search for: hdg

Hello, this morning my centos 5 server (2.6.18-53.1.4.el5) failed on the dvd device and disabled dma. The dvd-writer (/dev/hdg) is connected to the following controller as a secondary master. 02:07.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) There is also an harddisc as primary master connected on this controller. This harddisc is the only device in the system that I put to sl...

...the two extra IDE ports. I have upgraded it with >> a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with >> the system recognizing the drive or adding it to the mdraid. A short SMART >> test shows no errors. >> >> Partitions: >> Disk /dev/hdg: 1000.2 GB, 1000204886016 bytes >> 255 heads, 63 sectors/track, 121601 cylinders >> Units = cylinders of 16065 * 512 = 8225280 bytes >> >> Device Boot Start End Blocks Id System >> /dev/hdg1 1 25 200781 fd Linux r...

...ystem %iowait %steal %idle 2.81 0.00 9.62 73.95 0.00 13.63 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn hda 51.10 3033.27 20.84 15136 104 hde 53.91 3028.46 16.03 15112 80 hdg 49.90 2993.19 19.24 14936 96 hdi 47.49 3036.47 6.41 15152 32 hdk 49.30 2993.19 14.43 14936 72 Using a midrange Laptop running Windows XP on gigabit - Reads at 20MB/s avg-cpu: %us...

On 8/5/2015 1:00 PM, Chris Murphy wrote: > On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >> How would I go about pointing it at the partition? >> >> What I am currently doing is this: >> device (hd0) /dev/hdg >> root (hd0,0) >> setup (hd0) > > setup (hd1,0) > > It's hd1 if your device map is correct and hdg is hd1. And then ,0 is > for the first partition assuming that's an ext3 boot partition. What I am doing on my other system (where everything is working), is forc...

...hris Murphy wrote: >> >> On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> >> wrote: >>> >>> How would I go about pointing it at the partition? >>> >>> What I am currently doing is this: >>> device (hd0) /dev/hdg >>> root (hd0,0) >>> setup (hd0) >> >> >> setup (hd1,0) >> >> It's hd1 if your device map is correct and hdg is hd1. And then ,0 is >> for the first partition assuming that's an ext3 boot partition. > > > What I am doing on my o...

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Att...

HI R lovers, I have been facing a petty trouble with datas' import : I have a plain txt file (see attached file or the copy below) that I cannot read either with scan or read.table > scan(file="F:/Alt/HDG/Stoliaroff/Data/test.txt") Error in scan(file = "F:/Alt/HDG/Stoliaroff/Data/test.txt") : "scan" expected a real, got "??6" > read.table(file="F:/Alt/HDG/Stoliaroff/Data/test.txt") V1 1 ??6 2 \n 3 6 4 4 5 5 6 3 7 3 8 \...

...added Highpoint raid card which is used only for the two extra IDE ports. I have upgraded it with a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with the system recognizing the drive or adding it to the mdraid. A short SMART test shows no errors. Partitions: Disk /dev/hdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdg1 1 25 200781 fd Linux raid autodetect /dev/hdg2 26...

Apologies if you get this twice - the first one didn't seem to make it... Hi Guys, I have just replaced a faulty Max...woah, wait...this one's a Seagate... IDE hard disk but I cannot remake the software raid pair. The currently running disk is hda and I am trying to add back hdg - both are master drives on separate controllers. I have run fdisk on hdg and created the same partition structure as had and changed their types to 'fd' but when I try and rebuild the array I get: mdadm /dev/md0 -a /dev/hdg1 mdadm: hot add failed for /dev/hdg1: Invalid argument If I lo...

...dmesg, I'm seeing something strange.. I think this is determined by kernel internals. It seems strange and problematic to me. I believe this number is controller dependant, so I'm wondering if I have a controller issue here... hda: max request size: 128KiB hdc: max request size: 1024KiB hdg: max request size: 64KiB hdi: max request size: 128KiB hdk: max request size: 1024KiB From all of this information, I believe my hard drives are somehow not tuned properly due to the low hdparm numbers, especially hda and hdc. This is causing the raid array to perform poorly, in dbench and hdp...

...d which is used only for the two extra IDE ports. I have upgraded it with > a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with > the system recognizing the drive or adding it to the mdraid. A short SMART > test shows no errors. > > Partitions: > Disk /dev/hdg: 1000.2 GB, 1000204886016 bytes > 255 heads, 63 sectors/track, 121601 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > > Device Boot Start End Blocks Id System > /dev/hdg1 1 25 200781 fd Linux raid > autodetect &...

...at. Cylinder 1 is the same as LBA 63. And that is sufficiently large for a GRUB legacy stage 2. - OK this is screwy. Partitions 1 and 3 on both drives have the same number of sectors, but partitions 2 differ: /dev/hde2 401,625 975,691,709 975,290,085 fd Linux raid autodetect /dev/hdg2 401,625 1,952,491,904 1,952,090,280 fd Linux raid autodetect That can't work as these are two partitions meant to form /dev/md2 and need to be the same size. - Also, 401625 is not 8 sector aligned. So it's a double whammy and since it has to be repartitioned anyway you might...

...nstaller and partitioning utility (parted) predate Advanced Format drives. I'd check to see whether you have such a drive. > Version : 0.90.00 Therefore 0xfd is correct. > I'm willing to give that a try. The device.map looks good to me: > (hd0) /dev/hde > (hd1) /dev/hdg > > It is old, but the drives are still connected to the same connectors, so it > should still be valid. I think you need to confirm that the device.map is correct. I just don't remember the command to figure out the mapping. > > How would I go about pointing it at the partitio...

Have 4 harddrives hde,hdg etc all of these drives are mounted in samba. When i copy file from one drive to another i notice that server sends the file to my computer and then back to itself (into the right place). The file will be copied but doing so it will eat half of my network bandwith. Is it possible to aviod this? B...

...ernel: HPT370: chipset revision 3 Apr 22 08:51:10 aurora kernel: HPT370: not 100%% native mode: will probe irqs later Apr 22 08:51:10 aurora kernel: ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:DMA, hdf:pio Apr 22 08:51:10 aurora kernel: ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:DMA, hdh:pio Apr 22 08:51:10 aurora kernel: hda: C/H/S=36798/16/255 from BIOS ignored Apr 22 08:51:10 aurora kernel: hda: IBM-DTLA-307075, ATA DISK drive Apr 22 08:51:10 aurora kernel: hdb: IBM-DTLA-307045, ATA DISK drive Apr 22 08:51:10 aurora kernel: hdc: IBM-DTLA-307075, ATA DISK drive Apr 22 08...

...0000:00:11.0 > PDC20265: chipset revision 2 > PDC20265: 100% native mode on irq 10 > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary > PCI Mode. > ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio > Probing IDE interface ide2... > hde: Maxtor 6Y080L0, ATA DISK drive > ide2 at 0x9400-0x9407,0x9002 on irq 10 > > It''s a known problem? There''s a patch somewhere? You''ll need to enable the pdc202xx_old in your kernel config and rebuild the k...

I have a file that I'm planning on manipulating with sqldf(). The header for this file is malformed, and I was wondering if there's a way to specify the values of the header ahead of time. I can see there are T/F options for header in sqldf(... list(header=T, ...), but was wondering if there's a way to explicitly stated what the header should be. Thanks, Andrew [[alternative HTML

..., I'm not sure if this is a hardware issue, a driver issue, an ext3 issue or some combination of them... I have a KT133A motherboard with an on-board promise controller, and an ACARD ATP865 in a PCI slot. I'm running 2.4.19-ac4 with the lvm 1.0.5 patches. The acard has two drives, hde and hdg attached to it, both ibm120GXPs, both primary, badblocks shows them as good, smartctl shows them as good. If, say I create a single partition on /dev/hde1 type linux and format it ext3, mount it, copy a file into it, unmount it, mount it again and read the file, it's corrupted. (I tested this b...

...twork, mysql , httpd etc). How can I solve this? I've followed the manual ( http://www.gnu.org/software/grub/manual/html_node/Installing-GRUB-using-grub_002dinstall.html#Installing-GRUB-using-grub_002dinstall) but now just keeps beeping with the GRUB fixed :) I have 3 IDE disks, hda, hde and hdg. My /boot is a raid device /dev/md0 of /dev/(hda2,hde2,hdg2). cat /proc/mdstat shows all disks online and active in the array. I have tried the grub-install --root-directory=boot --no-floppy hd0 (ou /dev/hda). With the same results. Ideas? -------------- next part -------------- An HTML attachme...

Dumb thought: I don't remember how, other than from a grub menu, but I'm pretty sure there's a way to default boot into a grub shell. Once there, you can see, using file completion, the drives, and where your initrd is. mark