search for: ha8

Hi, I'm reading Digium HA8 manual (page 55). It lists several parameters that can be used to configure a BRI port. More precisely, it suggests that : Term, is the last parameter NT/TE is the one just before (starting from the end). If I'm not mistaken, it seems dahdi_genconf generates /etc/dahdi/system.conf files in wh...

Hi, On a (bogus) system equiped with a Digium HA8 and 8 BRI ports, I'm reading this: # asterisk -rx "dahdi show status" Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO HA8-0000 RED 109 0 0 CCS AMI YEL 0 db (CSU)/0-133 feet (DSX-1) HA8-0000...

Hi, On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18, I inserted a new Digium HA8 + B400M card. My usual installation fails. I can see it listed : # lspci -n | grep d161 01:0b.0 0200: d161:8007 (rev 11) # lspci -vn 01:0b.0 0200: d161:8007 (rev 11) Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at fe5fe800...

Hi, I know this may sound a bit silly but, given some asterisk issue are still open (see http://issues.asterisk.org/jira/browse/ASTERISK-13176 for instance), I'm wondering if there is a recommended way to configure an used port from a Digium HA8 + B400M board. At the moment, my console is full with messages such as : [Jun 15 09:06:25] WARNING[2140]: chan_dahdi.c:3369 pri_find_dchan: No D-channels available! Using Primary channel 9 as D-channel anyway! [Jun 15 09:06:25] WARNING[2141]: chan_dahdi.c:3369 pri_find_dchan: No D-channels availa...

...ault) (Echo Canceler: oslec) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 02) Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 03) The trouble is before that, I hand edited /etc/dahdi/system.conf with : # Span 1: WCBRI/0/0 "HA8-0000 Board 1" (MASTER) span=1,0,0,ccs,ami,term,te # termtype: te bchan=1-2 hardhdlc=3 echocanceller=oslec,1-2 What I should I change in system.conf to configure a span in NT mode ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium...

...channel (Default) (Echo Canceler: oslec) (Slaves: 02) >> Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) >> (Slaves: 03) >> >> >> >> The trouble is before that, I hand edited /etc/dahdi/system.conf with : >> # Span 1: WCBRI/0/0 "HA8-0000 Board 1" (MASTER) >> span=1,0,0,ccs,ami,term,te >> # termtype: te >> bchan=1-2 >> hardhdlc=3 >> echocanceller=oslec,1-2 >> >> What I should I change in system.conf to configure a span in NT mode ? >> > > It's fairly obvious, and do...

Hi, I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines (mISDN) connected on it, everything runs fine. I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1 module of 4 lines. Already had with this machine an RMA on both cards as they was faulty and crashed the server. What happends is that when I connect cables on the HA8 modules (those cables are unpluged from working server and connected to the new one) nothing happend on t...

2011/6/15 A J Stiles <asterisk_list at earthshod.co.uk> > On Wednesday 15 Jun 2011, Olivier wrote: > > At the moment, my console is full with messages such as : > > [Jun 15 09:06:25] WARNING[2140]: chan_dahdi.c:3369 pri_find_dchan: No > > D-channels available! Using Primary channel 9 as D-channel anyway! > > [Jun 15 09:06:25] WARNING[2141]: chan_dahdi.c:3369

...hen setting echocancel=yes in chan_dahdi.conf on a VPMOCT64-equiped system, 128ms hardware echo cancellation was enabled. 1. I'm correct thinking that it is then impossible to switch from hardware to software echo can without removing the VPMOCT64 module itself ? 2. Does the same also apply to HA8 and its VPMOCT032 module ? 3. Are the only options for OSLEC configuration the echocancel=128 or echocancel=256 values in chan_dahdi.conf ? 4. How could be compared user experience with oslec/256, mg2/256, mg2/1024 on a HA8 without hardware module ? Which would you recommend ? Regards

Hi, In my lab, I'm testing BRI spans in NT/ptmp mode. My setup is: asterisk 11.2.1 libpri 1.4.14 dahdi 2.6.1 wctdm24xxp (HA8 hybrid with B400M) SIP phone <----> Asterisk with HA8 <----> Patton SN4638 <----> Asterisk <----> SIP phone The single BRI line I'm testing remains down: CLI> pri show spans PRI span 1/0: In Alarm, Up, Active I'm quite certain this doesn't come from cabling...

...terisk.org/pub/telephony/libpri The release of libpri 1.4.13 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following are the issues resolved in this release: * --- Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards. (Issue AST-598. Reported by Trey Blancher) * --- Implement handling a multi-channel RESTART request. (Closes issue PRI-93. Reported by Marcin Kowalczyk) * --- Removed MDL/TEI management configuration warning message. (Closes issue PRI-137. Reported by Bart Conin...

...tr (0x8e06788). Dropping call. [Mar 26 10:52:10] WARNING[2643] sig_pri.c: Span 1: Got SETUP with duplicate call ptr (0x8e06788). Dropping call. Do you have any pointer to correct this ? My setup is : Asterisk 11.2.1 DAHDI Version: 2.6.1 Echo Canceller: HWEC, OSLEC libpri version: 1.4.14 Digium HA8 with BRI module single BRI line in TE/Ptmp mode An extract from chan_dahdi.conf : [channels] layer1_presence=ignore layer2_persistence=keep_up Restarting Dahdi seems to cure consequences. I'm suspecting this relates to energy saving mode but I don't really how to handle this. Suggestio...

...cally at boot. Shall I find an /etc/init.d/dahdi file or equivalent ? If positive which command produces this file ? I would expect dahdi-linux or dahdi packages to install these file. > Waht hardware device do you > have? > # dahdi_hardware pci:0000:04:05.0 wctdm24xxp+ d161:8007 HA8-0000 > > -- > Tzafrir Cohen > icq#16849755 jabber:tzafrir.cohen at xorcom.com > +972-50-7952406 mailto:tzafrir.cohen at xorcom.com > http://www.xorcom.com > > -- > ____________________________________________________________________...

...ch command produces this file ? > > I would expect dahdi-linux or dahdi packages to install these file. > > > > > > > Waht hardware device do you > > > have? > > > > > > > # dahdi_hardware > > pci:0000:04:05.0 wctdm24xxp+ d161:8007 HA8-0000 > > Traditionally dahdi has been shipped with a modprobe.d configuration > file to blacklist all of the PCI cards. This was because the order in > which they were loaded was not well-defined. > > This is irrelevant on a system with a single device. And anyway, > irrelevant...

...mesg but, after a reboot, it seems to pass ! (The dark side of things is I still don't understand how to write a dahdi installation script which could run without rebooting but that's another story). Anyway this thread topic was to check if I needed a live PSTN connection to configure this HA8 board and the answer is no. Thanks for helping -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101202/9dfe6f99/attachment.htm

...1:0b.0 disabled [ 33.544757] wctdm24xxp: probe of 0000:01:0b.0 failed with error -5 [ 34.157817] dahdi: Registered tone zone 2 (France) [ 38.873158] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 47.462040] dahdi: Detected time shift. My setup is : Asterisk box with HA8+B400M <---ISDN/BRI----> Patton SN4638 <----SIP---> Asterisk Patton SN4638 is configured to behave as telco node (ie NT/PtmP). To narrow my research scope, I'm wondering if the followin sentence is true : "if you load a dahdi module with a modprobe command (like modprobe wct...

Hello, After all these years installing from source, I'm giving Dahdi package installation a try on a recent Stretch box. Google over the web, I didn't find too many doc on this topic. 1. Is this one [1] up-to-date ? Reading Stretch I would say a single asterisk-dahdi would be enough to install asterisk dahdi and libpri. 2. On my box, the following fails. What would you suggest ?