search for: handytones

...odecs in order of preference [131] type=friend host=dynamic reinvite=no canreinvite=no qualify=300 callerid="handytone <131>" mailbox=131 nat=0 Handytone info: Software Version: Program--1.0.4.17 Bootloader--1.0.0.11 HTML--1.0.0.19 Both on same subnet, no NAT. I have two Handytones, both exhibit same symptoms. Anyone else have this problem? --

Hello, I bought a Grandstream Handytone 486 to forward incoming calls from our old analogue PBX to the asterisk server. My first test was connecting an analogue phone to the Handytone and calling a sip phone - worked. Now I used the same cable to connect the line port of the Handytone to the analogue pbx. When I call the number of the analogue PBX I hear a clicking inside, but the call

Hi, Just received recently released Grandstream handytone 286 ATA for testing. I can call ATA from any other extensions and conversations seems to be of quite good quality. However placing calls from ATA is not possible at all to any extensions. After dialing there no indications of any kind from ATA at all. It just "hangs in there". ATA is behind NAT, registers to an * with public IP

Hi ; Have two handytone 486 and want to use them as digium TDM400 fxo-fxs card... I mean is it possible to direct pstn calls from astersik (extensions) to handytone line port directly and vice versa ?... Thanks in advance Betul Onemli not : Bu e-mail iletisi, sadece adreste belirtilen kisi veya kurulusun kullanimini hedeflemekte olup, mesajda yer alan bilgiler kisiye ozel ve gizli

Hi anyone know if i can connect a Grandstream HandyTone 488 to Asterisk ? Actually my HandyTone 488 are connected to: wan port to my lan line FXO port are connected to my local analogic line i want that when a call in by my analog line, it's sent to my asterisk for other voip post can answer .. it's possible ? thanks bye

Hi I have a analog phone connected to my Gateway Handytone and registered to Asterisk 1.4 I have configured my HandyTone 488 (in the section FXS Port) for make and receive calls, however I can not transfer a call when it come via PSTN. But, when a call come from via IP I can transfer it. [phoneanalog] type=friend secret=XXXXXXX context=local nat=no qualify=yes host=dynamic dtmfmode=rfc2833

Hi, I am quite new to asterisk so I am not sure what is needed to figure out this problem. If more information is needed and not provided I will gladly provide it. I have a very basic asterisk setup. 1 x100p card and a grandstream handytone 286. I can make calls fine to most phone numbers from the handytone device the trouble seems to come when I dial this number 591-1079. It puts me through to

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

There seems to be a problem related to the Grandstream HandyTone-286. When a call is placed through the adapter, the call can be transferred. However, when a call is received through the adapter, the call cannot be transferred. The problem does not exist with a BudgeTone-101 (1.0.4.23) using the same Asterisk configuration and Dial() settings (Ttm). I tried all of the firmware on their BETA

I have an analog Fax machine which I wish to connect to the network and the Asterisk server. It will connect through a GS Handytone 286 converter and then into the LAN. Is there any information out there on what I need to write in *sip.conf* and/or *extensions.conf* to make sure the fax works as a fax? Channel 8 on my T1 is a reserved, dedicated line for the fax number. Do I need to

Hello, I'm trying to configure Asterisk and my Handytone 488 to pass incoming calls coming over PSTN through the FXO port to Asterisk, which will process the calls with voicemail, or some such service. I point the Handytone 488 FXO port configuration to 192.168.0.2 (the machine that is running Asterisk) and have configured a catchall extension to receive the call: [from-pstn] exten =>

For some reason, this didn't go through the first time, maybe because I had JUST signed up. Hello, I'm trying to configure Asterisk and my Handytone 488 to pass incoming calls coming over PSTN through the FXO port to Asterisk, which will process the calls with voicemail, or some such service. I point the Handytone 488 FXO port configuration to 192.168.0.2 (the machine that is running

can someone who has a grandstream handytone 488 working with making outgoing calls through the fxo port please post the parts of their config that deal with this port? i cant quite seem to get it to make outgoing calls despite having tried several completely different ways of making that happen. i have been told that asterisk@home has this built in to just a button hit, but i dont want to

Hi, Yesterday I finaly got my handytone sip adaptor. It works.... But when dialing to and from ISDN I got echo in both ends, I had tried diff. codecs, but then the GS wont work at all - It can do a call, but after 3 'ring' it disconnect. Any hints ? _________________________________________________________________ Scope out the new MSN Plus Internet Software — optimizes dial-up to

Hello, Has anyone gotten a Grandstream BT100 to work with Level 3's 3Tone? I've been able to get my extension to interface with it, but there is no sound and the call on the GS side terminates prematurely. Here is the relavent portion of the SIP.CONF [4007] ; Budgetone BT100 type=friend insecure=yes context=test-budget username=4007 fromuser=4007 callerid=4007 host=dynamic nat=yes

Hi All, I've an Asterisk Server behind a NAT. Using DNAT, I've opened port 5060 and all 10000:20000 udp. Sip configured with externalip and subnet. I've another site, also with NAT, where I map the rtp port (as defined in the client) to map to the local client (DNAT). Using Xlite, this configuration works, it requires using the quality=yes and NAT=yes/always in the sip ext

I have problem with fax machine Panasonic DX600. It's connected to Grandstream Handy Tone 386 which is connected to Asterisk. Asterisk is connected to my SIP provider. To some numbers I can't send FAX, and I get following error on CLI. WARNING[2237] chan_sip.c: Unknown SDP media type in offer: image 31358 udptl t38 I believe that Panasonic DX600 machine supports T38. And when I have

Could anybody shed some light in which device they would use in this situation: Remote office PBX's to be connected via a) Cisco ATA-186 or b) Sipura SPA-2000 or c) Grandstream HT-ATA-286 to go via the net to an * box. Pros / Cons for each device would be appreciated! Thanks Kris

Anyone tried to muck around with using the 488 for both fxs and fxo with asterisk? I've been playing with one for the last couple of days, and it looks like its a little lower quality then the spa3k. No gain settings, echo canceller is less then ideal on long analog pstn loops, etc. Anyone with good experiences?

I am new to VOIP, Linux and Asterisk. Through a lot of reading (this list, voip-info.org, documentation, etc.), I successfully installed FC3 and * on a new Dell SC420 with two X100P connecting to two PSTN lines at my office. I've also installed AMP to help me configure IVRs, call groups, extensions, etc. I use a Handytone-286 ATA and x-lite clients on the internal network and all works