search for: hdh

...11.0 > PDC20265: chipset revision 2 > PDC20265: 100% native mode on irq 10 > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary > PCI Mode. > ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio > Probing IDE interface ide2... > hde: Maxtor 6Y080L0, ATA DISK drive > ide2 at 0x9400-0x9407,0x9002 on irq 10 > > It''s a known problem? There''s a patch somewhere? You''ll need to enable the pdc202xx_old in your kernel config and rebuild the kernel. BL...

...ich means it should look just like regular IDE controller to the OS. In this mode, ide0 and ide1 are PATA controllers, and 4 SATA ports are mapped to ide2 and ide3. If I boot from the 2.1 installation CD, all the drives are detected (CD-ROM as hda, and four SATA drives as hde, hdf, hdg, and hdh, just as expecte per above mappings). It detect IRQ for ide2/3 right away, and says it will probe for IRQ for ide0 later. Well, it hangs just after it probes and detects IRQ for ide0. I've tried all bunch of "standard" kernel options (turnning off DMA, disabling ACPI, and s...

...Bestand 05/12/2003 15:51:36 syslinux.cfg 553 CFG-bestand 17/12/2003 15:07:20 something like this should work for isolinux.cfg LABEL knoppix kernel VMLINUZ append ramdisk_size=100000 init=/etc/init lang=us apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi vga=791 initrd=MINIROOT.GZ nomce quiet BOOT_IMAGE=KNOPPIX the knoppix floppy file contains: ldlinux.sys syslinux syslinux.cfg vmlinuz 600KB or so initrd.gz 300KB or so. this means you should have plenty of space. I don't know if anyone has succeeded in a Linux 2.6 bootdisk wi...

Is there a simple way to directly install a vm on an lvm (or proably seperate LVM's for root and swap)? For example something like: lvcreate -L 10G -n testvm_root vg_myvg lvcreate -L 1G -n testvm_swap Then somehow setup the VM to be able to directly install and boot the vm from these LV's. How do I do this? Could you then pause the virtual machine and safely take an LVM snapshot,

...e=ttyS1,115200 root=/dev/nfs nfsroot=192.168.0.18:/home/mike/nfs/ nfsaddrs=192.168.0.50:192.168.0.18::255.255.255.0:epc:eth0:none LABEL dos KERNEL rom-dos.bss # Add the following line to append for TS-3300 or TS-5300 Rev C or older # hdb=none hdc=none hdd=none hde=none hdf=none hdg=none hdh=none hdi=none hdj=none hdk=none hdl=none # for TS-9500 with Compact Flash as IDE2 and VGA as console: #1) add jumper for IRQ5 on TS-9500 on TS-3300 or TS-5300 only #2) add "ide1=0x170,0x376,5" to APPEND line, remove "hdc=none" if present #3) change console=ttyS1 to console=tty...

..., and buggy design, it seems). The symptom is that as the kernel loads, the Intel PIIX4 chip is detected, and parameters for ide0 and 1, hda through hdd are retrieved from the BIOS as expected, then the Samurai controller is detected, and the kernel tries to retrieve info on ide2,3 and hde through hdh from the BIOS (which isn't there) and hangs. I _think_ I have tried every combination of trying to pass parameters to the kernel to tell it to ignore that controller, using command line parameters and editing the syslinux.cfg file on the install floppy, to no avail. I even tried editing the p...

...ave plenty that I want to use: disk=[''file:/vserver/vm_disks/Patch.disk.xm,hda,w'', ''phy:/dev/sda,ioemu:hdd,w'', ''phy:/dev/sdb,ioemu:hde,w'', ''phy:sdc,ioemu:hdf,w'', ''phy:sdd,ioemu:hdg,w'', ''phy:sdg,ioemu:hdh,w'', ''phy:sdh,ioemu:hdi,w'', ''file:/vserver/FreeNAS-amd64-LiveCD-0.69RC2.4083.iso,hdc:cdrom,r''] I have tried both with and without "ioemu" and changing the order does not make any significant difference. Pointers anyone? Thanks, /Chris _____...

...T370: chipset revision 3 Apr 22 08:51:10 aurora kernel: HPT370: not 100%% native mode: will probe irqs later Apr 22 08:51:10 aurora kernel: ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:DMA, hdf:pio Apr 22 08:51:10 aurora kernel: ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:DMA, hdh:pio Apr 22 08:51:10 aurora kernel: hda: C/H/S=36798/16/255 from BIOS ignored Apr 22 08:51:10 aurora kernel: hda: IBM-DTLA-307075, ATA DISK drive Apr 22 08:51:10 aurora kernel: hdb: IBM-DTLA-307045, ATA DISK drive Apr 22 08:51:10 aurora kernel: hdc: IBM-DTLA-307075, ATA DISK drive Apr 22 08:51:10 au...

On Monday 14 March 2005 06:29 pm, Mark Williamson wrote: > > I don''t know if this is the right place to post, but I can''t find any > > info about my problem on the net. > > Yes, this is the right place. > > > title Xen2610 > > kernel /boot/xen.gz dom0_mem=131072 console=vga > > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0

Hi, Apologies, this is going to be quite long - I'm going to provide as much info as possible. I'm running a system with ext3 fs on software RAID. The RAID set-up is as shown below: jlm@nijinsky:~$ cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] read_ahead 1024 sectors md0 : active raid1 hdc1[1] hda1[0] 96256 blocks [2/2] [UU] md5 : active raid1 hdk1[1] hde1[0]

At the risk of angering the crash Gods, my sustem has NOT crashed again since I downgraded the kernel from 2.6.18-1.2239.fc5 to 2.6.18-1.2200.fc5. Given that newfound stability, and my lack of time, I'm going to put on hold any further diagnostics, until the next kernel revision is released. I have submitted a report at bugzilla.redhat.com (bug 218128). (Ah, nuts; accidentally created a

Hello list. I'm trying to rebuild the 2.6.9.67.0.20.EL kernel, but it fails even without modifications. How did I try it? Created a (non-root) build environment (not a mock ) Installed the kernel.scr.rpm and did a rpmbuild -ba --target=`uname -m` kernel-2.6.spec 2> prep-err.log | tee prep-out.log The build failed at the end: Processing files: kernel-xenU-devel-2.6.9-67.0.20.EL Checking

...p at 21r zSeI*}Q~aDNc)wckp2l$t;NqaU-VkK!H&YwRs>@8x=Jr|LBS0VbrPGr;4m9YH#l7~g zM$j<}loWw92iUTtWv;!zM<LWJXr#E`X+&x|uH}7bpT-a+o?!oeME-EE<Y1x8EX}UA zX9+ZyEuUbEx{;XWh^0F+S)#dymIAXx_h}_48yR5^Ls at A~mb;t~rd{M`C3HthL|rb+ zS!vXqI92#f&xqO<eS=;wfgKTRen&AeNjW*kFpnARbIfTHJC6BFVJ9%9HDh03MpM~I zOjs)W5>r_-_LV_Dg)|2mkjAfrPI*jq)>R#e+$(dSk&6z~oaoXJ?hTAFw1XIBwPKK^ zZ5EQnL?Odwq3adJTn5uGcq()DYLD6L8anhXrmIVQgdYl4>EisvLo@^yXo{in*uQzC zBI6D$ZXK2VpUYDG+76Hjw>#%2s&zUGal3PP!u=}Kt#c}U(P?twYM|@Ki^ckFNwE|! zwimy`-|1D!Umg+%2R;&IYer|;McMAezwRASva>W3FG8%w+h)$hN4Pnf$ByvOVQy...