search for: gluster1

...a20-1 Firstly, is it mandatory to mount ext3 file systems with 'user_xattr'? The issue I'm having is that I would like to delete a gluster volume and create a new one. Gluster isn't allowing me to do so: [root at compute-0-0 ~]# gluster volume create cloudfs replica 2 compute-0-0:/gluster1 compute-0-1:/gluster1 compute-0-2:/gluster1 compute-0-3:/gluster1 'compute-0-0:/gluster1' has been part of a deleted volume with id d83317f2-0c13-4481-bd0a-838fc013ceff. Please re-create the brick directory. So, I'm trying to delete the brick directory but the xattrs remain: [root at...

...fsSpeedTest -s 13g -y -b 64k pir4: Write test (dd): 204.297 MB/s 1634.375 mbps 65.160 seconds pir4: Read test (dd): 340.427 MB/s 2723.419 mbps 39.104 seconds For reference/control, here''s the same test writing straight to the XFS filesystem on one of the gluster storage nodes: [sabujp at gluster1 tmp]$ /sb/admin/scripts/nfsSpeedTest -s 13g -y gluster1: Write test (dd): 398.971 MB/s 3191.770 mbps 33.366 seconds gluster1: Read test (dd): 234.563 MB/s 1876.501 mbps 56.752 seconds [sabujp at gluster1 tmp]$ /sb/admin/scripts/nfsSpeedTest -s 13g -y -b 64k gluster1: Write test (dd): 442.251 MB/s...

...virtualization nodes: Centos 7, Gluster 3.8.12 (managed by OVirt engine) > > > > After todays reboot of one of the storage nodes the recovery did not finish > > successfully. The state of one brick remained in: > > > > [root at cfiler301 dom_md]# gluster volume heal gluster1 info > > ... > > Brick cfilers201:/var/data/brick1/brick > > /b1de7818-020b-4f47-938f-f3ebb51836a3/dom_md/ids > > Status: Connected > > Number of entries: 1 > > ... > > > > The above file is used by sanlock runing on the OVirt nodes to handle VM &gt...

Sure! > 1 - output of gluster volume heal <volname> info Brick pod-sjc1-gluster1:/data/brick1/gv0 Status: Connected Number of entries: 0 Brick pod-sjc1-gluster2:/data/brick1/gv0 Status: Connected Number of entries: 0 Brick pod-sjc1-gluster1:/data/brick2/gv0 Status: Connected Number of entries: 0 Brick pod-sjc1-gluster2:/data/brick2/gv0 Status: Connected Number of entries: 0...

The sizes of the files are extremely varied, there are millions of small (<1 MB) files and thousands of files larger than 1 GB. Attached is the tier log for gluster1 and gluster2. These are full of "demotion failed" messages, which is also shown in the status: [root at pod-sjc1-gluster1 gv0]# gluster volume tier gv0 status Node Promoted files Demoted files Status run time in h:m:s --------- ---------...

...ure if that gives you any clues for this... maybe adding another brick to the pool would have a similar effect? On Thu, Dec 21, 2017 at 11:44 AM, Tom Fite <tomfite at gmail.com> wrote: > Sure! > > > 1 - output of gluster volume heal <volname> info > > Brick pod-sjc1-gluster1:/data/brick1/gv0 > Status: Connected > Number of entries: 0 > > Brick pod-sjc1-gluster2:/data/brick1/gv0 > Status: Connected > Number of entries: 0 > > Brick pod-sjc1-gluster1:/data/brick2/gv0 > Status: Connected > Number of entries: 0 > > Brick pod-sjc1-gluster2...

...s of the files are extremely varied, there are millions of small >> (<1 MB) files and thousands of files larger than 1 GB. The tier use case is for bigger size files. not the best for files of smaller size. That can end up hindering the IOs. >> >> Attached is the tier log for gluster1 and gluster2. These are full of >> "demotion failed" messages, which is also shown in the status: >> >> [root at pod-sjc1-gluster1 gv0]# gluster volume tier gv0 status >> Node Promoted files Demoted files Status >> run time in h:m...

...no glusterfs expert and also not a expert for virtualization and what has to be done to let all components play well together... Thanks for your support! Here some infos about our glusterfs setup, please let me know if you need more infos. We are using Ubuntu 22.04 as operating system: root at gluster1:~# gluster --version glusterfs 10.1 Repository revision: git://git.gluster.org/glusterfs.git Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> GlusterFS comes with ABSOLUTELY NO WARRANTY. It is licensed to you under your choice of the GNU Lesser General Public License, version...

Thanks for the info, Hari. Sorry about the bad gluster volume info, I grabbed that from a file not realizing it was out of date. Here's a current configuration showing the active hot tier: [root at pod-sjc1-gluster1 ~]# gluster volume info Volume Name: gv0 Type: Tier Volume ID: d490a9ec-f9c8-4f10-a7f3-e1b6d3ced196 Status: Started Snapshot Count: 13 Number of Bricks: 8 Transport-type: tcp Hot Tier : Hot Tier Type : Replicate Number of Bricks: 1 x 2 = 2 Brick1: pod-sjc1-gluster2:/data/hot_tier/gv0 Brick2: pod-s...

...he access count on files are blocked? On Wed, Jan 10, 2018 at 10:17 AM, Tom Fite <tomfite at gmail.com> wrote: > The sizes of the files are extremely varied, there are millions of small > (<1 MB) files and thousands of files larger than 1 GB. > > Attached is the tier log for gluster1 and gluster2. These are full of > "demotion failed" messages, which is also shown in the status: > > [root at pod-sjc1-gluster1 gv0]# gluster volume tier gv0 status > Node Promoted files Demoted files Status > run time in h:m:s > ---...

Hi, Can you send the volume info, and volume status output and the tier logs. And I need to know the size of the files that are being stored. On Tue, Jan 9, 2018 at 9:51 PM, Tom Fite <tomfite at gmail.com> wrote: > I've recently enabled an SSD backed 2 TB hot tier on my 150 TB 2 server / 3 > bricks per server distributed replicated volume. > > I'm seeing IO get blocked

...no glusterfs expert and also not a expert for virtualization and what has to be done to let all components play well together... Thanks for your support! Here some infos about our glusterfs setup, please let me know if you need more infos. We are using Ubuntu 22.04 as operating system: root at gluster1:~# gluster --version glusterfs 10.1 Repository revision: git://git.gluster.org/glusterfs.git Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> GlusterFS comes with ABSOLUTELY NO WARRANTY. It is licensed to you under your choice of the GNU Lesser General Public License, version...

...nstall] WantedBy=multi-user.target After create it remember to reload the systemd daemon like: systemctl enable glusterfsmounts.service systemctl demon-reload Also, I am using /etc/fstab to mount the glusterfs mount point properly, since the Proxmox GUI seems to me a little broken in this regards gluster1:VMS1 /vms1 glusterfs defaults,_netdev,x-systemd.automount,backupvolfile-server=gluster2 0 0 --- Gilberto Nunes Ferreira (47) 99676-7530 - Whatsapp / Telegram Em qua., 7 de jun. de 2023 ?s 01:51, Strahil Nikolov <hunter86_bg at yahoo.com> escreveu: > Hi Chris, > > here is a li...

...ly no glusterfs expert and also not a expert for virtualization and what has to be done to let all components play well together... Thanks for your support! Here some infos about our glusterfs setup, please let me know if you need more infos. We are using Ubuntu 22.04 as operating system: root at gluster1:~# gluster --version glusterfs 10.1 Repository revision: git://git.gluster.org/glusterfs.git Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> GlusterFS comes with ABSOLUTELY NO WARRANTY. It is licensed to you under your choice of the GNU Lesser General Public License, version...

...ot a expert > for virtualization and what has to be done to let all components play well > together... Thanks for your support! > > Here some infos about our glusterfs setup, please let me know if you need > more infos. We are using Ubuntu 22.04 as operating system: > > root at gluster1:~# gluster --version > glusterfs 10.1 > Repository revision: git://git.gluster.org/glusterfs.git > Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> > GlusterFS comes with ABSOLUTELY NO WARRANTY. > It is licensed to you under your choice of the GNU Lesser > Ge...

...and what has to be done to let all components play > well > > together... Thanks for your support! > > > > Here some infos about our glusterfs setup, please let me know if you need > > more infos. We are using Ubuntu 22.04 as operating system: > > > > root at gluster1:~# gluster --version > > glusterfs 10.1 > > Repository revision: git://git.gluster.org/glusterfs.git > > Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> > > GlusterFS comes with ABSOLUTELY NO WARRANTY. > > It is licensed to you under your choice...

...d2665] /usr/lib64/glusterfs/3.0.0/xlator/mount/fuse.so[0x2b55b18d88ff] /lib64/libpthread.so.0[0x3a67606367] /lib64/libc.so.6(clone+0x6d)[0x3a66ad2f7d] --------- Here's the client configuration: volume client-stripe-1 type protocol/client option transport-type ib-verbs option remote-host gluster1 option remote-subvolume iothreads end-volume volume client-stripe-2 type protocol/client option transport-type ib-verbs option remote-host gluster2 option remote-subvolume iothreads end-volume volume client-stripe-3 type protocol/client option transport-type ib-verbs option remote...

...omponents play >> well >> > together... Thanks for your support! >> > >> > Here some infos about our glusterfs setup, please let me know if you >> need >> > more infos. We are using Ubuntu 22.04 as operating system: >> > >> > root at gluster1:~# gluster --version >> > glusterfs 10.1 >> > Repository revision: git://git.gluster.org/glusterfs.git >> > Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> >> > GlusterFS comes with ABSOLUTELY NO WARRANTY. >> > It is licensed to yo...

...well > > together... Thanks for your support! > > > > Here some infos about our glusterfs setup, please let me know if you > need > > more infos. We are using Ubuntu 22.04 as operating system: > > > > root at gluster1:~# gluster --version > > glusterfs 10.1 > > Repository revision: git://git.gluster.org/glusterfs.git > > Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/> > > GlusterFS comes with ABSOLUTELY NO WARRANTY. > > It is...

...gluster would check for free space before writing to a brick. It's very easy to test, I created a distributed volume from 2 uneven bricks and started to write to it; as one of them got full I started getting write failures. This is how I tested: ======================= [root at localhost gluster1]# for i in `seq 1 20`; do df -h /mnt/gluster1/; dd if=/dev/zero of=16_$i bs=16M count=1; done Filesystem Size Used Avail Use% Mounted on 192.168.192.5:/test 291M 16M 276M 6% /mnt/gluster1 1+0 records in 1+0 records out 16777216 bytes (17 MB) copied, 0.115813 s, 145 MB/s Filesyst...