search for: gx270

Hi, am using latest C6 on a Dell GX270 with latest Bios. It fails to power down but restarts when running $ sudo poweroff I tried some google hints for kernel boot option: acpi=force no help, looks like acpi is working anyway when looking in dmesg acpi=off makes e1000 nic fail to initialize Any suggestions? Rainer

Dear All, I have recently installed centOS 5 on DELL pentium 2.7ghz (model optiplex GX270) and have 512 memory but the OS free command show me Mem: 473876 469892 3984 0 11288 69384 -/+ buffers/cache: 389220 84656 Swap: 1020088 0 1020088 also cat /proc/meminfo show me same MemTotal: 473876 kB MemFree: 4108 k...

...riginally posted to fedora-users] I'm having difficulty getting samba/winbind to authenticate of a W2K3 box. I've searched the list archives and although there are some similar problems, none have seemed to help resolve this one. Here's the network configuration: - Windows 2003 Server gx270-rmaniar [192.168.0.100] - Fedora Core 3 gx280rmaniarFC3 [192.168.0.5] FYI: A Windows XP box correctly connects to the DC OK. ********************** Here's what I've done: - removed the Active Directory service from the W2K3 box and started from scratch again. - configured /etc/krb5.conf...

We currently have a 15-phone system using Asterisk, a combination of analog phones/Grandstream HandyTone-286 and Grandstream BT101s, and 4 X100Ps connected to analog lines. The system works well except for the occasional echo problem. I have all the echo parameters configured, removed all the extra incoming analog lines except to the PBX, etc. following all the advice on the wiki and on the

Hi A Optiplex GX270 with bios A06 (latest) freezes at the menu when I use 3.08pre5. Setup was simple menu (menu.c32) and pxe. When I tested with 3.07 everything worked as normal. I Have not had any problem with 3.08pre5 in other tests and machines. Also but not that important, I learned that for the hotkey highlig...

...chigst.com/hdd/support/download.htm#DFT) Version 4.16. At first it was a trickle, and now it seems I am having the issue with more hardware. I downgraded to syslinux 3.81, and everything is happy again. The Current hardware that seems to be repeatable across several machines is a Dell Optiplex GX270. I unfortunately didn't think to log the different machines that were having these issues. I did not attempt to try raw/int/bigint/etc since I knew this worked before, and I was pretty sure this model worked just fine. Using pxelinux.0 / matched memdisk / tftpd-hpa. I have access to these...

...r 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did > you remember to plug in the power cable? So I disconnect other power devices in the box (Dell Optiplex GX270) such as the Zip drive and CDROMs, but no luck. Then I took an external power supply with molex connector (http://www.coolerguys.com/840556029977.html or http://www.cablesonline.com/mo4inpotoacp.html) and tried that with still the same thing. How much power does this card need? The AC a...

I have decided to move on from Asterisk@Home and start compiling asterisk myself now. I got a dedicated box and put my X100P in it. I installed the server version of CentOS 4.2 (2.6.9-22.EL kernel) barebones. The box is a dell GX270 workstation with 1GB of RAM. I got a fresh copy of O'Reilly's Asterisk the future of technology and begun. I downloaded the zaptel-1.2.4.tar.gz, libpri-1.0.9, and asterisk-1.2.5. I started compiling the zaptel (make && make install && make clean) when I try to start zaptel -...

Hi list, my media center PC is freshly installed with Debian 10.2 "Buster". It doesn't support Geforce 6800 GT (NV40) boards through the nvidia nor the nvidia-legacy drivers any longer. The legacy drivers worked up until Debian 9 "Stretch", but no longer. I know that the hardware works because I can boot SystemRescueCD from CD and get a flawless desktop presentation on

git://git.zytor.com/users/genec/syslinux.git Branch memdiskdbg-for-sha0 This starts with adding another check in two of the disk probes (by Shao; Thank you), expands the debug output, adds an additional check in the third probe and expands/reorders the debug output. At this time, it appears to resolve the MEMDISK issues that Jason Vasquez first noticed. The additional check in the third probe

Hi all, I installed CentOS 5 on DELL machine. Then, When the system comes up, I always get below erros. Could you pls help me to solve this out before I setup this box for productiuon use ? these are errors. usb 1-2: device not accepting address 2, error -71 ata2: port failed to respond (30 secs) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: SRST failed (status

Hi Last week I installed Asterisk (release1) with digium t100p single span T1 (wct1xxp) board on Dell GX270 pc configured for PRI. Asterisk/t100p is currently the only user of the t1 line. All worked well for about a half a day, PSTN to SIP phones to non-SIP IP phones etc. Alas, since then I consistently get multitudes of blue alarms on all b-channels followed by a loss of d-channel: Aug 31 16:33:49 WA...

I am trying to set up a new 1400x900 widescreen monitor, but I just cannot get it to work correctly. The closest I get is 1400x900, which causes lots of vertical blur bands. I have tried with two different machines with i945 and ATi cards, running CentOS 4 and Ubuntu, always with the same result. My investigations indicate that the monitor reports itself to be "1440x900". It also

...ptop, but am a little leery, because I think I've a got a hard drive failing. At any rate, thank you *again* for all your hard work. I don't know if I'm imagining it or not, but overall speed seems to be slightly "snappier" with the new update. -- RonB CentOS 5.5 - Optiplex GX270

After almost 40 hours of work and testing over 6 computers I have finally figured out the answer to my problem of Roaming profiles not updating. This has occurred with SAMBA versions 2.2.* and later up through and including 3.0.2a (completely clean install in each case, including rebuilding domain, users and groups and smb.conf from scratch). It does not appear to be a SAMBA issue but one

Before I lay out the problems I am currently suffering from let me describe my environment: Dell OptiPlex GX270 2.6Ghz 512MB Ram RedHat Linux Fedora Core 3 with all current updates. Samba compile is version 3.0.20 stable. Uname -a: Linux theo.hq.navis.net 2.6.12-1.1378_FC3 #1 Wed Sep 14 04:24:31 EDT 2005 i686 i686 i386 GNU/Linux Everything was running fine until my last YUM update. Where upon my ma...

Guys. What do you think about Dell hardware and Asterisk? Whos using it, comments, any special specs recommended or models?

A kind request for help please. MEMDISK is causing an issue with the Dell OptiPlex GX280 and GX620 platforms. Booting a PC-DOS/Ghost, disk image is successful (and proper) when using version 3.83. See results below: MEMDISK 3.83: Ramdisk at 0x07eeaa00, length 0x007bc000 command line: initrd=images/ghostclient/280_620/osbootc.img BOOT_IMAGE=memdisk MEMDISK: Image seems to have fractional end