upsmon -c fsd -u monmaster myups at localhost gracefully shutdown my box and after several seconds switch off the ups's load. Two problems: - notify script is called and executed as user "nut" (as it used to be

Dear Nick, thanks for writing. I no longer work on development of UPS drivers; you will probably get a more up-to-date answer from the nut-upsuser mailing list (cc'd). I don't know if the Back-UPS 550 has similar commands to the Back-UPS ES 650. If it has a USB connection, then the answer is probably yes. The UPS will automatically turn itself back on after a power failure; this is the

On 02/04/2015 10:17 AM, James B. Byrne wrote: > I had a friend, now deceased, who worked as an RCA colour TV > technician when he was very young. In the 1950s he would be sent to > the homes of people having trouble adjusting the colour settings on > their new RCA's. That was system administration then. Who needs them > now? Broadcasters. You still need color balance chops

I have all working and the test shutdown using 'upsmon -c fsd' worked. Also I get appropriate messages on console when I pull power and restore. But I want to *see* it work by removing power, but I don't want to wait. How can I tell UPS to issue needed message after a minute on battery? Durwin F. De La Rue Management Sciences, Inc. 6022 Constitution Ave. NE Albuquerque, NM 87110

Currently, Alpha, PowerPC and X86 implement LowerFORMAL_ARGUMENTS. PowerPC and X86 lower ISD::CALL in LowerOperation. Alpha implements custom select. What is the preferred way to implement this? Thanks, Rafael

I'd like to hear from anyone using coreos to run a container with tinc for purpose of connecting containers. Sounds almost like a chicken/egg problem:-) I'm thinking of running a container with alpine linux and tinc installed there. John Griessen

Hi, folks, I'm installing a RAID controller card for a large external RAID box in a Dell server. I've got two riser slots available. Here's the question: the controller card has some large chips on one side, and if I put it in riser 1, those chips face downwards in the box, blocking ease of cooling, while if I put it in riser 2, the chips will face up... but be right over a large

Hi, I'm testing samba 4 in my organization. I have a samba3 domain with LDAP backend. I'm trying migrate workstations and users from old samba to samba4. Is this possible? Thanks, Luciano luciano at multitasknet.com.br

I received a private request for my complete dataset from my previous questions. In gratitude to the developers of R, and especially to the helpful members of r-help, I'm happy to attach it. Anyone is free to use this dataset in any manner they wish, including published books. Attribution is not required, or even desired. Explanatory notes on dataset: This data is collected from monthly

On 08/13/2017 05:18 AM, ken wrote: > Also, cowboys scoff, but I always wear a grounded wrist strap when > handling electronics. It's a good idea, especially in low-humidity climates. Also noteworthy: the air moving through a hose can cause a vacuum's hose or attachment to build up a static charge, which is another reason it can be a bad idea to use a vacuum in a computer.

Hi all A slightly off topic post, but one that I think someone out there in the NUT community could probably help me with. Summer is coming, and my office at home is getting hot... helped in part by the APC 3KVA UPS I have sitting under my desk. It kicks out heat like a bar-heater, even when there is almost no load on it (idle load is one PC, one switch, one wireless AP, and thats it). It is

Greetings all; Is it possible to set a logging option in one of the config files so that when we have a 1 second power bump, the date is included, both in the log, and in the -wall broadcast? We apparently have a substation regulator in the process of failing, and the recycle isn't normally slow enough to reset the clocks, but it killing one of my computers w/o actually causing a reboot.