search for: hauk

...ted before. This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and one HDMI monitor running with 2560x1440 at 56 and one DVI monitor running with 1920x1200 at 60. This still needs testing on other graphics cards and with dual link DVI. There is no Maintainers entry for nouveau. Hauke Mehrtens (2): drm/nouveau: activate dual link TMDS links only when possible drm/nouveau: increase max pixel clock to 225 MHZ for HDMI drivers/gpu/drm/nouveau/nouveau_connector.c | 6 ++++-- drivers/gpu/drm/nouveau/nv50_display.c | 8 ++++---- drivers/gpu/drm/nouveau/nvkm/engin...

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actual p...

On Tue, Nov 3, 2015 at 7:02 PM, Ben Skeggs <skeggsb at gmail.com> wrote: > On 11/04/2015 08:41 AM, Ilia Mirkin wrote: >> From: Hauke Mehrtens <hauke at hauke-m.de> >> >> Without this patch a pixel clock rate above 165 MHz on a TMDS link is >> assumed to be dual link. This is true for DVI, but not for HDMI. HDMI >> supports no dual link, but it supports pixel clock rates above 165 MHz. >> Only...

...6 2.1) died on me with Dec 14 10:53:52 bounce dovecot: pipe() failed: Too many open files Dec 14 10:54:23 bounce last message repeated 279661 times Dec 14 10:56:23 bounce last message repeated 1071807 times Dec 14 10:56:59 bounce last message repeated 325386 times -- any ideas on what to tune? hauke -- /~\ The ASCII Ribbon Campaign Hauke Fath \ / No HTML/RTF in email Institut f?r Nachrichtentechnik X No Word docs in email TU Darmstadt / \ Respect for open standards Ruf +49-6151-16-3281

On 28.05.2018 12:06, Hauke Fath wrote: > On 05/21/18 17:55, Aki Tuomi wrote: >> ssl_ca is used only for validating client certificates. > > But it was used (though not documented, IIRC) for validating server > certs, too. Since intermediate CA certs are usually valid a lot longer > than the server certs...

...u try if it works if you concatenate the cert and cert-chain > to single file? We'll start looking if this is misunderstanding or bug. This is a production machine, so I would rather stick with the downgrade until you've looked into the issue. I went home late yesterday. ;) Cheerio, Hauke -- The ASCII Ribbon Campaign Hauke Fath () No HTML/RTF in email Institut f?r Nachrichtentechnik /\ No Word docs in email TU Darmstadt Respect for open standards Ruf +49-6151-16-21344

On 28.05.2018 13:05, Hauke Fath wrote: > On 05/28/18 11:08, Aki Tuomi wrote: >> >> >> On 28.05.2018 12:06, Hauke Fath wrote: >>> On 05/21/18 17:55, Aki Tuomi wrote: >>>> ssl_ca is used only for validating client certificates. >>> >>> But it was used (though not doc...

...p my SAMBA 4 DC in the following Way: Shutdown Samba AD Backup the hole System Start Samba AD So i think i don't habe any Problems with open Files, when i backup the AD. Is it recommended to backup the AD Files with the samba Backup Script? If it is recommended, can you tell me why? Thanks Hauke -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAEBAgAGBQJUw9sUAAoJEEIVizQb/Y0m1HcQAI/nIxqJbBZTo/jw6r1muRzI oAkHHHxJjzNfSKhl3af7Ty6Ue4HwD1lfmzMNQkuX/Qr4ac5SwyoL3jag6gO5hjin Snw4q7T2fJ0eSfrsqOclCrB2uYZwN7Z//p46l12AoRkHcyDUlMDyVgo3ZJ6flOig cOoLA1FDp2QdjuR4wJSP51QGQ8c20Xe+TIr1Q...

On 28.05.2018 14:30, Hauke Fath wrote: > On Mon, 28 May 2018 13:52:01 +0300, Aki Tuomi wrote: >> I'm sure. But putting it as ssl_ca makes no sense, since it becomes >> confused what it is for. > I guess - I haven't had a need for client certs, and only ever used > ssl_ca for the server ca chain...

On 11/04/2015 08:41 AM, Ilia Mirkin wrote: > From: Hauke Mehrtens <hauke at hauke-m.de> > > Without this patch a pixel clock rate above 165 MHz on a TMDS link is > assumed to be dual link. This is true for DVI, but not for HDMI. HDMI > supports no dual link, but it supports pixel clock rates above 165 MHz. > Only activate Dual Link...

...ith dual link DVI. There is no Maintainers entry for nouveau. This is based on top of Linux 4.3-rc4. I am not used to the process uses by nouveau developers and I hope this is the correct way to get this patch into upstream Linux. changes since v1: * rebase on 4.3-rc4 * update commit message Hauke Mehrtens (2): drm/nouveau: activate dual link TMDS links only when possible drm/nouveau: increase max pixel clock to 225 MHZ for HDMI drivers/gpu/drm/nouveau/nouveau_connector.c | 6 ++++-- drivers/gpu/drm/nouveau/nv50_display.c | 8 ++++---- drivers/gpu/drm/nouveau/nvkm/engin...

...child blocks stdin or stdout (don't know yet) so the DIAL command cannot send its result back to the child. I tried to understand app_queue.c and app_meetme.c from Asterisk source but unfortunately after reading the codes I was _really_ puzzled :( Thanks for a little hint :) Kind regards, Hauke

...s should be possible with the current wine build (witch special patch). My problem is, that SPORE doesn't like my graphiccard. So it alerts that my GC isn't supported by the game. Is it possible to change the graphiccard ID string, that wine will given to the game? greets from germany Hauke

...ected (no auth attempts in 0 secs): user=<>, rip=XXX, lip=YYY, TLS handshaking: SSL_accept() failed: error:14094416:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate unknown: SSL alert number 46, session=<uKK/kAlia+GCUyU5> We fixed the issue by downgrading to 2.2.33.2. Cheerio, hauke -- The ASCII Ribbon Campaign Hauke Fath () No HTML/RTF in email Institut f?r Nachrichtentechnik /\ No Word docs in email TU Darmstadt Respect for open standards Ruf +49-6151-16-21344

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actually...

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actually...

...t.org/list/dovecot/2018-January/110638.html> ff., you told me that "ssl_ca", despite the name, was for client certificates only, and that I was supposed to append the CA certificate(s) to the server certificate file. I am glad to hear you consider this a bad idea now. ;) Cheerio, Hauke -- The ASCII Ribbon Campaign Hauke Fath () No HTML/RTF in email Institut f?r Nachrichtentechnik /\ No Word docs in email TU Darmstadt Respect for open standards Ruf +49-6151-16-21344

...(3) I see a regular log entry from a MS Outlook 2000 SP 3 Jun 3 10:26:23 bounce imap-login: SSL_read() syscall failed: EOF [130.83.XXX.XXX] The setup here: OS NetBSD 2.0beta, MTA sendmail 8.12.11, LDA maildrop 1.3.9, dovecot 0.99.10.6, OpenSSL 0.9.7d Any ideas? My users are starting to nag... hauke -- Institut f?r Nachrichtentechnik /~\ The ASCII Ribbon Campaign FG Signalverarbeitung \ / No HTML/RTF in email TU Darmstadt X No Word docs in email Ruf +49-6151-16-3281, Fax -3778 / \ Respect for open standards

...mmended concatenating > the intermediates with the cert. Aki, after the issue came up last time <http://dovecot.2317879.n4.nabble.com/dovecot-2-2-openssl-1-0-vs-dovecot-2-3-openssl-1-1-1-ssl-regression-tt65322.html#none>, you appeared to have changed your mind? What happened? Cheerio, Hauke -- The ASCII Ribbon Campaign Hauke Fath () No HTML/RTF in email Institut f?r Nachrichtentechnik /\ No Word docs in email TU Darmstadt Respect for open standards Ruf +49-6151-16-21344

Hey guys, I'm currently using Ubuntu 10.04 for setting up Samba4 and I'm having a problem with the dlz_dlopen driver. I've installed Bind9 from hauke (https://launchpad.net/~hauke/+archive/bind9) because the bind9 version from the apt-get didn't give me the correct version. I've included the /usr/local/samba/private/named.conf file in my /etc/bind/named.conf, but on starting the bind9 service I get the following message: dlz_dlopen: i...