search for: gbyte

...t 48588 [ 5] local 10.10.15.193 port 5001 connected with 10.10.15.187 port 49231 [ 6] local 10.10.15.193 port 5001 connected with 10.10.15.188 port 53197 [ 7] local 10.10.15.193 port 5001 connected with 10.10.15.189 port 55309 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec [ 5] 0.0-10.0 sec 872 MBytes 728 Mbits/sec [ 6] 0.0-10.0 sec 318 MBytes 267 Mbits/sec [ 7] 0.0-10.0 sec 1.10 GBytes 939 Mbits/sec [ 8] local 10.10.15.193 port 5001 connected with 10.10.15.184 port 48589 [ 4] local 10.10.15.193 port 5001 connected with 10.10.15.18...

I am working with some large text files (up to 16 GBytes). I am interested in extracting the words and counting each time each word appears in the text. I have written a very simple R program by following some suggestions and examples I found online. If my input file is 1 GByte, I see that R uses up to 11 GBytes of memory when executing the program...

"to memory" means: mounting a ~2 GByte filesystem [ tmpfs?, or ramfs? ], and put the "/tmp" on it. [ e.g.: 4 GByte ram in the pc ]. what to write in the "/etc/fstab"? I would like to collect the [ answers too:P ]: Advantages: - Memory is way faster then HDD/SSD, so it could speed things up - "SSD amortiz...

Hi, I have a HP DL 585 server with Quad Opteron processors and 32 Gbytes of RAM. I would like to know whether CentOS 3.5 x86_64 will recognize all 4 CPUs and 32 Gbytes of RAM. I will also running EDA tools like PriteTime, and Magma on this server. Does CentOS has any issues with these tools? your help on this question is appreciated. Thanks Siva. -------------- nex...

I''ve just uploaded 0.9.11-pre7. save/restore should be working for 32 bits on both SMP and UP, and maybe for 64 bits although it''s not tested. If someone could test migration it would be much appreciated. The installer seems to not install the drivers under 64 bit environment... but they can then be installed manually. Not sure why at this point.

I''ve just uploaded 0.9.11-pre7. save/restore should be working for 32 bits on both SMP and UP, and maybe for 64 bits although it''s not tested. If someone could test migration it would be much appreciated. The installer seems to not install the drivers under 64 bit environment... but they can then be installed manually. Not sure why at this point.

...malloc: *** set a breakpoint in szone_error to debug R(311,0xa000d000) malloc: *** vm_allocate(size=1733365760) failed (error code=3) R(311,0xa000d000) malloc: *** error: can't allocate region R(311,0xa000d000) malloc: *** set a breakpoint in szone_error to debug This is on an Intel Mac with 2 GBytes of RAM running MacOS X vs. 10.4.11 The very same result appears on an 8 core Intel Mac with 6 Gbytes of RAM and on a Linux Box with 2 GBytes of RAM. Is there a way to bypass this and let R allocate the necessary memory? Is this a system problem? Would it be resolved in a mainframe for example? th...

apt-get update apt-clone upgrade Any first impressions? -- Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org ______________________________________________________________ ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org 8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE

I appear to be seeing the performance of a local ZFS file system degrading over a short period of time. My system configuration: 32 bit Athlon 1800+ CPU 1 Gbyte of RAM Solaris 10 U6 SunOS filer 5.10 Generic_137138-09 i86pc i386 i86pc 2x250 GByte Western Digital WD2500JB IDE hard drives 1 zfs pool (striped with the two drives, 449 GBytes total) 1 hard drive has an 8 Gbyte UFS slice holding the OS root filesystem My test consists of re...

...-------------------------- Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 196.34.x.x port 5001 connected with 196.34.x.x port 45453 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 1.09 GBytes 935 Mbits/sec root at zaxen02:[~]$ iperf -c zaxen01 ------------------------------------------------------------ Client connecting to zaxen01, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 196.34.x.x port 45453 conn...

Hello, I have a dovecot IMAP server (relative small hardware: HP Microserver with 6 Gbyte RAM, linux soft RAID1 with 2x 7200 SATA disk) with 100 Gbyte maildirs. Server works fine but sometimes I can open mails slowly (5-10 sec), typical with new mails. It's intresting when I open an another old mail (with 0 sec wait), after new mail open quickly. Is it dovecot mail indexes or I/O...

...bout as important to bringing video production and distribution to the masses as more efficient video compression. I'm wondering how much of a difference BitTorrent made in the downloads of the theora sample files. Is there a record of the number of downloads that were made, and the number of Gbytes that were sent from the server with BitTorrent compared with the number of of Gbytes that would have been sent without BitTorrent? Thanks, John

...ing parameters: size=64k -d su=1024k,sw=7) - Average file size in the share: 8 MByte - Gigabit network composed by Cat5E certified cabling and DLink DGS-3427 gigabit switch. - Intel I7 based terminals with Intel gigabit NIC, running Windows 7 Test results: OS access: Sequential write (1 x 31 GByte file): 500 MByte/s Sequential read (1 x 31 GByte file): 780 MByte/s Write (1000 files 8 MByte each): 249 MByte/s average Read (1000 files 8 MByte each): 158 MByte/s average Simultaneous write (4 processes each writing 1000 files of 8 MByte each ): 188 MByte/s average Simultaneous read (4 processes...

Hello, I am new to R, can anyone give me an idea of how R handle a large dataset (e.g. couple of Gbytes)? Thanks a lot! Best, Mingjun

I installed a 32 bit Windows 2003 enterprise edtion domU. xm list shows the domU has 7G RAM. But Windows 2003 shows only 3.75G RAM. I do not know what''s wrong. Anyone knows? [root@sjd-hot w2k3e]# xm info host : sjd-hot.rashost.com release : 2.6.18.8-xen version : #1 SMP Fri Nov 27 03:53:01 UTC 2009 machine : x86_64 nr_cpus

Currently the resize command is under filesystem, and takes a path to the mounted filesystem. This seems wrong to me. Shouldn''t it be under device, and take a path to a device to resize? Otherwise, how can a resize operation when you have multiple devices make any sense? -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to

Hello Gurus, 1. Do you have any idea whether CentOS 3.5 is built out of RHEL AS or RHEL ES? 2. Can a single process use more than 32 Gbytes of RAM in CentOS 3.5 ? Is there any limitation that you experienced? Thanks for your time. Siva. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20051027/3220b2ff/attachment-0001.html>

Let me begin stating that I read all help files and faq's on the subject matter (there aren't more than about a dozen) but either did not find solutions or found them not to work. Here is the issue. I am trying to run a spatial regression on a medium-sized dataset. Part of the functions in the spdep package I use require me to allocate a vector of 1.1 Gb (mine is not a spatial SIG

Hi Shannon, >Type of backend bandwith(GBytes/sec) >virtio-net 0.66 >vhost-net 1.49 >vhost-net with irqfd 2.01 > >Test cmd: ./iperf -c 192.168.0.2 -P 1 -i 10 -p 5001 -f G -t 60 Impressive results ! Could you please detail your setup ? which platform are you using and which GbE controller ? As a re...

Hi Shannon, >Type of backend bandwith(GBytes/sec) >virtio-net 0.66 >vhost-net 1.49 >vhost-net with irqfd 2.01 > >Test cmd: ./iperf -c 192.168.0.2 -P 1 -i 10 -p 5001 -f G -t 60 Impressive results ! Could you please detail your setup ? which platform are you using and which GbE controller ? As a re...